Air treatment

Offers from 1 to 52 of 89

Gas Filters

Find out more

Gas Filters WITT gas filters allow the reliable filtration of the finest dirt particles in gases. Depending on the respective version, the gas filters can filter out particles from 3 to 40 micron and […]

Make a request
Find out more

Inward Fired Combustors : Atlas TCS

Find out more

Effective exhaust management of CVD processes must be able to handle the deposition gases and the associated powders. The fluoride wastes from cleaning gases also require suitable treatment along with […]

Make a request
Find out more

Exhaust Management Systems : M150

Find out more

Edwards offers a range of low-cost, point of use dry abatement systems for semiconductor processing. Each system uses the unique hot bed reactor technology developed for the GRC (Gas Reactor Column) […]

Make a request
Find out more

GaNcat Gas Reactor Column

Find out more

The Edwards GaNcat treats the significant ammonia flows present in the exhausts of nitride-based MOCVD processes by decomposing this gas into its constituent elements, nitrogen and hydrogen, using a […]

Make a request
Find out more

See all offers from EDWARDS SAS

Oil Mist Separator : NOVA300

Find out more

The Nova 300 is suited for all applications involving processes using oil, coolants or other lubricants. The Nova works on all machine tools with a cabin volume up to 70CF (2m³) and has a flow […]

Make a request
Find out more

Oil Mist Separator : ANNA600

Find out more

The Anna 600 is suited for all applications involving processes using oil, coolants or other lubricants. The Anna works on all machine tools with a cabin volume up to 212 CF. The GREEN LINE Series […]

Make a request
Find out more

Oil Mist Separator : LOVA900

Find out more

The Lova 900 is suited for all applications involving processes using oil, coolants or other lubricants. Lova works on all machine tools with a cabin volume up to 318 CF. The GREEN LINE series […]

Make a request
Find out more

See all offers from 3NINE

Frames and installation kits for filter system

Find out more

TECHNICIS proposes a complete line of frames and installation kits adapted to standard dimensions or on request depending on your installation. The guaranty of an efficient filtering system is also to […]

Make a request
Find out more

HEPA/ULPA Filters

Find out more

Our long experience with EPA filters, HEPA filters and ULPA filtration solutions has provided us with a unique capability and product range designed for clean and ultra-clean environments. With EPA, […]

Make a request
Find out more

Powder Filters / Cyclones

Find out more

Powder booth and recovery cyclone. Cyclone and air filtration. Cartridge filters

Make a request
Find out more

Smokes exhauster

Find out more

SMOKES EXHAUSTER   Smokes exhauster or draught accelerator for hot gas, centrifugal, housing and forward wheel or right blades. Manufactured in galvanized steel or stainless steel, welded by […]

Make a request
Find out more

Oil Extractor

Find out more

The SIEBEC H50 oil extractor consists of: a Polypropylene filter body fitted with a fast-opening lid a removable Polypropylene micro-fibre container (capacity 11.5 litres) an automatically primed […]

Make a request
Find out more

Replacement disc diffusers kits

Find out more

 […]

Make a request
Find out more

Air treatment units on gantry

Find out more

Ready to use Built to last Fitted with couplings and plugs Easy to handle PTE: Filter-regulator-lubrificator TB SME3 with gauge and wall bracket for non-lubrificated outlet on gantry PTC: Microfilter […]

Make a request
Find out more

Wet Electro-static Precipitator (WESP)

Find out more

Edwards offers the WESP (Wet Electro-static Precipitator) for the efficient removal of particles downstream of a process chamber abatement device. The system transfers the particles into a water […]

Make a request
Find out more

Pyrophoric Conditioning System (PCS)

Find out more

The Pyrophoric Conditioning System (PCS) is a compact, cost-effective unit using the 'self-oxidation' principle to safely remove silane from PECVD and LPCVD process exhausts to below flammable […]

Make a request
Find out more

Exhaust Management Systems : Spectra-G

Find out more

The Spectra-G is a cost-effective, high performance exhaust treatment solution for nitride MOCVD manufacturing. The Spectra-G can incorporate up to six independent inlet ports. The independent inlet […]

Make a request
Find out more

Exhaust Management Systems : Spectra Z

Find out more

The Spectra-Z system is a cost effective, reliable, high performance exhaust treatment solution for the latest generation Flat Panel Display (FPD) and Solar Cell manufacturing processes.

Make a request
Find out more

Inward Fired Combustors : Atlas Helios

Find out more

Effective exhaust management of CVD processes must be able to handle the deposition gases and the associated powders. The fluoride wastes from cleaning gases also require suitable treatment along with […]

Make a request
Find out more

Oil Mist Separator : NINA1200

Find out more

The Nina 1200 is suitable for all applications involving processes using oil, coolants or other lubricants. Nina 1200 works on all machine tools with a cabin volume up to 424 CF. The GREEN LINE series […]

Make a request
Find out more

Oil smoke and Oil mist separators : LINA 500

Find out more

The Lina 500 is the smallest oil mist separator in the 3nine BLUE LINE Series. It was specifically designed for enclosed machine tools, with a cabin size of 176 CF or less. The Lina oil mist separator […]

Make a request
Find out more

Oil smoke and Oil mist separators : LARA1000

Find out more

The Clara 1000 is 3nine’s most popular oil mist separator. With a flow rate of 600CFM (1000m³/h), it is suitable for just about any type of machine tool with a cabin size not exceeding […]

Make a request
Find out more

Oil smoke and Oil mist separators : EMMA2500

Find out more

The Emma 2500 is the big sister in the 3nine BLUE LINE Series and was designed specifically for applications where a high air flow is essential, such as very large cabin or open machine tool. The Emma […]

Make a request
Find out more

Oil smoke and Oil mist separators : PETRA1000

Find out more

The Petra 1000 is specifically designed to handle applications with a very high solid content, such as cnc grinding, polishing applications, machining of cast iron and heat-treatment (quench oil) […]

Make a request
Find out more

AIRNOX

Find out more

In an perfect motor the fuel would not mix with the air and wouldn't completely burn, forming carbon gas and non toxic steam. The ideal motor doesn't exist and in all motors' exhaust gases we can find […]

Make a request
Find out more

Catalized filter

Find out more

Every day, car drivers, pedestrians, bicyclists, are exposed to toxic gases. Who accepts today the sight of Diesel engines emitting clouds of black fumes and particulates. Recently, studies revealed […]

Make a request
Find out more

AIR TREATMENT SYSTEM

Find out more

1st stage: water seal2nd stage: nozzles3rd stage: drop layers4th stage: resin filters

Make a request
Find out more

Der ULT JUMBO Filtertrolley 2.0

Find out more

The ULT JUMBO Filtertrolley 2.0 takes in air-borne hazardous substances directly where they originate and filters them - and this with high performance, minimum power consumption, minimum noise and […]

Make a request
Find out more

Aspirofilter

Find out more

Ten models to give the perfect response to every requirement. Air cleaner. Throughput from 800 to 2800m³/h to provide the right solution for everything from small lathes to huge machining centres.

Make a request
Find out more

Newton

Find out more

Oil mist eliminators - Newton is a system for the filtration of air in the workplace, capable of eliminating oil mist and smoke caused by a variety of metal machining applications, specifically […]

Make a request
Find out more

Twin

Find out more

The pre-filters in the TWIN line are used to reduce the quantity of fluid pollutants and small quantities of small sized solids which may be present in the air aspirated from machine tools in general. […]

Make a request
Find out more

Spark

Find out more

The SPARK line aspirators, equipped with static filters, are used to reduce the quantity of pollutants, fumes and gaseous emissions that are present in the air aspirated from the processes that […]

Make a request
Find out more

Connection piece

Find out more

Connection piece to connect a ventilator or a ducting ( Ø 250 mm,Ø 160 mm)

Make a request
Find out more

Extraction and filter unit for soldering workstations

Find out more

Parallel to the progressing electro and electronic industry also soldering work is taking an important place. However, during the soldering process smokes, gases and particulates are generated which […]

Make a request
Find out more

Female sleeve coupler

Find out more

Female sleeve coupler for connecting of formed pieces.

Make a request
Find out more

Bends 15°

Find out more

Bends 15° pressed and seam welded. From Ø 280 mm constructed out of segments.

Make a request
Find out more

Bends 45°

Find out more

Bends 45° pressed and seam welded. From Ø 280 mm constructed out of segments.

Make a request
Find out more

Bends 90°

Find out more

Bends 90° pressed and seam welded. From Ø 280 mm constructed out of segments.

Make a request
Find out more

T-piece

Find out more

T-piece centrical constructed. Pressed out of 2 half shells.

Make a request
Find out more

Y-pieces

Find out more

Y-pieces for the branching and reduction of ducting.

Make a request
Find out more

Male sleeve coupler

Find out more

Manchon mâle pour le raccordement de tuyaux.

Make a request
Find out more

Roof hoods

Find out more

Roof hoods out of galvanised sheet. The roof hoods can be inserted for the extraction of outer air and also to exhaust air. The roof hoods are provided with a protective grating and an apron, which is […]

Make a request
Find out more

Filter-Table

Find out more

KEMPER Filter-Table welding table with integrated fan and filter.This heavy duty down-draft welding table is molded from rigid, powder coated sheet metal.The unit features a 2-stage filtering and is […]

Make a request
Find out more

KEMPER Dusty

Find out more

These are only some properties of this small power pack. Two strong turbines provide an excellent extraction efficiency and high static pressing. The minimum weight makes it very flexible and […]

Make a request
Find out more

Mini-Weldmaster

Find out more

This easy to transport high vacuum extraction and filter unit is ideal for the extraction of welding fumes at frequently changing work places.Extraction hoses with a diameter of 45 mm guarantee […]

Make a request
Find out more

Rigid metal tube arms

Find out more

As well as the flexible exhaust arm, the rigid metal tube arm is extremely suitable for the local extraction of welding fumes, gases, damps, slight dusts and solvents.The rigid metal tube arm consists […]

Make a request
Find out more

exhaust arms

Find out more

KEMPER exhaust arms are extremely suitable for extracting welding smoke, gases, damps, slight dusts and solvents. The exhaust arm consists of an interior parallelogram which is spring supported, a […]

Make a request
Find out more

Exhaust arms for upright assemblies

Find out more

The KEMPER exhaust arms for upright assemblies are very suitable for worktables, adequate exhaust appliances or existing exhaust machines.The provided flange will be screwed directly on the […]

Make a request
Find out more

Exhaust arms for rail channels

Find out more

In order to expand the range of the exhaust arms they can be connected to carriages on an extraction rail channel. Then, the exhaust arm can be moved across the full length of the channel. This is an […]

Make a request
Find out more

Telescopic exhaust arms

Find out more

The telescopic arm has been designed especially for welding schools where small welding tables are in use.In these places it is difficult to use the standard exhaust arm, which would disturb the […]

Make a request
Find out more

exhaust cranes 160 mm

Find out more

The ball bearing swivel exhaust crane is as well as the exhaust arm ideally suitable for local extraction of hazardous substances. The two part crane boom is suitable to suspend 50 kg from the first […]

Make a request
Find out more

exhaust cranes 250 mm

Find out more

The KEMPER exhaust cranes with a diameter of 250 mm are very suitable for the extraction of higher air flows. They can be used where huge amounts of dusts are produced during industrial processes.

Make a request
Find out more