Cables

Offers from 1 to 52 of 439

Electro-hydraulic compression tool ESDC60K1BLCM

Find out more

Kit composition: Crimping tool 2 batteries 18 V / 4 Ah Charger 220V Metallic carry case Dies: please ask MECATRACTION

Make a request
Find out more

Hand crimping tool for end sleeves

Find out more

This hand crimping tool enable the crimping of end sleeves from 0.08 to 16 mm²

Make a request
Find out more

Hand crimping tool KEB16L for end sleeves

Find out more

Hand tool specially dedicated to the crimping of preinsulated end sleeves from 0.08 to 16 mm².

Make a request
Find out more

See all offers from MECATRACTION

Automatic winding reels

Find out more

- Cable roller guide. - Ratchet stop device every 50 cm., easily removed if constant traction of cable is required. - Double earth contact. - Collector insulating power 2,5 Kv. - Slipring with brass […]

Make a request
Find out more

Prefileuse

Find out more

The tool that finally gives you the pre-wiring exactly in accordance with your needs (strong current, weak current, etc.) Save time by preparing your sites in advance. For sheaths with Ø 16 to […]

Make a request
Find out more

Portable coil holders for wire coils, up to 6² : QUAD Range

Find out more

Fitted with 1, 3, 4, 6 or 9 spools with straps, with diameters of 300 mm, max width: 100 mm. Decrease risk of entangling : Wires are "brushed" into the sheath - less pulling effort. […]

Make a request
Find out more

See all offers from CABLE EQUIPEMENTS

Cable ladder

Find out more

TROAX cable ladder kit is used to fi x different cable ladder systems to our posts.

Make a request
Find out more

Cable glands / Cable fittings

Find out more

Materials: polyamide, nickel plated brass, stainless steel

Make a request
Find out more

Kurzer, einteiliger Dichtungseinsatz Kurzes Anschlussgewinde Pg

Find out more

• Material: nickel-plated brass• Antikink spring: Stainless steel A2• Seal: TPE• O-ring: NBR• Strain relief: acc. to EN 50262• Version A to metric entry threadShort, one-piece sealing insertShort […]

Make a request
Find out more

Combination conduit glands with integrated EMC cable

Find out more

• Material: nickel-plated brass• Seal: TPE• O-ring: NBR• Strain relief: acc. to EN 50262,• version A• Protection class: IP68 (cable gland) Protection class on the conduit gland depends on the type of […]

Make a request
Find out more

Cable glands Ex Compact MS flame proof enclosure Ex d IIC increased safety Ex e II

Find out more

• Material: Messing vernickelt• Dichtung: HNBR- Prüfnorm: EN 60079-0/EN 60079-1- EN 60079-7Anschlussgewinde metrischEinteiliger Dichtungseinsatz (nicht durchgehend isoliert)Auf Anfrage lieferbar:- […]

Make a request
Find out more

See all offers from SES-STERLING SA

Decoilers

Find out more

Dynamics and reliability, user friendliness, plant safety and short set-up times are features of the decoilers made by ARKU. They accommodate coils weighting up to 30 tons.Upgradable automation stages […]

Make a request
Find out more

Decoilers for high productivity

Find out more

Coil preparation and loading takes place in parallel with the processing operation. At the end of the strip, the decoiler is turned into position to replace the loading process. This takes just 30 […]

Make a request
Find out more

C.A 6681 LOCAT-N cable and metal-pipe detector

Find out more

Locate hidden cables The C.A 6681 LOCAT-N cable and metal-pipe detector is ideal for housing renovation, building maintenance and operations after incidents. Comprising a transmitter and a receiver […]

Make a request
Find out more

Portable coil holders for wire coils, up to 6² : QUAD

Find out more

Fitted with 1, 3, 4, 6 or 9 spools with straps, with diameters of 300 mm, max width: 100 mm Decrease risk of entangling : Wires are "brushed" into the sheath - less pulling effort […]

Make a request
Find out more

Pulley RS12

Find out more

Roller with ball rollings Width : 200 mm Ø : 150 mm Space requirement : 245 x 245 x 245 mm Weight : about 10 kg

Make a request
Find out more

Pulley RS13

Find out more

Roller Width : 200 mm Ø : 150 mm Space requirement : 230 x 120 x 241 mm Weight : 9,3 kg

Make a request
Find out more

Floor troughs

Find out more

Available in grey or brown Already provided with double-sided adhesive. FLOOR TROUGHS Extremely soft leading edge. 2 separate compartments. Allows passage of several wires and cables (max Ø of […]

Make a request
Find out more

Cable protection : DOUBLE

Find out more

2 compartments to separate the strong and weak currents. One compartment of 10 mm x 30 mm One compartment of 10 mm x 20 mm Width at base : 108 mm Height : 14 mm Sold in 1,50 mètre or […]

Make a request
Find out more

Pedestrian bridge

Find out more

3 models further your need : Cable protectors in rubber or polyurethane Easy to instal thanks to dovetails Striated surface Anti Slip for people safety Could be made with your logo (only PP30G80) for […]

Make a request
Find out more

PULLEY RA31

Find out more

Triple pulley 3 rollers Width : 115 mm Ø : 220 mm Space requirement : 650 x 380 x 380 mm Weight : 15kg

Make a request
Find out more

Cable protection : ONDEO

Find out more

Ideal to pass cables through the floor without affecting the aesthetics of the area (offices, conference rooms, lounges). 2 12 mm Ø ducts and 2 10 mm Ø ducts. Part : length 870, […]

Make a request
Find out more

KATI-BLITZ Fiber Glass Fish tape : KATI-BLITZ

Find out more

The KATI-BLITZ (KB330 code) includes : - The fiberglass rod in a crankcase  - The pull handle KATI-GRIP   - Two guide heads (Ø 7 mm and Ø 10 mm) - 5 eyes […]

Make a request
Find out more

Coil holders : SATELLITE

Find out more

- Unwinding a coil is a real problem on the sites: either the plastic film is retained and one gets a completely twisted “pigtail” ; or it is removed and then it becomesdifficult to […]

Make a request
Find out more

Fiberglass pulling needle KATI-BLITZ

Find out more

The strength of fiberglass, combined with the flexibility of the guide head, gives the needle a dynamism that allows it to sneak into all ducts : - Even of great length - Even cubits - Even […]

Make a request
Find out more

Pull handle KATI-GRIP for pulling device KATI-BLITZ

Find out more

It greatly increases your pulling strength and avoid injury. To always have on hand, the KATI-GRIP is attached to the KATI-BLITZ crankcase by a detachable carabiner.

Make a request
Find out more

Coil holders : ESCABOCABLE

Find out more

- Being both trolley and unwinder at the same time, it is ideal for operations on a site. Being foldable, it takes up very little space in a vehicle.It does not damage anything in its […]

Make a request
Find out more

Site coil holders : VARIO PLUS

Find out more

Can be packed in a bag which can be carried over the shoulder, thus leaving one’s hands free. Aluminium Material External Diameter : 740 mm Internal diameter : from 150 to 260 mm […]

Make a request
Find out more

TRONIC trolley

Find out more

The TRONIC spool is suitable for wire coils with a maximum outside diameter of 295 mm and a maximum width of 80 mm. Depending on the packaging, it is generally suitable for wire up to 6². The […]

Make a request
Find out more

TRONIC trolley

Find out more

- Chassis made of epoxy resin coated steel, - 2 wheels with Ø 200 mm, - 12 thread guides - tool-carrier. - Dimensions : l 700 x w 600 x h 950 mm - Weight : 22 kg

Make a request
Find out more

Cable drum unwinders : COMPACT 200

Find out more

Folds and unfolds in just 3 clicks and 6 seconds! It has all the advantages: - as stable as a single-piece unwinder, thanks to 2 connecting bars and anti-skid bases - and yet it requires the least […]

Make a request
Find out more

Automatic winding reels : 7000 RANGE

Find out more

- Shock resistant plastic external case - Cable roller guide - Ratchet stop device every 50 cm. All cable reels are supplied with predisposition for cable-stop device off. It can be easily inserted - […]

Make a request
Find out more

Coil and spool dispenser : ADJUSTABLE BOBI

Find out more

Upgradeable system 6 vertical bars screwed into the central bar according to the width of the spools 3 forks per vertical bar: one can thus stack up to 3 small spools. Delivered with a shaft : […]

Make a request
Find out more

Automatic winding reels : 4000 RANGE

Find out more

- Shock resistant plastic external case - Cable roller guide - Ratchet stop device every 50 cm., easily removed if constant traction of cable is required - Double earth contact - Collector insulating […]

Make a request
Find out more

Coilers with cranks : EM060

Find out more

Steel frame Plastic drum Capacity 100 metres of a cable Ø 7 mm or 60 metres of a cable Ø 10 mm or 30 metres of a cable Ø 15 mm Dimensions Diameter of the […]

Make a request
Find out more

Coilers with cranks : EM100

Find out more

Steel finish epoxy Wheels with brakes Capacity 100 metres of a Ø 10 mm cable or 57 metres of a Ø 15 mm cable or 42 metres of a Ø 20 mm cable or 21 metres of a Ø 30 mm […]

Make a request
Find out more

Coilers with cranks : EM050 - EM050P

Find out more

Without plugs, with flask ok undrilled closure Galvanised steel Rigide and stable chassis Cahoutchouc carrying handle Drum in heavy plate, stamped, unbreakable Capacity 70 metres of a Ø 5 mm […]

Make a request
Find out more

Coilers with cranks : EM230 - EM230R

Find out more

Steel finish epoxy EM230: without wheels EM230R : 4 wheels with brakes Capacity 230 metres of a Ø 10 mm cable or 150 metres of a Ø 15 mm cable or 80 metres of […]

Make a request
Find out more

Automatic winding reels : NX Range

Find out more

The pawl is not removable. Horizontal operation Plastic material, high resistence. Equiped with plugs 2P+T (both side) Protection : IP42 Operating temperature: -5°C/+40°C 15 mèters […]

Make a request
Find out more

Cable drum unwinders : PRIMO 160

Find out more

- Stable thanks to 2 connecting bars and anti-skid bases - Adjustable in width, by widening the 2 shoes - A diameter which can be adjusted in a single step (sliding rollers) - Very light (4.9 kg) - […]

Make a request
Find out more

Cable drum unwinders : LIGHT 150

Find out more

- Lightweight (6.6 kg) - Very stable on the ground (4 anti-skid pads) - Round bar for comfortable carrying - Slight gradient for easy loading - Rapid adjustment of both […]

Make a request
Find out more

Automatic winding reels ERNX0325/10 Model

Find out more

The pawl is not removable. Horizontal operation. Plastic material, high resistence. Equiped with plugs 2P+T (both side). Protection : IP42. Operating temperature: -5°C/+40°C.

Make a request
Find out more

Cable drum unwinders : LIGHT 300

Find out more

- For cable drums with diameters between 300 and 1050 mm max width: 580 mm - Weight: 11.2 kg - Easily adjustable rear roller (spring-loaded shaft) - Capacity (it can carry) : 300kg - […]

Make a request
Find out more

Unwinder for all cable drums : STG1500

Find out more

- Can be dismantled into 4 parts - Can be adjusted according to the diameter (3 positions for the rear roller) - Adjustable in width, by widening the shoes - Polyurethane rollers: better grip of the […]

Make a request
Find out more

Unwinder for all cable drums

Find out more

- Can be dismantled into 4 parts - Can be adjusted according to the diameter (3 positions for the rear roller) - Adjustable in width, by widening the shoes - Polyurethane rollers:better grip of the […]

Make a request
Find out more

Automatic winding reels

Find out more

 - Shock resistant plastic external case - Cable roller guide - Ratchet stop device every 50 cm., easily removed if constant traction of cable is required - Double earth contact - Collector […]

Make a request
Find out more

Classic unwinders with rollers : 0T200

Find out more

Capacity (it can carry) : 200kg Ø of Drums accepted : Ø400-800 mm Max Width : 520mm Weight : 15kg Dimensions: l 560 x w 690 x h 115 mm

Make a request
Find out more

Classic unwinders with rollers 0T800

Find out more

- System for locking the front roller for easing unloading operations. - Waterproof bearings. - Capacity (it can carry) : 800kg - Ø of Drums accepted : Ø600-1050 mm - Max Width […]

Make a request
Find out more

Automatic winding reels : XL Range

Find out more

- Rubber cable guide - Ratchet stop device every 50 cm., easily removed if constant traction of cable is required - Double earth contact - Collector insulating power 2,5 Kv. - Slipring with brass […]

Make a request
Find out more

Automatic winding reels NX Range

Find out more

The pawl is not removable. Horizontal operation. Plastic material, high resistence. Equiped with plugs 2P+T (both side). Protection : IP42 Operating temperature: -5°C/+40°C. […]

Make a request
Find out more

Classic unwinders with rollers : 1T200

Find out more

- System for locking the front roller for easing unloading operations - Waterproof bearings Capacity (it can carry) : 1200kg Ø of Drums accepted : Ø600-1200 mm Max Width : […]

Make a request
Find out more

Automatic winding reels PL Range

Find out more

Die-cast aluminium case - Cable roller guide - Ratchet stop device every 50 cm. All cable reels are supplied with predisposition for cable-stop device off. It can be easily inserted. - Double earth […]

Make a request
Find out more