RACO’s spring energy loaded brake systems account for a maximum security. These units are working simply as an electro mechanical device and, therefore, are particularly suitable for the use in light rail vehicles. The brake operation is absolutely smooth without any jerking.
Environmental conditions such as freezing or ice up of the brake system can not occur based on the electro mechanical design. Spring energy loaded brake systems from RACO are used for final deceleration, parking, emergency and as auxiliary or secondary safety brakes. The inherent fail safe design will activate the brake and stop the vehicle even if the electrical power supply fails.
Spring energy loaded brake systems are based on the principle of the RACO electro-actuator ®. A set of springs is kept energized via a thrust rod. As soon as the power circuit is interrupted the stored energy of the spring package is gradually released to build up braking forces at the brake pads. Spring energy loaded brake systems from RACO – for safety on the track.
Electro mechanical spring energy loaded braking systems are superior to pneumatically or hydraulically operated brake systems in many aspects.
The advantages in the overview
Easy installation
Smooth braking operation without jerking
Low operating and maintenance cost
No icing up or freezing at low temperatures
No problems caused by leaky pipes
No annoyance caused by noise emission
Particularly environmentally friendly as no media needed to be disposed of
All you need to run your factory !
