Driving with remarkable acceleration, gradeability, and stability is no problem with dual drive motors of GenTX and GenEX, providing added traction, especially on wet or uneven surfaces. Each motors’ speed and direction is proportionally regulated by the steer tire position, and along with a sharp-turn steer axle, enables a small turning radius in comparison with other trucks of the same performance class.
Fully enclosed wet multi-disk brakes provide constant brake performance even in humid, abrasive or corrosive environments. GenTX and GenEX react precisely and dynamically to the operator’s lift and tilt requirements through standard AC pump motor and controls.
Clark’s unrivaled performance in the forklift industry comes from unique and robust construction. Enclosed canted rollers minimize deflection, as well as free-play in both the upright and carriage. Six carriage load rollers evenly spread out the load, which significantly improves roller life. Side thrust rollers prevent racking during off-center loading, and massive high-strength steel fork bars prolong service life. Side thrust rollers prevent racking during off-center loading, and massive high-strength steel fork bars.
GenTX and GenEX come standard with a hydraulic pump control and full proportional lift. The pump motor only turns as fast as is needed for use, using only the required energy. Regenerative braking is available by releasing the accelerator pedal, changing direction of travel or applying the service brake, returning energy to the battery and not to the brakes in the form of heat.
The full AC system of GenTX and GenEX has made brush and contactor changes a thing of the past and the semi-permanent wet disc brake needs no adjustment and no periodic replacement of brake pads.
Industry proven components provide for high reliability, resulting in less down time. All motors are fully enclosed and are thus protected from water and dust and dirt particles; performance is controlled by monitoring the motor’s temperature should it ever approach its limit. All control elements are enclosed, so they are environmentally protected and additionally mounted high off the ground in the counterweight for protection.
All you need to run your factory !
