Construction site equipment

Offers from 1 to 45 of 45

Safety mobile ladder

Find out more

  The safety mobile ladder is equipped with two retractable wheels and a draft bar (patented systems) which provide easy mobility. This system also acts as a safeguard as it prohibits the access […]

Make a request
Find out more

Safety mobile ladder for tankers

Find out more

The safety mobile ladder is equipped with two retractable wheels and a draft bar (patented systems) which provide easy mobility. This system also acts as a safeguard as it prohibits the access to the […]

Make a request
Find out more

Safety mobile ladder

Find out more

  The safety mobile ladder is equipped with two retractable wheels and a draft bar (patented systems) which provide easy mobility. This system also acts as a safeguard as it prohibits the access […]

Make a request
Find out more

See all offers from TRIAX

SECURING LADDER ACCESS

Find out more

Blocking access panel in galvanized steel or aluminum with a height of 1900 mm and a circular cover (A+B protection+European built in half-cylinder or locking system+holding device of the panel in […]

Make a request
Find out more

ANTI-MOUNTED DOOR FOR FIXED LADDER

Find out more

Blocking access panel in galvanize steel or aluminum with a height o 1800 mm (Type A protection)+ European  built in half-cylinder locking+automatic holding device of the panel in open position […]

Make a request
Find out more

PIVOTING REST PLATFORM FOR FIXED LADDER

Find out more

The pivotal intermediate landing platform in galvanized steel allows to separate fixed ladders when the crossing height is higher than 8m. Material can be adapted on all ladders Unlocking by rising […]

Make a request
Find out more

See all offers from COUTIER INDUSTRIE

Colouring agent for cement, lime and plaster : DORTHZ COLOR

Find out more

DORTHZ COLOR  is a powdered colouring agent that contains mineral oxides. ADVANTAGES : • Wide range of 5 compatible colours. • Low consumption. • Very good heat resistance. • […]

Make a request
Find out more

Coil holders : MINOCABLE

Find out more

For use on sites, as well as in workshops and laboratories - Suitable for spools with max diameters of 400 mm, and having a central hole of at least 12 mm in diameter - For coils, it may be […]

Make a request
Find out more

Measuring device M3

Find out more

Counter in dm measuring up to 9999.9 metres. Measuring wheel width : 25 mm. Development : 200 mm. Made of striated metal. Manual use. Dimensions and weight (M3-T) : l 130 x w 250 x h 140 mm 1,9 kg. […]

Make a request
Find out more

Measuring device M35-T desk-top model

Find out more

Counter in cm measuring up to 9999.95 metres. Measuring wheel width : 35 mm. Development : 500 mm. Made of striated metal or striated synthetic material (for metal cables). Resistant aluminium […]

Make a request
Find out more

See all offers from CABLE EQUIPEMENTS

Wire-actuated encoder SDE04

Find out more

Wire-actuated encoder with a freely programmable electronic digital display. Linear distance measurement up to 1000 mm. Long battery life. Easy battery change without dismantling of the device. LCD […]

Make a request
Find out more

Plastic Fasteners

Find out more

Wide Range of Plastic Fasteners. From Screws, Nuts, Bolts, Washers, Spacers.... Made in Polyamide ( Nylon ) Natural for most Standard, Other materials or Colors on request.

Make a request
Find out more

Protection Covering Finishing

Find out more

Screw Caps, Covers for Hex Screws and Nuts, Soft PVC / Vynile Covers, Plugs for Tube ends...

Make a request
Find out more

200*300 mm Square

Find out more

Ces équerres de maçon de 200*300 mm sont fabriquées en acier inoxydable et permettent la mesure des deux côtés avec les systèmes d'unité métrique et impérial.

Make a request
Find out more

8" Flanged Square - 6 pcs

Find out more

Ces équerres de menuisier de 20 cm sont fabriquées en acier inoxydable et permettent la mesure des deux côtés avec les systèmes d'unité métrique et impérial.

Make a request
Find out more

SAFETY DOOR FOR A FIXED LADDER

Find out more

Access blocking panel in galvanized steel, 1900 mm in height with a circular cover (A+B protection), European locking half-cylinder built in+locking pedal at descent. Material complies with the NF E […]

Make a request
Find out more

CHECK LADDER ACCESS

Find out more

Pivoting shutter for blocking access in galvanized steel or aluminum for crinoline ladder (Type B protection) Padlock locking device. Material complies with the NF E 85-012 norm. Available in stock […]

Make a request
Find out more

Floor measuring device M35-P

Find out more

Extremely stable feet (17 kg) which can be adjusted to 3 heights (650, 740 or 820 mm). M35-P On floor model (codes : E3350353 with metal wheel and E3350356 with sythetic wheel). […]

Make a request
Find out more

Desk-top measuring device M50-T

Find out more

Measuring wheel width : 50 mm. Development : 500 mm made of striated synthetic material or polyurethane (intensive use). Guided at the entry and exit by 4 steel rollers and under the measuring wheel […]

Make a request
Find out more

Floor measuring device M-P

Find out more

Extremely stable feet (17 kg) which can be adjusted to 3 heights (650, 740 or 820 mm). Diameter : 1 to 50 mm.

Make a request
Find out more

Shear-measuring device OD

Find out more

For a maximum diameter of 15 mm. Dm counter measuring up to 9999.9 metres. 200 mm development measuring wheel made of striated metal. Dimensions and weight (OD-T) : 300 x 300 x H 430 mm. 7,1 kg.

Make a request
Find out more

Measuring device MC-35

Find out more

Fitted with a stationary pair of ratchet shears SR 52. Features identical to those of  the M35. Dimensions: l 290 x W 470 x H 700 mm. Weight : 17,2 kg.

Make a request
Find out more

ODO1 odometer

Find out more

Measurements up to 9,999.9 metres. 1 metre development measuring wheel. 3-position telescopic handle. Retractable lever handle, brake and scraper. Reset lever. Delivered with a carrying kit.

Make a request
Find out more

ODO2 odometer

Find out more

Measures up to 99 999.9 metres LNE approved Highly readable counter (large digits, 7 mm high) 1 metre development measuring wheel Folding handle and pistol grip Central tripod, brake and scraper Reset […]

Make a request
Find out more

Cable drum unwinders 5 to 7 Tons

Find out more

- Mobile rear rollers Capacity (it can carry) : 7000kg Ø of Drums accepted : Ø750-2200 mm Max Width : 1350mm Weight : 139kg Dimensions of one shoe : l 450 x w 1750 x h 245 mm

Make a request
Find out more

Cable drum unwinders 7 to 10 Tons

Find out more

- For cable drums with diameters 750 to 3400 mm - Weight 246 kg - 10 ton jacks - Detachable roller support for allowing the cable drum to be inserted - Shoe length: 2000 mm

Make a request
Find out more

Wormscrew jack SM12

Find out more

Easy unwinding of large cable drums, even if they are damageds. The SM12 is made up of several parts: - two stands (the rear foot of which can be detached) - a shaft with centring pins; It can thus be […]

Make a request
Find out more

Handling Measuring Device M3

Find out more

Easily Handling material thanks to the handle (11cm) and to its low weight (1,4kg), this device let you measure cables, pipe and flexible until Ø22mm. Counter in dm measuring up to 9999.9 […]

Make a request
Find out more

Euro formwork prop

Find out more

the proven prop for traditional building construction, hand crush and failure guards make handling these props safer. Our Euro formwork props comply with the current requirements of DIN EN 1065 for […]

Make a request
Find out more

Folding jack

Find out more

Folding jack „Universal“ U1500 very robust design with supporting cross tube of square tube and side welded tube socket for installation of railing posts as back guard to protect from […]

Make a request
Find out more

formwork accessories

Find out more

Head for formwork prop: can be fitted on top of formwork props to hold the wood formwork support for which 4 corner angles are welded Tripod stand: the formwork prop can be fixed simply by a bracket […]

Make a request
Find out more

Oil tank / HYDROLIC TANK

Find out more

Hydraulic Tank naked or with return filter, filler and  breather cap , oil level gauge , drain plug , epoxy oven paint compliant with polyurethane , internal cleaning . Our tanks can be delivered […]

Make a request
Find out more

Oil tank / HYDROLIC TANK

Find out more

Hydraulic Tank naked or with return filter, filler and  breather cap , oil level gauge , drain plug , epoxy oven paint compliant with polyurethane , internal cleaning . Our tanks can be delivered […]

Make a request
Find out more

Nozzles and Nozzle Carrier Heads

Find out more

Hydraulically driven rotating water tool for surface treatment and concrete removal (hydrodemolition).Can be attached to traversing units, building machines and robots. It consists of carrier frame, […]

Make a request
Find out more

Pump Sets

Find out more

Robust diesel pumps for heavy duty in building sector, industry, communities, agriculture as well as national and international aid organisations. World-wide approved HATZ diesel engines with long […]

Make a request
Find out more

MOBILE SCAFFOLDING FOR TRUCKS AND BUS

Find out more

MOBILE SCAFFOLDING FOR TRUCKS AND BUS The ideal scaffolding to install windshield for trucks and bus. Working height capacity 3 m . TUEV approved, load capacity 200 kg/m² (scaffolding class 3) in […]

Make a request
Find out more

Hydraulic Axles

Find out more

Tuthill Drive Systems provides the world’s most demanding Original Equipment Manufacturers with custom designed hydraulic powered and non-powered axle systems. Customers like John Deere, Claas, Case […]

Make a request
Find out more

GCS600 Grade Control System

Find out more

The GCS600 Grade Control System is a highly flexible, cross slope and elevation control system designed to be used on motor graders for fine grading work. The GCS600 uses two AS400 angle sensors and […]

Make a request
Find out more

Spectra Precision Laser GL700

Find out more

Get the right laser for the right job. Construction-tough Spectra Precision® Laser GL700 Series Grade Laser Transmitters provide years of durable, precise performance on your job site.Choose from […]

Make a request
Find out more

GCS600 Grade Control System for Excavators

Find out more

The Trimble® GCS600 Grade Control System for Excavators is a highly flexible laser-based system designed for excavation, trenching, grading and profile work. The Trimble GCS600 is idea for […]

Make a request
Find out more

Spectra Precision Laser GL512 and GL522

Find out more

The Spectra Precision® Laser GL512 single grade and GL522 dual grade transmitters are rugged, cost-effective, automatic self-leveling lasers that do three jobs—level, grade, and vertical […]

Make a request
Find out more

GCS900 Grade Control System

Find out more

One of the most revolutionary changes in the way earthworks are performed has been the introduction of 3D systems originally by Trimble in 1995. The Trimble® GCS900 Grade Control System represents the […]

Make a request
Find out more

GCS500 Grade Control System

Find out more

The GCS500 Grade Control System is a cross-slope control system designed to be used on motor graders for fine grading work. The system uses two AS400 angle sensors and one RS400 rotational sensor to […]

Make a request
Find out more

GCS400 Grade Control System

Find out more

Dual Elevation or Elevation and Blade Slope ControlThe GCS400 Grade Control System is a dual-control system that controls both the lift and tilt of the machine blade. This is done by connecting two […]

Make a request
Find out more

Spectra Precision Laser DDS300 Display System

Find out more

The Spectra Precision® Laser DDS300 Depth Display System from Trimble introduces a new level of productivity for compact equipment including backhoes, mini-excavators and smaller excavators. The […]

Make a request
Find out more