Gear motor:MR 615 30 Q

Length L of the gearmotor as a funtion of reduction and outlet number of revolution with the standard motor 737
22 output W 5000 Rpm loadness, 12/24 Vdc. Outlet shaft is supported by two coupled screened bearings.
The motor and the reduction gear are both plated for corrosion strength. The motor has an electrical suppressor system
for the CE standard.
* The speed rotation can change of ± 10%.
The S1 load test was made using a 1 A corrent in the air with an increase of temperature of 70° C.
The S2 load test was made using a 1,7 A corrent in the air with a timing 5` ON 5` OFF with an increase of temperature
of 80° C max. The starting corrent is 5.4 A and cannot be mantained for more than 2.
Max forces which may act on the outlet shaft: Axial 20 kg, Radial 30 kg on the extremity of outlet shaft.
Possibility to apply other motor types Ø 40 with different voltage and RPM and encoder.