Schleuniger's ACO 05 crimp force monitor is a versatile, user-friendly system designed to electronically monitor each crimp and compare the measured value to a known good reference crimp. Its standard PC software captures basic statistical parameters while monitoring crimp curves. It serves as an ideal companion to Schleuniger's full line of crimping equipment.
The Schleuniger ACO 05 crimp force monitor offers 100% inspection for your crimping operations. A piezoelectric force sensor placed under the applicator measures the crimping force. The monitor creates a series of time-force curves during the reference phases to arrive at a reference signature. Each subsequent crimp is compared to the reference curve and the specified tolerance range. The ACO 05 will automatically indicate whether a crimp is acceptable or not.
The ACO 05 can be mounted on crimping or strip & crimp machines such as UniCrimp 200 or StripCrimp PP3 by your local Schleuniger sales & service representative.
Simple & Easy , But Yet Refined :
Crimp force monitors have typically been very complex. The ACO 05 user interface and software were designed with simplicity in mind. The display is easy to read and there are only five buttons to scroll through the simple software. Additional and more complex functionalities are part of the package and readily available - if they are needed.
The ACO 05 includes a PC interface and the WinCrimp PC software, so crimp curves can be analyzed on a PC if desired. A printer interface allows you to automatically print out crimp monitor data at the end of each batch.
All you need to run your factory !
