For 2-sided machining by 90 ° pivoting of all non-ferrous alloy profiles, in particular aluminum and thin steel profiles.
Copy milling template or stop system, offering the possibility of milling the 2 faces of a profile and successively the top then the bottom of the profile with milling cutters.
This machine, mounted on fixed frame is equipped with:
• TRI 400 V motor, power 0.35 / 0.45 kW, 2 spindle speeds 5000 and 10000 rpm.
• Milling head.
• Pneumatic clamping system by 4 cylinders (vertical and horizontal) mounted on a console allowing the profile to rotate 90 ° along its axis, the locking in position is pneumatic.
• Pneumatic locking device of the head along the vertical axis.
• Control lever for raising and lowering the milling head.
• Control lever for moving the milling head horizontally.
• Template with 1 pneumatic copying finger Ø 5/6/8 mm.
• 6-position revolver stop.
• Clamp Ø 8 mm.
• Set of lateral supports with stops of 1100 mm length not graduated.
• Spray system controlled by button on the left lever.
• Chip gun.
• Feed path length 500 mm.