Stationary welding smoke extraction units with two KemTex® ePTFE filter cartridges are developed for industrial use. Due to self-cleaning filter cartridges it is suitable for the frequent use at heavy duty applications. It can be mounted to the wall, a column or a free-standing pillar.
The filter cartridges work according to the principle of surface filtration, the captured dust particles cannot penetrate the filter media. This is achieved by an KemTex® ePTFE membrane which is laminated onto the actual cartridge filter material.
The unique microstructure of the KemTex® ePTFE-membrane consists of millions of fine fibres, which hold back even the smallest particles. Especially during the welding and cutting process superfine particles are generated, which are averaged between 0,1 µm and 1,0 µm. They are therefore alveole exchangeable. Especially those particles deposit on the alveole (pulmonary alveoli), reach the bloodstream, could diffuse through the vascular wall and then deposit in the body.
The filter status, as well as all the other functions will be controlled by the integrated control. Reaching a certain limit value, the filter cartridges will gently be cleaned one after another and the collected dust can easily be disposed by the dust collecting bin. The stationary cartridge filter could directly be equipped with a flexible exhaust or a rigid metal tube arm with a length of 2 m, 3 m and 4 m or by means of a console with 5 m, 6 m and 7 m long arms.
All you need to run your factory !
