TURNAMAT is the economic solution for deburring bent tubes, complex profile shapes and workpieces high in weight or burrs. Deburring typically only takes three seconds. The markedly robust machines simultaneously deburr inside and outside edges without manually turning the workpieces. With manual workpiece feeding this means: shorter set-up times!
In addition to the typical rotation the radial brush also performs a second rotation: the entire drive unit rotates. Inner and outer edges are machined evenly.
TURNAMAT for symmetrical workpieces can be changed to a different workpiece diameter within seconds using a lever. CE certification proves the high safety standard. Asymmetrical workpieces can be safely deburred on the TURNAMAT. Profiles are fed through a precisely fitted front plate which can easily be changed without tools.
-
Simultaneously deburrs inner and outer edges
-
No manually turning the workpiece
-
Brush change in under two minutes
Your quality advantage:
-
High performance brushes ensure reproducible results
-
Residue-free deburring even on larger cross-sections
Your cost advantage:
-
Built-in drawer for wood chips
-
No sensory linking required between deburring system and robot
-
High ROI – less than 12 months
My name is Oscar Agundis and I work as a maintenance supervisor, we have some brushes TURNAMAT series 2976, I would like to know if you can send us the spare parts for these brushes and I would like to know if you have a list of spare parts for these brushes.
All you need to run your factory !
