Both a multifonction calibrator (IN and OUT) and a 2-channel thermometer (IN / IN), CALYS 150 is the most accurate and advanced model of the range:
- 50 ppm calibration precision in temperature
- Resistance: Up to 0.006% RDG, 50 KΩ range
- Current: Up to 0.007% RDG, 100 mA range + 24 V loop supply
- Voltage: Up to 0.005% RDG, 50 V range
- Frequency: Up to 0.01% RDG, 100 KHz range
- Pressure by external module
- Calibration of thermistors and HART transmitters
- Test of thermostats and pressostats
- Automatic calibration of transmitters and indicators
It is the perfect tool for advanced process maintenance and use on test bench in all industries. Providing extended functionalities (temperature simulation, scaling, steps, synthesizer, statistical functions…) and audit trails, CALYS 150 complies with both 21 CFR Part 11 and NADCAP Heat Treatment standards and makes advanced data exploitation and full data traceability easier.
Easy-connect system®
Connect your probes by simply pushing on the terminal top and insert wires of up to 3 mm or 10 AWG diameter and compensated thermocouple connectors.
Wires are held tight between two brass plates ensuring thermal stability and a very good cold junction compensation for thermocouples.
This system also enables 4 mm banana plugs and security connectors to be connected on the terminal top.
All you need to run your factory !