Watco Flowpatch - Concrete Hole Repair

Industrial floors

Vote

“ A pourable mortar for filling holes in concrete, inside and out Easy to use rapid dry formula Takes forklifts in just 2 hours Just add water, mix and pour Fibre reinforced for added strength ”

Ask for a quote

Presentation

Description
Flowpatch® is an easy to mix pourable material, ideal for quick repairs to level concrete, inside or outside. Its very strong formula will harden quickly and will accept heavy traffic including forklifts only 2 hours after application.

Features of Flowpatch

Just add water, mix and pour
Can be applied to damp (not wet) concrete
Sets at low temperatures (down to 5°C)
Can be applied from 10mm to 100mm
Light grey, slip resistant finish
Odourless, non-toxic, non-hazardous formula
Fibre reinforced

Technical features

Quick setting, pourable patch repair for heavily trafficked floors, just add water, mix and pour, slip resistant finish, sets at low temperatures. Suitable for: Concrete Interior and exterior No primer required Composition: Reinforced cement & polymer powder Coverage: Approximately 0.5m² at 25mm thick per 25kg Curing time: 1 hour at 15°C Minimum application temperature: 5°C

Download the complete technical features

Opinion on the product