Fault Detectors - For lumps and neckdowns

Highest Detection Accuracy Thanks to Unique 3-Axis Scanning Technique KW Fault Detectors - Fault Detection Highest Detection Accuracy Thanks to Unique 3-Axis Scanning Technique KW 13TRIO / KW 33TRIO (3 axis) A unique measuring principle and complex optics solution, ensure immunity to stray and intense light whilst providing the highest detection accuracy and identification of lumps and neckdowns in the micrometer range. Fully digit signal processing DSP Very compact design Your demands for a reliable and flawless detection of extrusion faults and surface defects are ever increasing. This applies to extrusion, jacketing, enameling, drawing, and many other areas. For this reason the use of optical fault detectors ("lump detectors") is very popular. These photometric detectors are able to detect small lumps, neckdowns, and other defects on wires, cable, tubing etc., without being influenced by product parameters, line speed, vibration etc. 3 times higher detection reliability (TRIO models) than conventional 2 axis systems Theoretically unlimited life expectancy Non-sensitive to stray light Flexible mounting concept Integrated air curtains for cleanliness of windows Defect classification and printout All data ports like RS-232, RS-422 and RS-485 as well as analog and PROFIBUS DP are available. Main Data: Principle: Photometry Light Source: Visible LED Max Diameter: Approx. 30 mm (1.18 in.) Max Line Speed: 3000 m/min (9850 ft/min) 3 times higher detection reliability (TRIO models) than conventional 2 axis systems Theoretically unlimited life expectancy Non-sensitive to stray light Flexible mounting concept