ABES Feeder-Bollard 300-1 is a cylindrical tube with two grooves at the top and a flattened upper end. Access to the internal circuit via a lockable door, including cable slide. – Hot-dip galvanised steel ST 37, cast aluminium top. – Powder coating in standard RAL colours or DB 703. – Standard design with adapter plate without electricity and water connections. – Incl. cable slide (operation possible with the flap closed). – Equipment to enable electricity and water connections is available on request. Overview for ABES Feeder-Bollard 300-1: – Steel tube, powder coated in RAL or DB 703 Glimmer grey. – Cast aluminium top with 2 parallel grooves. – Lockable door with cylinderlock. – Fixed mounting (Screwed to the floor from the inside). – Measurements (H above the ground x Ø in mm): 1335 x 245. – Measurements of the door: 845 mm x 225 mm, incl. cable slide.