• PRODUCTS (15)
  • CATALOGUES (5)
  • WHITE PAPERS

  • PRESS RELEASES

  • Suggested offers
  • 0 results. Did you mean ?
  • Suggested categories
  • 0 results. Did you mean ?
  • Suggested companies
  • 0 results. Did you mean ?
  • Suggested offers
  • 0 results. Did you mean ?
  • Suggested categories
  • 0 results. Did you mean ?
  • Suggested companies
  • 0 results. Did you mean ?
Become a supplier
Help
My account

The news of ADDIPLAST Group

ADDIPLAST at K Show in Dusseldorf in October

août 01, 2019

Additives
The company will present its new innovations focused on new flame retardant grades for EV, lightweighting solutions with natural fibers PP compounds for structural and aesthetic parts, PA & PP carbon fibers reinforced, and its new PPS et PPO range for high mechanical requirements.


Addiplast Group : one R&D Center & two complementary compounding technonologies for the most demanding requirements
The independant French family compounder, set up in 1986, has today 2 production sites : ADDIPLAST & ADDIKEM in Saint Pal de Mons, France (south of Lyon) equipped with twin-screw extruders and  Buss co-kneaders for a total production capacity of 30 000  tons a year.  Both sites are IATF 16949 & ISO 14001 certified.


« Tailor made compounds for automotive, cosmetic & medical, «3E» industries, tolling production under NDA for end-users or big players such as petrochemicals that’s the DNA of Addiplast Group for more than 30 years » says Denis Chantegraille the CEO of Addiplast Group.


Coloration, flame retardancy, fillers like mineral, glass, natural…, biocides, that’s the know-how of the company. The product portofolio is available in Europe, Africa, USA and China.


The recent co-kneaders extrusion investments are especially well-designed for high concentrated polyolefin compounds (high filled up to 80%) & for all temperature-sensitive technical compounds such as Fluoropolymer but not only. 


Addiscience is the Research & Development Center of  Addiplast Group dedicated to innovation (350 formulations each year), quality and  research for new technico-economical solutions. Addiscience is fully equipped with the same production extrusion technologies and characterizations to scale up the new formulation into an industrial production line step very quickly and efficiently.
ADDIPLAST at K Show in Dusseldorf in October
Contact the Supplier

Discover Addiplast Group on K2016

octobre 18, 2016

www.addiplast-group.com
Discover Addiplast Group on K2016
Contact the Supplier

ADDIBATCH Innovation

octobre 18, 2016

YOU WANT TO IMPROVE RIGIDITY AND HEAT DEFLECTION TEMPERATURE ? YOU WANT TO REDUCE WEIGHT ?

Our innovative Extra lamellar Talc PP Compounds in comparison with standard and ultrafine talc.
ADDIBATCH Innovation
Contact the Supplier

ADDIBIO Innovation

octobre 18, 2016

NEW DEVELOPMENTS With various Natural Fibers   Lightweighting& natural aspect trends
ADDIBIO Innovation
Contact the Supplier

BROWSE NOW ON OUR NEW WEB SITE

octobre 18, 2016

www.addiplast-group.com
BROWSE NOW ON OUR NEW WEB SITE
Contact the Supplier

ADDIPLAST ON FAKUMA 2015

septembre 03, 2015

Addiplast will be present and exhibitor in the Hall A4, booth 4003 during the International German fair FAKUMA 2014 in Friedrichshafen from 13th to 17th october;

Addiplast Research Center team invites you in Hall A4-booth 4003 to discover our new ranges ADDIBIO RENEW : biobased renewable reinforced natural fiber compounds, ADDIFLAM : thermoplastic halogen free flame retardant compounds, as well as ADDITEC: ESD & EMI Compounds.

We look forward to welcome you in Hall A4, on our booth 4003 during the fair FAKUMA 2015 !

You are chemist, plastic engineer, designer, research engineer or project manager ?

A real structure of competence and expertise, the Addiplast Research Center is at your disposal.

Our team of chemical & technical engineers, and colourist are ready to accompany you in the various stages of your projects, from the research to the industrialisation of materials corresponding to your areas of interest.
The research centre is dedicated to innovation, to quality and research of new technical-economical solutions.

ADDIPLAST ON FAKUMA 2015
Contact the Supplier

ADDIKEM ON FAKUMA 2015 “Compound and Masterbatch innovation with the development of two technologies of excellence.

septembre 03, 2015

ADDIPLAST GROUP spread its offer adding complementary activities with both ADDIPLAST and ADDIKEM.

Created in 1986 by CHANTEGRAILLE family, managed by the second generation, ADDIPLAST now generates a turnover closed to MEUR 20 with a hundred of employees (ISO 14001 and ISO TS16949 certifications).

With its unique knowledge in formulation, fire proofing and first choice compound coloration (PP Addilene®, PC Additer®, PA Addinyl®), ADDIPLAST added a new company to its core business: ADDIKEM.

Located in the same area as ADDIPLAST, this production plant managed by Maxime CHANTEGRAILLE conduct two main activities:

 

  • Formulation and production of colored MASTERBATCH as well as additives, branded ADDIBATCH®.
  • Pelletizing of specific compounds and masterbatch for polymer producers and manufacturers (subcontracting).
  •  

    Both companies are supported by a common Research Center (9 technicians and engineers) fully equipped with:

     

    • Elementary tools of analysis as well as evaluation of chemical components by scanning electron microscope (SEM)
    • IR and XRF technology measurement devices
    • 1 coloring laboratory
    • 2 laboratory extruders’ lines (from 5 to 2 Kg/h capacity – samples from 5 to 300 Kg)

     

    ADDIPLAST Research Center (CRA) is with an affiliate of ADDIPLAST GROUP, operating at:

     

    • 50% for the customers research benefit, in both chemistry and plastic industries.
    • 50% for the product range development inside the group. Launching of innovating products by grafting technics and reactive extrusion.

     

     

    “Two complementary production technologies”:

     

    ADDIPLAST, with its 25 000 tons/year capacity, possess several twin screw extrusion lines (pelletizing is done either underwater or by strands), for its compounding activity. 40% of its turnover is realized abroad.

    Furthermore, colored polyolefin and cellulose fibers carriers like Addibio Renew® are a “must” in 3E and automotive industries.

     

    ADDIKEM, with its 10 000 tons/year capacity, choses another technology setting in early September 2015 two BUSS Co-kneader lines (+ one twin screw extruder as a security tool for back up).

    This particular technology demonstrate a rotation with back and forth movement of a profiled screw, within a carding cylinder. It’s specifically designed for the compounding of temperature-sensitive materials such as inflating agents, Zero-Halogen flame retarders, reactive silanes, etc, reducing shearing excess.

     

    Both lines with their complementary capacities (from 60 to 250 Kg/h and 500 to 800 Kg/h), produce a grey room environment. This enables ADDIKEM to work together with the subcontracting industry in particular for sensitive high-end products and components intended for the pharmaceutical or alimentary sector, or even used in the technical environment (like special cables, tubes extrusion…) and automotive industry.

    ADDIKEM also manufactures and commercializes its own Masterbatches ADDIBATCH, based on a wide range of components, especially polyolefin PE, EVA & PP, but also TPE, PLA and bio-based resins. These polymer matrixes are modified, reinforced, filled, or colored ,for example with fibers, mineral fillers, pigments, halogen free flame retardant agents, antioxidants, process agents, UV-light blocking agents, nucleating and exo-/or and endothermic blowing agents.

    ADDIKEM also has adequate peripheral facilities which are in both upstream & downstream in the forefront of progress. The mixture of the components, in particular the gravimetric dosing of powders, additives and liquids, has been especially well suited in order to ensure both a high-degree of hygiene and an absolute accuracy in dosing. At the end of the granulation process, the production workshop is equipped with homogenizer silos which enable to ensure the production of 1 to 8T of prime quality products, with an homogeneity guaranty according to specific requirements. The inner quality control laboratory is fitted with elementary analysis tools (flow meter, Karl Fischer, spectrophotocolorimeter…), a multi-platen press, filter test specialized to estimate the quality of dispersions as well as an extrusion line for plastic films.

    Much involved in the long-lasting developments, the R&D department of ADDIKEM focuses on various future-oriented application sectors, the renewable sources, green chemistry (in particular bio-based master batches) and the lightering of components.

     

    For further information: contact@addikem.com

     

    ADDIKEM ON FAKUMA 2015 “Compound and Masterbatch innovation with the development of two technologies of excellence.
    Contact the Supplier

    Arkema and Addiplast sign polyamide deal

    novembre 22, 2013

    Arkema and Addiplast sign polyamide deal

    Arkema has announced a deal with French specialty compounder Addiplast that will see the latter develop a range of specialist polyamide compounds based on Arkema’s resins.

    Under the agreement, Arkema will supply Addiplast with its Rilsamid PA 12 and Hiprolon PA 6-12 speciality long-chain polyamides, as well as its Rilsan PA 11 and Hiprolon PA 6-10, PA 10-10 and PA 10-12 bio-sourced polyamides.

    Addiplast will use the Arkema resins to develop two new lines of specialty injection moulding compounds that it will sell under the Addinyl and Addibio names (covering fossil-based and bio-sourced grades respectively). Key target markets are high-performance applications in the automotive and electronics industries.

    Addiplast, which was set up in 1986 and generates sales of around E17 million, already offers the polymer industry a range of specialty polyamide, polycarbonate and polyolefin compounds for niche applications, including grades using natural fibre reinforcements.

    Arkema is a major producer of bio-sourced long-chain polyamides, a position it bolstered in 2012 through its acquisition of Chinese castor oil-derived sebacic acid producer Casda and castor oil-based PA maker Hipro Polymers.

    ? www.arkema.com

    ? www.addiplast.com

    Arkema and Addiplast sign polyamide deal
    Contact the Supplier

    SAVE THE DATE ADDIPLAST K 2013

    septembre 18, 2013

    Addiplast will be present and exhibitor during the International German fair K 2013 in Hall 5 - Booth D04-14 in Düsseldorf from 16th to 23rd october (Germany).

    Addiplast Research Center team invites you to discover our new biobased renewable reinforced natural fiber compound ADDIBIO RENEW and our new thermoplastic compound range halogen free flame retardant ADDIFLAM, ESD & EMI Compound ADDITEC.

    We look forward to welcome you on our Booth 5-D04-14 during the fair K 2013 in Düsseldorf !

    SAVE THE DATE ADDIPLAST K 2013
    Contact the Supplier

    BIO SOURCED RANGE "ADDIBIO" TO DISCOVER ON K 2013

    juillet 15, 2013

    Addiplast will be present and exhibitor during the International German fair K 2013 in Hall 5 - Booth D04-14 in Düsseldorf from 16th to 23rd october (Germany).

    ADDIBIO RENEW ® Innovative in renewable polymers reinforced with natural fibers.

    This range is technical bio sourced products with sustainable chemical properties(loose of weight from 10 to 50%).

    3 plastics material bases : PP, PA, PC are developped for injection and extrusion applications.

    It permits to answer at every needs :

    Ø aesthetic and quality for interior appliances.

    Ø termical and mechanical for "structural" appliances,

    Ø appliances fields : luxury packaging , automotive, electrotechnic, food

    www.addiplast.com

    BIO SOURCED RANGE 'ADDIBIO' TO DISCOVER ON K 2013
    Contact the Supplier

    ADDIPLAST WISH YOU ALL THE BEST FOR 2013

    janvier 11, 2013

    We wish you and your family

    Much Happiness and Optimism at the turn of the year, and good fortune and success in the new year

    ADDIPLAST WISH YOU ALL THE BEST FOR 2013
    Contact the Supplier

    ADDIPLAST ON FAKUMA

    septembre 28, 2012

    Addiplast will be present and exhibitor in the Hall A4, booth 4125 during the International German fair FAKUMA  2012 in Friedrichshafen from 16th to 20th october;

    Addiplast Research Center team invites you in Hall A4-booth 4125  to discover our new ranges ADDIBIO RENEW : biobased renewable reinforced natural fiber compounds, ADDIFLAM : thermoplastic halogen free flame retardant compounds, as well as ADDITEC: ESD & EMI Compounds.

    We look forward to welcome you  in Hall A4, on our booth 4125 during the fair FAKUMA  2012 !

    You are chemist, plastic engineer, designer, research engineer or project manager ?

    A real structure of competence and expertise, the Addiplast Research Center is at your disposal.

    Our team of chemical & technical engineers, and colourist are ready to accompany you in the various stages of your projects, from the research to the industrialisation of materials corresponding to your areas of interest.
    The research centre is dedicated to innovation, to quality and research of new technical-economical solutions.

    ADDIPLAST ON FAKUMA
    Contact the Supplier

    Buyers

    Find your suppliers Complete your request and let our teams find you the best deals available.

    Suppliers

    Find your future clients List your products and services to enhance your web presence and receive qualified enquiries.