For the machining of ALU profiles (curtain wall) and 3-plane skew cut with the possibility of machining a profile of 300 mm width in straight milling (at 90 °) and an angled profile up to 30.
Designed for use with carbide tipped saw bits Ø 500 mm (horizontal and vertical heads).
This machine is equipped with :
• 2 TRI 400 V motors, power 3.0 kW, speed of rotation 2800 rpm.
• Manual rotation of the vertical sawing cutter at + 60 ° / 90 ° / - 45 ° (positioning on mechanical screw).
• Manual positioning at + 45 ° / 90 ° / - 45 ° of the gondola that supports the vertical and horizontal milling cutter (positioning on mechanical screw).
• Oleopneumatic movement of the sawhead with adjustment of the feedrate.
• Return of the head in fast speed during machining, profile remaining fixed.
• Manual positioning of the milling height (reading on mechanical display).
• Depth stop adjustable by steering wheel (OPTION: adjustment by electric motor) and mechanical counter.
• Pneumatic vertical and horizontal clamping of the profile.
• Rear jaw swivels from left to right: + 30 ° / 90 ° / - 45 ° (angle reading on graduated sector).
• Straight lugs, 1 bias side, 2 sided sides, 3 sided sides possible.
• 2-hand control console.
• Front protective cover folds upwards.
• Lubrication of the blade by 2 spray nozzles.
NOTE: By removing the horizontal saw blade, this machine can also be used as a cut-off saw.
All you need to run your factory !
