Watco Safety Grip Cold Cure - Anti Slip Concrete Paint

Epoxy paint

Vote

“ For steps, ramps and floors, in wet or oily areas. Coarse anti slip finish to reduce accidents Heavy duty with excellent chemical resistance Slip resistant even when wet or oily Easy one coat application for concrete, metal or wood Our best selling coating for over 40 years ”

Ask for a quote

Presentation

Watco Safety Grip is a heavy duty, coarse textured, anti slip, two pack epoxy resin coatings designed to provide a safe surface both inside and out. Using one high build coat of Safety Grip minimises the risk of accidents throughout the workplace, particularly for wet or oily areas. All grades now carry CE Mark EN 1504-2 and have test results for slip resistance, abrasion, scratch and impact resistance, as well as for adhesion and hardness. They are also chemical resistant and have an A+ VOC emissions rating with a low level of VOC.

Recommended areas of use

Slippery, hazardous, wet or oily areas
Around machinery
Steps, ramps/ disabled ramps, foot bridges
Loading bays, walkways and entrance ways
Car parks
Around vibrating machinery (see Safety Grip Flex)

Technical features

Suitable for: Concrete well bonded paint, flat metal Finish: Glossy, coarse texture Interior and exterior Composition: 2 part, 100% solids epoxy resin Number of components: 1 x curing agent, 1 x resin and 1 x anti slip particles. Coverage: 5m² per unit Number of coats: 1 Mix ratio: Safety Grip/Cold Cure: Up to 30 minutes at 20°C. Rapid: Up to 20 minutes at 20°C. Flex: Up to 25 minutes at 25°C Dry film thickness: Approximately 320 microns Curing time: 16 hours at 20°C

Download the complete technical features

Opinion on the product