The AKIMist ® “E”’s features:
-
Energy-saving humidifiers with pneumatic spray nozzles producing Dry Fog**.
-
With world-leading technology, our AKIMist® “E” produces ultra-fine “non-wetting” Dry Fog, which doesn’t wet the objects it touches.
-
Prevents dryness and static electricity, enabling higher manufactured product quality and lower defect rates.
-
The running cost is 1/5 of a comparable steam humidification system.
-
For spaying chemical solution, chemical-resistant AKIMist® “E” TN is available.
-
The spray capacity per one AKIMist® “E” varies by the nozzle type: AKIMist® “E” with nozzle type 03C: 2.4 - 9.6 L/hr ; AKIMist® “E” with nozzle type 04E: 3.0 – 12.0 L/hr
-
The Sauter mean droplet diameter of AKIMist® “E” varies by the nozzle type: AKIMist® “E” with nozzle type 03C: 7.5 μm ; AKIMist® “E” with nozzle type 04E: 10 μm
-
The air consumption of AKIMist® “E” varies by the nozzle type: AKIMist® “E” with nozzle type 03C: 29 - 116 L/min, Normal ; AKIMist® “E” with nozzle type 04E: 36 – 144 L/min, Normal (with air pressure at 0.3 MPa)
** We define Dry Fog as a very fine fog with a uniform, mean droplet diameter (mean fog droplet size) of 10 μm or less.
Because Dry Fog’s exceedingly fine spray droplets remain intact without bursting when they come into contact with objects such as walls and people, they do not wet these impact surfaces.
“Dry mist,” despite its similar name, has much larger droplets than Dry Fog and has no specified droplet diameter as part of its definition. Dry mist droplet sizes vary significantly by producer and product.
Electronic
Automotive
Plastics
Paper and printing
Agriculture, livestock and cultivation
Demande de devis sur un : Humidificateur à brouillard sec
Demande de devis pour humidificateur à brouillard sec.
Demande de devis pour un humidificateur à brouillard sec.
All you need to run your factory !
