Copy milling machine - FC 380 S

For 4-sided machining with 270 ° swiveling (without loosening the profile) of all non-ferrous alloy profiles, in particular aluminum and steel profiles (maximum thickness 3 mm).

Copy milling machine by template or stop system.

This machine mounted on fixed frame is equipped with :

• TRI 400 V motor, power 0.75 kW.
• Spindle speeds 3000 to 13000 rpm by electronic dimmer.
• Milling head.
• Profile maintained by 2 horizontal cylinders and 2 vertical cylinders on a cradle support. The profile can rotate from 0 ° to 270 ° (indexed by 90 °) on its axis. Pneumatic lock in position.
• Rotational movement designed so that the positioning of the machining does not change at 0 ° and 180 °.
• 2 control handles for manual movement of the milling head.
• Start the spindle motor by pressing the trigger handle.
• 2 adjustable depth stops.
• Foot pedal for lifting the pneumatic copying finger (and 6-position revolver).
• 1100 mm length stop with pneumatic stop, on both sides.
• Pneumatic locking of the head along the vertical axis.
• Template with 1 finger of copying Ø 5/6/8 mm.
• 3 collets Ø 6/8/10 mm.
• Set of graduated length stops.
• Spray lubrication system.
• Pneumatic blower.
• Couple of roller paths length 500 mm.