Waterpump Residential Application M92-102-202 Electric Self Primingpump "Jet" (with external ejector for deep well Ø2")'

APPLICATIONS

Water supply to remote dwellings i.e. farmhouses, general water supply, pressurized water using pressure vessels (autoclaves), horticultural irrigation, mist irrigation, dairy, farm also industrial applications. Water transfer and garden watering applications.
Note, a foot-valve must be fitted to the ejector also with a valve mounted on the outlet of the pump to ensure a suitable counter pressure during operation.
The pipes connecting the ejector and the pump body must always be filled up before starting.

CHARACTERISTICS

Pump body, pump support and ejector in cast iron. Pressed Brass Impeller M92 - M102 models, on request thermoplastic resin on the M202 model. Diffuser in Thermoplastic resin. Mechanical seal in carbon ceramic. Rotor shaft in steel fitted with seal bearings. Totally enclosed fan cooled motor (TEFC). Single phase motors with a built in thermal overload protection on request, the capacitor is permanently in circuit.

• Motor protection to IP44 (available in IP55 upon Request).
• Winding Insulation to class F.
• Standard Voltage: 230V-50hz single phase 230V/400V-50Hz three phase.
• Other voltages and frequencies available upon request