Coffret complet pour dénudage de câbles de 50 mm² à 240 mm² - CNPT/240-1-MV-NG

Coffret complet pour dénudage de câbles de 50 mm² à 240 mm² - CNPT/240-1-MV-NG - PENTA Electrical Safety Products

Complete box for cutting cables from 50 mm² to 240 mm² without CT - CNPT/240-1-MV-NG - Tools

Coffret complet pour dénudage de câbles de 50 mm² à 240 mm² - CNPT/240-1-MV-NG - produit présenté par PENTA Electrical Safety Products

Complete box for cutting cables from 50 mm² to 240 mm² without CT - CNPT/240-1-MV-NG

Tools

“ - Saves time by simplifying the cable preparation process - Preparation of cables from 50 to 240 mm² without having to create cones at the end of the insulation - Reduces the cutting process ”

Ask for a quote

Penta presents its CNPT/240-1-MV-NG complete box, the kit ideally designed for preparing cables with cross-sections ranging from 50 to 240 mm², and which does not require the tedious creation of insulation cones.

Designed to meet the most stringent standards and offer maximum efficiency, this kit is a must-have for cabling professionals.

Compliance standards :

The components of the CNPT/240-1-MV-NG case are compatible with C33-226, UTE C33-223, NF C 33-223 and HN33S23 cables.

Simplified use:

This kit has been designed to save you time by simplifying the cable preparation process. You can now prepare cables from 50 mm² to 240 mm² without having to create cones at the end of the insulation, which considerably reduces the cutting process.

Features of the CNPT/240-1-MV-NG :

Here's what you'll find in this box:

- MF2/40: Sheath and insulation cutting
- MF1+/25: Removal of non-peelable semiconductor
- SRC: Cutting the peelable semiconductor with a chamfer on the stop
- SCH : Chamfer at the end of the insulation
- ALROC-FENTE : Slot cutting
- ROTO-TMG: Maintaining RSMs
- GFE-TMG: Tightening the sheath and deforming the core for ROTO-TMG
- K7/GRATT: Abrasion of outer sheath for ROTO-TMG
- EV/NPT: Spreading the sheath
- EV2000 150-240: Flare the sheath
- EV150-240: Sheath flaring
- GRI: Scrape off residues of unpeelable semi-finished material
- P115: Fitting clamps.

For cabling professionals, performance and compliance with standards are essential. The CNPT/240-1-MV-NG box meets these requirements, offering a complete solution for your cable preparation needs. Simplify your work and ensure that every cable is ready for operation safely and efficiently.

Technical features

MF2/40 : section of sheath and insulation MF1+/25 : removal of non-peelable semiconductor SRC : incision of the peelable semiconductor with a chamfer on the stop SCH : chamfering the end of the insulation ALROC-SLOT : slotting ROTO-TMG : maintaining the RSMs GFE-TMG : tightening the sheath and deforming the core for ROTO-TMG K7/GRATT : abrasion of the outer sheath for ROTO-TMG EV/NPT : spreading the sheath EV2000 150-240 : flare the sheath

Download the complete technical features