Positioners and Tightening components

Compare the offers and products in the category Positioners and Tightening components. Either from this list or from a product page you may request documentation or a free quote of the seller.

Receive documentation

Refine by

Brands +

Camloc

Type of product +

New (22)

Linked categories +

Star categories

Products (240)

Products from 1 to 80 of 240

Page 1 / 3

Rotary Hubb Ø 30mm to suit TIROMAT

PRO'COUPE Industries

Rotary Hubb Ø 30mm to suit TIROMAT

PRO'COUPE Industries

• Rotary hub and circular knife • To suit : TIROMAT • Reference : 0150000002

Find out more

Receive more info

Rotary Hubb Ø 20mm to suit TIROMAT

PRO'COUPE Industries

Rotary Hubb Ø 20mm to suit TIROMAT

PRO'COUPE Industries

• To suit : TIROMAT • Reference : 0150000001

Find out more

Receive more info

Direct Drive PSD 49

halstrup-walcher GmbH

Direct Drive PSD 49

halstrup-walcher GmbH

PSD 49 direct drive is a mechatronic system with integrated control, bus interface and absolute measurement system without battery. This drive is […]

Find out more

Receive more info

Direct Drive PSD 48

halstrup-walcher GmbH

Direct Drive PSD 48

halstrup-walcher GmbH

PSD 48 direct drive is a mechatronic system with integrated control, bus interface and absolute measurement system without battery. This drive is […]

Find out more

Receive more info

Direct Drive PSD 43

halstrup-walcher GmbH

Direct Drive PSD 43

halstrup-walcher GmbH

PSD 43 direct drive is a mechatronic system with integrated control, bus interface and absolute measurement system without battery. This drive is […]

Find out more

Receive more info

Direct Drive PSD 42

halstrup-walcher GmbH

Direct Drive PSD 42

halstrup-walcher GmbH

PSD 42 direct drive is a mechatronic system with integrated control, bus interface and absolute measurement system without battery. This drive is […]

Find out more

Receive more info

Direct Drive PSD 41

halstrup-walcher GmbH

Direct Drive PSD 41

halstrup-walcher GmbH

PSD 41 direct drive is a mechatronic system with integrated control, bus interface and absolute measurement system without battery. This drive is […]

Find out more

Receive more info

Direct Drive PSD 40

halstrup-walcher GmbH

Direct Drive PSD 40

halstrup-walcher GmbH

PSD 40 direct drive is a mechatronic system with integrated control, bus interface and absolute measurement system without battery. This drive is […]

Find out more

Receive more info

Positioning drive HIPERDRIVE HDA 70

halstrup-walcher GmbH

Positioning drive HIPERDRIVE HDA 70

halstrup-walcher GmbH

The HIPERDRIVE HDA 70 positioning drive allows adjustment procedures for positioning and auxiliary axes to be performed efficiently, at low cost and […]

Find out more

Receive more info

Positioning drive PSE 30x-8

halstrup-walcher GmbH

Positioning drive PSE 30x-8

halstrup-walcher GmbH

The PSE 30x-8 positioning systems are intelligent, compact solutions for the automatic adjustment of auxiliary and positioning axes comprising an […]

Find out more

Receive more info

Positioning drive PSW 31x-8

halstrup-walcher GmbH

Positioning drive PSW 31x-8

halstrup-walcher GmbH

Positioning system with protection class IP 68 for wet area applications The PSW 31x-8 positioning systems are intelligent, compact solutions for the […]

Find out more

Receive more info

Positioning drive PSW 31x/33x-14

halstrup-walcher GmbH

Positioning drive PSW 31x/33x-14

halstrup-walcher GmbH

Positioning system with protection class IP 68 for hygienic applications The PSW 31x/33x-14 positioning systems are intelligent, compact solutions for […]

Find out more

Receive more info

Positioning drive PSW 30x/32x-14

halstrup-walcher GmbH

Positioning drive PSW 30x/32x-14

halstrup-walcher GmbH

Positioning system with protection class IP 68 for damp area applications for wet area applications The PSW 30x/32x-14 positioning systems are […]

Find out more

Receive more info

Positioning drive PSW 30x-8

halstrup-walcher GmbH

Positioning drive PSW 30x-8

halstrup-walcher GmbH

Positioning system with protection class IP 68 for wet area applications in hygienic design The PSW 30x-8 positioning systems are intelligent, compact […]

Find out more

Receive more info

Positioning drive PSS 31x/33x-14

halstrup-walcher GmbH

Positioning drive PSS 31x/33x-14

halstrup-walcher GmbH

Positioning system with protection class IP 65 for hygienic applications The PSS 31x/33x-14 positioning systems are intelligent, compact solutions for […]

Find out more

Receive more info

Positioning drive PSS 31x-8

halstrup-walcher GmbH

Positioning drive PSS 31x-8

halstrup-walcher GmbH

Positioning system with protection class IP 65 for damp area applications The PSS 31x-8 positioning systems are intelligent, compact solutions for the […]

Find out more

Receive more info

Positioning drive PSS 30x/32x-14

halstrup-walcher GmbH

Positioning drive PSS 30x/32x-14

halstrup-walcher GmbH

Positioning system with protection class IP 65 for damp area applications The PSS 30x/32x-14 positioning systems are intelligent, compact solutions […]

Find out more

Receive more info

Positioning drive PSS 30x-8

halstrup-walcher GmbH

Positioning drive PSS 30x-8

halstrup-walcher GmbH

Positioning system with protection class IP 65 for damp area applications The PSS 30x-8 positioning systems are intelligent, compact solutions for the […]

Find out more

Receive more info

Positioning drive PSE 34x-14

halstrup-walcher GmbH

Positioning drive PSE 34x-14

halstrup-walcher GmbH

The PSE 34x-14 positioning systems are intelligent, compact solutions for the automatic adjustment of auxiliary and positioning axes comprising an […]

Find out more

Receive more info

Positioning drive PSE 30x/32x-14

halstrup-walcher GmbH

Positioning drive PSE 30x/32x-14

halstrup-walcher GmbH

The PSE 30x/32x-14 positioning systems are intelligent, compact solutions for the automatic adjustment of auxiliary and positioning axes comprising an […]

Find out more

Receive more info

Positioning drive PSE 31x-8

halstrup-walcher GmbH

Positioning drive PSE 31x-8

halstrup-walcher GmbH

The PSE 31x-8 positioning systems are intelligent, compact solutions for the automatic adjustment of auxiliary and positioning axes comprising an […]

Find out more

Receive more info

Positioning drive PSE 31x/33x-14

halstrup-walcher GmbH

Positioning drive PSE 31x/33x-14

halstrup-walcher GmbH

The PSE 31x/33x-14 positioning systems are intelligent, compact solutions for the automatic adjustment of auxiliary and positioning axes comprising an […]

Find out more

Receive more info

Positioning drive PSE 272

halstrup-walcher GmbH

Positioning drive PSE 272

halstrup-walcher GmbH

The PSE 272 positioning system is a complete system consisting of an actuator and a closed loop with a torque of up to 5 Nm. The target value is […]

Find out more

Receive more info

Positioning drive PSE 200

halstrup-walcher GmbH

Positioning drive PSE 200

halstrup-walcher GmbH

The PSE 200 positioning system is a complete system consisting of an actuator and a closed loop with a torque of up to 10 Nm. The target value is […]

Find out more

Receive more info

Positioning drive PSE 21x/23x-8

halstrup-walcher GmbH

Positioning drive PSE 21x/23x-8

halstrup-walcher GmbH

The PSE 21x/23x-8 positioning systems are compact solutions with integrated intelligence that frees up the machine´s central control unit. The […]

Find out more

Receive more info

FSS clamping systems

ROEMHELD

FSS clamping systems

ROEMHELD

The core elements of a FSS clamping system are the clamping and support elements that can be used in unlimited quantity and that together form the […]

Find out more

Receive more info

Workpiece power workholding | Machine vices

ROEMHELD

Workpiece power workholding | Machine vices

ROEMHELD

Mechanical, mechanical-hydraulic and hydraulic workpiece clamping systems and standard fixtures for machine tools, machining centres and flexible […]

Find out more

Receive more info

Built-in Pistons single acting, with spring return max. operating pressure 250 bar WZ 4.1070

ROEMHELD

Built-in Pistons single acting, with spring return max. operating pressure 250 bar WZ 4.1070

ROEMHELD

Application Built-in pistons are used in bars and blocks for clamping and locking of workpieces and dies. The built-in pistons are particularly […]

Find out more

Receive more info

Angular Clamp, hydraulic single acting, with spring return WZ 3.2206

ROEMHELD

Angular Clamp, hydraulic single acting, with spring return WZ 3.2206

ROEMHELD

Application Angular clamps are used for clamping and locking on machines and plants, on press bed and ram. Due to the manageable and rounded design, […]

Find out more

Receive more info

Sliding Clamp compact single acting with spring return - WZ 3.2202

ROEMHELD

Sliding Clamp compact single acting with spring return - WZ 3.2202

ROEMHELD

Application The "compact" sliding clamp is a hydraulic clamping element, used with minimum space requirements for clamping and locking on […]

Find out more

Receive more info

Extending Clamps WZ 2.2480

ROEMHELD

Extending Clamps WZ 2.2480

ROEMHELD

Application • Preferably on press beds • For clamping and locking dies and moving bolsters in presses Advantages ● Compact housing and high […]

Find out more

Receive more info

Down-Thrust Clampsmoveable, size 40 - EH 23310

HALDER FRANCE SAS

Down-Thrust Clampsmoveable, size 40 - EH 23310

HALDER FRANCE SAS

The moveable downthrust clamps are used, amongst other things, when swivel movements are not possible because of the workpiece. The clamps provide the […]

Find out more

Receive more info

Quick-Change Mounting Plate M 8.302

ROEMHELD

Quick-Change Mounting Plate M 8.302

ROEMHELD

Application The quick-change mounting plate can be mounted onto all modulog modules and devices with interface 140 x 140 mm. The built-in STARK zero […]

Find out more

Receive more info

SPEEDY classic - hydraulic, mechanical

ROEMHELD

SPEEDY classic - hydraulic, mechanical

ROEMHELD

the extensive and multi-purpose hydraulic/mechanical zero point mounting system in 4 sizes from 5.3 to 30 kN

Find out more

Receive more info

SPEEDY hydratec - hydraulic, double acting

ROEMHELD

SPEEDY hydratec - hydraulic, double acting

ROEMHELD

the hydraulic double-acting zero point mounting system is of universal use due to its compact design and the adjustable retention force up to 20 kN at […]

Find out more

Receive more info

SPEEDY metec - mechanical

ROEMHELD

SPEEDY metec - mechanical

ROEMHELD

the solid mechanical zero-point mounting system, that facilitates simple and low-cost solutions in 2 sizes from 12 to 20 kN

Find out more

Receive more info

SPEEDY airtec - pneumatic

ROEMHELD

SPEEDY airtec - pneumatic

ROEMHELD

the zero point mounting system with pneumatic operation in modular design, with centre locking and indexing generates a retention force of 20 kN at an […]

Find out more

Receive more info

Threaded-Body Universal Cylinder B1.309

ROEMHELD

Threaded-Body Universal Cylinder B1.309

ROEMHELD

Description The threaded-body universal cylinders are delivered with the same piston diameters and strokes as the well-proven block cylinders. […]

Find out more

Receive more info

Universal Clamping Cylinder B1.310

ROEMHELD

Universal Clamping Cylinder B1.310

ROEMHELD

Description Universal clamping cylinders are particularly suited for clamping fixtures designed to hold various sizes of workpieces (parts families). […]

Find out more

Receive more info

Threaded-Body Cylinder B 1.4301

ROEMHELD

Threaded-Body Cylinder B 1.4301

ROEMHELD

Description These clamping cylinders may be threaded directly into tapped holes of the fixture. These compact devices can be used to great advantage […]

Find out more

Receive more info

Swivel and Pull Clamps - WZ 2.1833

ROEMHELD

Swivel and Pull Clamps - WZ 2.1833

ROEMHELD

Application Swivel and pull clamps are used on presses and high-speed punching presses. Thanks to the compact design, they are particularly suitable […]

Find out more

Receive more info

Pivot and Pull Clamps WZ 2.2185

ROEMHELD

Pivot and Pull Clamps WZ 2.2185

ROEMHELD

Description A control mechanism translates the stroke of the double-acting piston into a tilting and lifting movement of the tie rod. For releasing […]

Find out more

Receive more info

Wedge Clamps for Straight Clamping Edge - WZ 2.2451

ROEMHELD

Wedge Clamps for Straight Clamping Edge - WZ 2.2451

ROEMHELD

Application Double-acting wedge clamps are particularly suitable for safe clamping of dies with straight clamping edge on a press bed or ram or for […]

Find out more

Receive more info

Wedge Clamps for Straight Clamping Edge WZ 2.2460

ROEMHELD

Wedge Clamps for Straight Clamping Edge WZ 2.2460

ROEMHELD

Application Double-acting wedge clamps are particularly suitable for safe clamping of dies with straight clamping edge on a press bed or ram or for […]

Find out more

Receive more info

Flexline Rapid Clamping Systems with Drive Chain - WZ 3.2280

ROEMHELD

Flexline Rapid Clamping Systems with Drive Chain - WZ 3.2280

ROEMHELD

Application Rapid clamping systems are used for the automatic clamping of dies of varying sizes on the press ram. Description The electro-mechanical […]

Find out more

Receive more info

Swing Sink Clamps double acting, with 90° swing angle WZ 4.2150

ROEMHELD

Swing Sink Clamps double acting, with 90° swing angle WZ 4.2150

ROEMHELD

Application Swing sink clamps are installed in press rams or press beds, in machine tools and plants. Thanks to the compact design, they are […]

Find out more

Receive more info

Pull Clamps WZ 4.2180

ROEMHELD

Pull Clamps WZ 4.2180

ROEMHELD

Application Double-acting pull clamps for clamping dies on a press bed or press ram. Thanks to the compact design, they are particularly suitable for […]

Find out more

Receive more info

Wedge Clamps Electro-Mechanical self-locking WZ 5.2670

ROEMHELD

Wedge Clamps Electro-Mechanical self-locking WZ 5.2670

ROEMHELD

Application Electro-mechanical wedge clamps are used for hydraulic free clamping of dies on sliding tables, in injection moulding machines and presses […]

Find out more

Receive more info

Angular Clamps WZ 5.2610

ROEMHELD

Angular Clamps WZ 5.2610

ROEMHELD

Application Automatic clamping of dies • on the press ram • on blank holders • at environmental temperatures up to max. 70 °C […]

Find out more

Receive more info

Base Plates EH 1000.400 - EH 1000.500

HALDER FRANCE SAS

Base Plates EH 1000.400 - EH 1000.500

HALDER FRANCE SAS

Material Steel, hardened, ground Notes Special types on request

Find out more

Receive more info

Clamping Cubes - EH 1508.200 - EH 1608.600

HALDER FRANCE SAS

Clamping Cubes - EH 1508.200 - EH 1608.600

HALDER FRANCE SAS

Material Grey cast iron GG Notes Special types on request.

Find out more

Receive more info

C-Washers DIN 6372 - EH 22290

HALDER FRANCE SAS

C-Washers DIN 6372 - EH 22290

HALDER FRANCE SAS

Material Heat-treated steel, tempered, blackened

Find out more

Receive more info

Mounting Blocks EH 1010.100 - EH 1110.100

HALDER FRANCE SAS

Mounting Blocks EH 1010.100 - EH 1110.100

HALDER FRANCE SAS

Material Steel, case-hardened, ground

Find out more

Receive more info

Consoles - EH 1510.100 - EH 1610.100

HALDER FRANCE SAS

Consoles - EH 1510.100 - EH 1610.100

HALDER FRANCE SAS

Material Grey cast iron, phosphatized

Find out more

Receive more info

Seating Pinspin shape - EH 22680

HALDER FRANCE SAS

Seating Pinspin shape - EH 22680

HALDER FRANCE SAS

To be used as solid and precise seat and stop. The pin-shaped form of this locating pin allows an application in components with narrow seating […]

Find out more

Receive more info

Ball-Ended Thrust Screws headless, ball protected against rotating - EH 22700

HALDER FRANCE SAS

Ball-Ended Thrust Screws headless, ball protected against rotating - EH 22700

HALDER FRANCE SAS

For clamping and supporting of surfaces that are not exactly parallel. Maximised load transmission due to moveable ball. Material Ball Ball-bearing […]

Find out more

Receive more info

22730.0318Self-Aligning Pads - EH 22730.

HALDER FRANCE SAS

22730.0318Self-Aligning Pads - EH 22730.

HALDER FRANCE SAS

Self-aligning pads are used as stop, support and thrust pad and are suitable for installation in clamping elements. Material Ball Ball-bearing steel, […]

Find out more

Receive more info

Centering Pins - EH 23110

HALDER FRANCE SAS

Centering Pins - EH 23110

HALDER FRANCE SAS

The centering pins are used for centering fixtures on pallets. Material Alloyed case-hardened steel, case hardened, ground

Find out more

Receive more info

Centering Pins stepped EH 23110

HALDER FRANCE SAS

Centering Pins stepped EH 23110

HALDER FRANCE SAS

The stepped centering pins are used for centering fixtures on pallets. Material Alloyed case-hardened steel, case hardened, ground

Find out more

Receive more info

Loose Slot Tenons DIN 6323 - EH 23120.

HALDER FRANCE SAS

Loose Slot Tenons DIN 6323 - EH 23120.

HALDER FRANCE SAS

To be used for locating fixtures and clamping elements onto machine tables with T-slots to DIN 650. Being simply pushed into position after fixture or […]

Find out more

Receive more info

Multi-Vices MS 125 - EH 1700

HALDER FRANCE SAS

Multi-Vices MS 125 - EH 1700

HALDER FRANCE SAS

Scope of application: Can be applied horizontally and vertically - therefore suitable for vertical and horizontal CNC milling machines Conventional […]

Find out more

Receive more info

Floating Clamps combined clamping and locking M 12 - EH 23320

HALDER FRANCE SAS

Floating Clamps combined clamping and locking M 12 - EH 23320

HALDER FRANCE SAS

The floating clamp is used to clamp and support additional clamping points on components. The benefits of the floating clamp are: Avoids vibration […]

Find out more

Receive more info

Supporting Elements - EH 23220

HALDER FRANCE SAS

Supporting Elements - EH 23220

HALDER FRANCE SAS

The support element is used to support overdetermined clamping points on components. The benefits of the support element are: Support for unstable […]

Find out more

Receive more info

Floating Clamps separate clamping and locking M 12 - EH 23320

HALDER FRANCE SAS

Floating Clamps separate clamping and locking M 12 - EH 23320

HALDER FRANCE SAS

Floating clamps with separate clamping and locking are used to clamp and support additional clamping points on extremly pliable workpieces. Both, […]

Find out more

Receive more info

Compact Clamps - EH 23690

HALDER FRANCE SAS

Compact Clamps - EH 23690

HALDER FRANCE SAS

The compact clamps are all purpose clamping elements. Due to the self-locking clamping lever application can either take place in horizontal or […]

Find out more

Receive more info

HSK Type C

OTT-JAKOB SPANNTECHNIK GMBH

HSK Type C

OTT-JAKOB SPANNTECHNIK GMBH

Type C HSK generates extremely short tool-changing times. The built-in holding function minimises waiting time during the tool-changing process. Our […]

Find out more

Receive more info

HSK Type K

OTT-JAKOB SPANNTECHNIK GMBH

HSK Type K

OTT-JAKOB SPANNTECHNIK GMBH

Type K HSK is the most cost-efficient solution in the range of OTT-JAKOB HSK-Clamping-Units. A solid basic variant, it is particularly suited for […]

Find out more

Receive more info

ACS manual clamping unit

OTT-JAKOB SPANNTECHNIK GMBH

ACS manual clamping unit

OTT-JAKOB SPANNTECHNIK GMBH

ACS MANUAL CLAMPING UNIT The ACS axial clamp from OTT-JAKOB was developed for use in rotating processes. It actuates on an axis which makes ACS the […]

Find out more

Receive more info

QCF mounting group

OTT-JAKOB SPANNTECHNIK GMBH

QCF mounting group

OTT-JAKOB SPANNTECHNIK GMBH

The QCF mounting group comprises the QCS clamping unit and a universal flange that is compatible with all conventional HSK standards. QCF is designed […]

Find out more

Receive more info

QCG mounting group

OTT-JAKOB SPANNTECHNIK GMBH

QCG mounting group

OTT-JAKOB SPANNTECHNIK GMBH

The QCG mounting group consists of the QCS clamping unit and a flange for common HSK sizes. The challenging HSK inside contour is already present.

Find out more

Receive more info

HSK Typ BK

OTT-JAKOB SPANNTECHNIK GMBH

HSK Typ BK

OTT-JAKOB SPANNTECHNIK GMBH

For the shortest possible spindle lengths, shorter variants of many Type B clamping units are also available.

Find out more

Receive more info

HSK Type D

OTT-JAKOB SPANNTECHNIK GMBH

HSK Type D

OTT-JAKOB SPANNTECHNIK GMBH

Based on Type B, this clamping unit provides an even higher transmission ratio with an identical internal contour.

Find out more

Receive more info

Oil free bushings MISUMI

MISUMI

Oil free bushings MISUMI

MISUMI

MISUMI offers a wide range of oil free bushings and bushings with housing. Our customers can select out of several materials and flange and housing […]

Find out more

Receive more info

Clamping rail

GRESSEL

Clamping rail

GRESSEL

The clamping rail is the “fundamental body shape“ of the system, with two widths, each with three lengths, including a fixed jaw, making […]

Find out more

Receive more info

Cardan shaft brackets

PRUFTECHNIK

Cardan shaft brackets

PRUFTECHNIK

Universal mounting for cardan shaft brackets. Two bracket sets available according to the shaft rotation degree. • Quick measurement set-up. No […]

Find out more

Receive more info

Compact magnetic brackets

PRUFTECHNIK

Compact magnetic brackets

PRUFTECHNIK

Instant mounting on any ferromagnetic surface: just place the compact magnetic brackets onto coupling flanges or shaft faces and you're all set! Four […]

Find out more

Receive more info

Shaft alignment brackets for tight spaces

PRUFTECHNIK

Shaft alignment brackets for tight spaces

PRUFTECHNIK

Only 8 mm (5/16") thick, this bracket offers an ideal solution to those occasional tight squeezes between coupling and machine housing. The case […]

Find out more

Receive more info

Magnetic sliding bracket

PRUFTECHNIK

Magnetic sliding bracket

PRUFTECHNIK

This bracket allows measurement for shaft alignment when one or both shafts cannot be rotated. Place the magnetic sliding bracket upon the back of the […]

Find out more

Receive more info

HSK Type B

OTT-JAKOB SPANNTECHNIK GMBH

HSK Type B

OTT-JAKOB SPANNTECHNIK GMBH

Type B was developed to meet the specific requirements of the automotive industry. This high-performance clamping unit was designed for frequent, […]

Find out more

Receive more info

KM4X

OTT-JAKOB SPANNTECHNIK GMBH

KM4X

OTT-JAKOB SPANNTECHNIK GMBH

The high-performance KM4X interface was developed to meet the specific requirements of working with hard-to-machine materials such as titanium alloys. […]

Find out more

Receive more info

Suppliers (35) Catalogues (8)

1 2 3 Next

Users who saw this also viewed

Other hydraulic pumps Linear actuator Roller linear guidance Compression spring Double effect pneumatic cylinder Threaded pneumatic fitting Membrane valves Hydraulic presses Lubrication Vacuum pump Agitators Other compressed air filters Adsorption dryer Compressed air purger Rotary screw compressors

Latest requests

30/12/2023 -

Devis pour un aimant pour alignement arbre fixe.
24/12/2023 -

I need sliding bracket, kit, ALI 2.220 and 2.230 (1pc/each
13/10/2023 -

is that same with FLUKE ALI 2.230-1 BRACKET MAGNETIC SLIDING SET? Qty : 2 set
28/09/2023 -

I need 1 set of Universal magnetic sliding bracket AL12220 And AL12230
28/03/2023 -

Demande de devis pour aimant pour alignement arbre fixe
16/02/2023 -

Demande de devis pour aimant pour alignement arbre fixe
09/02/2023 -

Can you please tell me if 14x are available (I understand if not available currently, lead time is approximately 30 weeks):PSE32x-14 where x=>5.
24/01/2023 -

SLIDING BRACKET ALI 2.220 ; SLIDING BRACKET ALI2.230
03/10/2022 -

I need 2 of these brackets shipped to Redford, Michigan.
16/08/2022 -

Demande de devis pour aimant pour alignement arbre fixe
All requests for Positioners and Tightening components