• Suggested offers
  • 0 results. Did you mean ?
  • Suggested categories
  • 0 results. Did you mean ?
  • Suggested companies
  • 0 results. Did you mean ?
  • Suggested offers
  • 0 results. Did you mean ?
  • Suggested categories
  • 0 results. Did you mean ?
  • Suggested companies
  • 0 results. Did you mean ?
Become exhibitor
Help
My account

The news of OMICRON ELECTRONICS FRANCE

IEDScout 5.00 - versatile software tool for working with IEC 61850 devices

April 22, 2020

Other measuring softwares
IEDScout is the ideal tool for protection and substation automation engineers working with IEC 61850 devices. The software allows access to IEDs (Intelligent Electronic Devices) and a detailed insight into the devices, making all data and communication information available. The simulation of IEDs as well as the monitoring of GOOSE messages in the activity monitor are only two of many helpful functions the software offers for working with IEDs.
 
The latest version of IEDScout 5.00 now also supports the mobile test set MBX1 and the permanently installable platform RBX1. Additional advantages result from the execution of the software on these cyber-secure test sets:
 
  • Highly secure and powerful platform
  • Isolation of Windows PCs from the substation network
  • The test device related license allows the use in a team
  • Simulation of several IEDs with their real IP addresses possible
 
When testing IEDs, ensure cyber-secure separation between your test PC and the system and use IEDScout 5.00 on your MBX1 or RBX1.
 
Further information about IEDScout 5.00 and its improvements can be found on the product page [https://www.omicronenergy.com/en/news/details/iedscout-500-available/]
IEDScout 5.00 - versatile software tool for working with IEC 61850 devices
Contact the Supplier

New method for timing tests on GIS with grounding on both sides

November 17, 2017

Tests
OMICRON’s circuit breaker test system CIBANO 500 now offers the new Current Sensor Measurement (CSM) method. This allows the operating times of the circuit breaker to be de-termined accurately despite the fact that the GIS is grounded on both sides.

During a close or open operation of the circuit breaker, the current sensor measures the cur-rent change through the ground connection or the circuit breaker and sends its signals to CIBANO 500 which determines the switch response times.

Since the new current sensor has a flexible design and can be easily installed on a multitude of different grounding switches, it is ideal for on-site applications in GIS installations.

As part of the test results, a GIS operator receives a condition assessment of the circuit breakers’ interrupter units and operating mechanisms and can avoid circuit breaker damage and outage of the GIS.

The new CSM method offers an increased level of safety for the tester, as it can be per-formed with both sides of the circuit breaker grounded.

CIBANO 500 combines a precise micro-ohmmeter, a multi-channel timing analyzer, and a powerful coil and motor supply in a single device. It can perform all common electrical tests, such as static and dynamic contact resistance tests, timing tests or analysis of coil and motor current, minimum pick-up tests or undervoltage tests using the same wiring. All tests can be performed either with power supplied by the station battery or the test device.

The lightweight test system (20 kg / 44.1 lbs) supports all types of circuit breakers: medium- and high-voltage circuit breakers with live- and dead-tank design and in GIS installations.

OMICRON is an international company serving the electrical power industry with innovative testing and diagnostic solutions. The application of OMICRON products allows users to assess the condition of the primary and secondary equipment on their systems with complete confidence. Services offered in the area of consulting, commissioning, testing, diagnosis and training make the product range complete.

Customers in more than 150 countries rely on the company’s ability to supply leading edge technology of excellent quality. Service centers on all continents provide a broad base of knowledge and extraordinary customer support. All of this together with our strong network of sales partners is what has made our company a market leader in the electrical power industry.
New method for timing tests on GIS with grounding on both sides
Contact the Supplier

Light, ultra-portable, precise – CMC 430 : A new addition to the CMC product family from OMICRON

November 17, 2017

Calibrators
Weighing a mere 8.7 kg, the CMC 430 is the lightest and most precise protection test set in the world. Thanks to its robust design – including edge protection – it is ideally suited to porta-ble applications, even when subjected to harsh ambient conditions and extreme temperature fluctuations.

Extensive test functions right through to hybrid measurements

The CMC 430's technical merits really come to the fore when testing numerical and commu-nication-based relay systems and measuring systems, especially during tests with up to three currents of 12.5 A at the same time. Here its outstanding performance as a relay test set is combined with functions for hybrid measurements and recordings (analog, binary, GOOSE, and Sampled Values in accordance with IEC 61850). The EnerLyzer Live software option enables hybrid measurements and recordings to be taken simultaneously with active output channels.

Unique: Six voltage outputs for a broader range of test applications

The six voltage outputs allow the synchro-check function to be tested, as well as bay control systems with six voltage inputs – without an additional voltage amplifier. Red LEDs indicate the status of the voltage and current amplifier (continuous light for active output and flashing light for output overload). They are accompanied by an acoustic signal that can be switched off.

Performance and maximum accuracy in the test set sector

The three powerful 100 W current amplifier enable burden measurements to be taken and older protective device models to be tested. Thanks to its extremely high amplitude and phase accuracy (current and voltage), the CMC 430 is an ideal source for calibrating meas-uring instruments, such as energy meters, measuring transducers, PQ measuring instru-ments, and PMUs.

High-performance testing tools support an array of different testing tasks

The device can be controlled using either a Windows laptop or an Android tablet PC, on which the high-performance software testing tools from OMICRON come into play: Test Universe, CMContol App, or RelaySimTest.

Maximum mobility for the testing engineer

OMICRON offers two options for transporting the CMC 430. The trolley with rucksack function is the highly portable choice if the device needs to be transported easily in harsh conditions. There is also plenty of room for the required accessories in addition to the device. The highly resilient multi-function transport case has proved a particular hit for OMICRON. As well as a pull-out handle and wheels, it provides the familiar secure protection for the device
and accessories against dust, dripping water, and mechanical influences, making it suitable for unsupervised transport or shipping. What is more, the robust lid can be raised to use as a work table for the control laptop, while the CMC 430 device remains inside the case.

Certified safety

The device is certified by TÜV SÜD AMERICA Inc. and meets European, North American, and international health and safety requirements.

Company profile

OMICRON is an international company providing the electrical power industry with innovative testing and diagnostic solutions. The application of OMICRON products gives users the highest level of confi-dence when making condition assessments of primary and secondary equipment on their systems. Services offered in the area of consulting, commissioning, testing, diagnosis, and training make the product range complete.

Customers in more than 140 countries rely on the company’s ability to supply leading edge technology of excellent quality. Service centers on all continents provide a broad base of knowledge and extraordinary customer support. All of this together with our strong network of sales partners is what has made our company a market leader in the electrical power industry.
Light, ultra-portable, precise – CMC 430 : A new addition to the CMC product family from OMICRON
Contact the Supplier

COMPANO 100 : Primary injection, secondary injection and basic protection test set

November 17, 2017

Tests
COMPANO 100 is the universal and easy-to-use solution for all types of basic testing duties in electrical energy systems. Controlled electronic sources allow the user to obtain exactly the desired value and to output signals with variable frequencies and other signal forms, auto-mated ramps, and pure DC. The highly flexible inputs are configurable, for example, as binary inputs for relay testing, AC or DC voltage inputs or current inputs. Due to its light weight (only 10 kg / 22 lbs), small size and unique battery operation, COMPANO 100 can be moved around easily and used for commissioning, maintenance and troubleshooting in utilities, industry plants, and by service providers. A large variety of testing tasks can be conveniently and easily solved using this device: e.g. wiring and polarity checks, burden measurements, single-phase protection relay testing, CT/VT ratio checks, and micro-ohm resistance testing.

In utilities, literally hundreds of connections have to be verified during commissioning and re-commissioning. Especially in high voltage environments CTs and VTs are often far away from the relay and control room. Thanks to the battery-operated and light-weight COMPANO 100 users can perform convenient wiring and polarity checks, even without mains supply. As COM-PANO 100 can also inject current from the primary side to the CT and an independent voltage signal to the VT/PT path, it is possible to detect all potential wiring errors, missing grounds, unwanted additional grounds, swapped wiring and even the CT direction setting in the relay.

In industry plants an easy-to-use and portable test set with outstanding capabilities is indispen-sable. With COMPANO 100 users can generate high currents and variable voltages for testing, easily test overcurrent protection relays and ductors.

Service providers benefit from the high versatility of COMPANO 100. Wiring checks by primary or secondary injection, basic relay tests, continuity checks with high currents or even MCB tests are possible with a single device.

Company profile

OMICRON is an international company serving the electrical power industry with innovative testing and diagnostic solutions. The application of OMICRON products allows users to assess the condition of the primary and secondary equipment on their systems with complete confidence. Services offered in the area of consulting, commissioning, testing, diagnosis and training make the product range complete.

Customers in more than 140 countries rely on the company’s ability to supply leading edge technology of excellent quality. Service centers on all continents provide a broad base of knowledge and extraordinary customer support. All of this together with our strong network of sales partners is what has made our company a market leader in the electrical power industry.
COMPANO 100 : Primary injection, secondary injection and basic protection test set
Contact the Supplier
Find your suppliers Complete your request and let our teams find you the best deals available.
Find your future clients List your products and services to enhance your web presence and receive qualified enquiries.