All products of ESBELT

POLER SERIES Conveyor belts

Thermoplastic polyester belts, physiologically neutral (non-toxic) for food conveyance, and […]

Find out more

Conveyor belt KERAM SERIES

Thick belts made of extra hard PVC or PU, with two plies, the top one a monoply fabric with a non […]

Find out more

VERNA SERIES conveyor belts

Belts with polyolefin or transparent silicone top cover. Depending on the belt type, the bottom cover […]

Find out more

DRAGO SERIES conveyor belts

Green coloured PVC belts with a chemical composition similar to BREDA belts, differing in their […]

Find out more

Food conveyor belt CLINA SERIES

Belts with PVC, PU or polyester fabric top cover, non toxic and resistant to animal and vegetal oils […]

Find out more

DRAGO SERIES conveyor belts

Green coloured PVC belts with a chemical composition similar to BREDA belts, differing in their […]

Find out more

Conveyor belts Febor series

PVC belts apt for a wide range of non alimentary applications that do not require a special resistance […]

Find out more

VERNA SERIES conveyor belts

Belts with polyolefin or transparent silicone top cover. Depending on the belt type, the bottom cover […]

Find out more

Food conveyor belt CLINA SERIES

Belts with PVC, PU or polyester fabric top cover, non toxic and resistant to animal and vegetal oils […]

Find out more

HIPRO SERIES Conveyor belts

Conveyor and process belts especially designed for use in difficult working conditions. Their excellent […]

Find out more

NOVAK SERIES Conveyor belts

Blue, non-toxic PVC or PU belts, resistant to animal and vegetable oils and fats. This is a range […]

Find out more

Conveyor belt splicing MVP Almex presses type MVP

Light presses for vulcanising thermoplastic belts, with a 200 mm wide plate.

Find out more

LPBE-1600A LPBE-1600A Lighter conveyor belt press

Designed for the vulcanisation of thermoplastic belts. Max. belt width: 1,600 mm

Find out more

LPBE-600AC LPBE-600AC Conveyor belt press

Designed for the vulcanisation of thermoplastic belts. Max. belt width: 600 mm AIR COOLED

Find out more

LPBE-1100-A LPBE-1100-A New Conveyor belt press, ligther

Portable press designed for the vulcanisation of termoplastic belts “in situ”. Max. belt width: 1.100 mm

Find out more

LPBZ-1000 LPBZ-1000 Manual conveyor belt press

Two 1,050 x 180 mm heating plates with 2 resistors Maximum splice length: 1000 mm

Find out more

LPCZ50 Portable transmission belt press LPCZ50

Easy-to-use portable press, for splicing transmission belts.

Find out more

LPCZ100 Portable transmission belt press LPCZ100

Easy-to-use portable press for splicing transmisssion belts.

Find out more

LPCZ30 "Clamp" type press for transmission belts LPCZ30

Easy-to-use portable press for splicing transmission belts

Find out more

LPCE300 Transmission belt press LPCE300

A portable press for splicing transmission belts, providing an excellent finish.

Find out more

LPBE-1100 LPBE-1100 Conveyor belt press

Designed for the vulcanisation of thermoplastic belts. Max. belt width: 1,100 mm

Find out more

Transmission Flat Belts LEATHER

High-efficiency leather flat-belts: automatic lathes, centrifugal pumps, light construction textile […]

Find out more

Transmission Flat Belts GRAPHIC BELTS

These belts can be used in various processing machines for paper, books, magazines and others.  […]

Find out more

Transmission Flat Belts SPINDLE TAPES AND TANGENTIALS

These belts can be used in various Spinning Machines. Fabric is resistant to breakings. New rubber […]

Find out more

Transmission Flat Belts TRANSMISSION BELTS

Power transmission belts where one side is used. Rubber here is used when efficient power transfer […]

Find out more

LCM 210RE Longitudinal cutting automatic slitter LCM210RE

Designed for the longitudinal cutting of conveyor belts. Maximum belt width: 2,150 mm.

Find out more

LCCB500 Circular slitter for transmission belts LCCB500

It enables belts of up to 7 mm thick (one or more at a time) to be cut, with a minimum cut width of 2 […]

Find out more

LCCB300 Circular slitter for transmission belts LCCB300

It enables belts of up to 7 mm thick (one or more at a time) to be cut, with a minimum cut width of 2 […]

Find out more

LSM1000 Longitudinal welding machine LSM1000

Machine for welding 2 longitudinal profiles to belts with a maximum width of 1,000 mm.

Find out more

LSM1200R LSM1200R Welder for longitudinal profiles and...

Machine for welding profiles and the Runer with base longitudinally to belts with a maximum width of 1,200 mm

Find out more

LVM000 “Turtle” Motorised Welder LVM000

Automatic hot-air welding apparatus, with automatic wind. - longitudinal overlap splices on conveyor […]

Find out more

LTU100V7 Semiautomatic cutting machine LTU100V7

Designed to cut the ends of belts for splicing in the form of serrated fingers. Working width: 1,370 mm

Find out more

Buckets for bulk products

These are used in elevators for bulk products such as cereals, fodder, oily grains, sugar etc., and […]

Find out more

LCU 215 Manual slitter LCU215

Designed for the longitudinal cutting of conveyor belts. Maximum belt width: 2,150 mm

Find out more