Signal light CO₂

The purpose of the CO₂ Signal Light is to measure the level of CO₂ in the ambient air. 
 
Highly effective in minimizing the risk of COVID-19 transmission, the use of the CO₂ traffic light is highly recommended in enclosed spaces.
 
Through infrared technology, this traffic light kit alerts you if the level of CO₂ in the room you are in becomes significant.
 
This way, you will know when ventilation is needed, so necessary in this time of pandemic.
 
Offices, classrooms, conference rooms, stores, medical offices, restaurants, etc., are some examples of application of this traffic light kit (green/orange, red) with CO₂ determination.
 
Very intuitive and easy to understand, the traffic light is offered with a light column with CO₂ determination, with mounting material and a power supply unit for 230 V.
 
Authorized for a temperature range of -20 to +50 °C, this CO₂ signal light for monitoring air quality in confined spaces is manufactured with an aluminum alloy housing.
 
Very practical with its small dimensions (80 x, 80 x, 22 mm) and light weight (150 g), the CO₂ signal light should ideally be placed in the center of the room, less than 2 m from the floor.
 
When the green light is on, no ventilation is required. Once the red light is on, ventilation becomes necessary until it turns green again. Similarly, the yellow light requires a renewal of the ambient air.
 
Opting for this BE ATEX product means taking advantage of a recalibration of the devices, the control and verification of the I.P.E., as well as the configuration of the devices.
 
Only, in very large rooms such as an amphitheater or a sports hall, it is better to have two detectors. The rate of CO₂ in the air is expressed in three levels:
 
Green light: CO₂ level below 800 ppm. No need to ventilate the room.
Yellow light: CO₂ level between 800 and 2000 ppm. It is necessary to ventilate the room.
Red light: CO₂ level higher than 2000 ppm. It is necessary to ventilate the room or even to leave it if possible.