Watco Concrex Colours - Epoxy Repair Mortar

Industrial floors

Vote

“ Coloured epoxy repair mortar to blend in holes in coloured heavy traffic areas Virtually indestructible Blends with existing coloured floors Mix and apply in minutes So strong it can be feather-edged ”

Ask for a quote

Presentation

Concrex Colours is a coloured epoxy resin mortar for a better blend with a coloured floor than sand and cement or Watco Concrex®. The ideal choice for repairs to floors, steps and ramps for heavy traffic. It can also be used as a coloured screed to provide an attractive, virtually indestructible floor surface. Compared with other repair mortars this formulation is particularly rich in epoxy resin. This provides superior strength and adhesion, making it ideal for very thin section, feather edge or intricate repairs.

Recommended areas of use

Suitable for use inside and out
Concrete, sand and cement, metal
Holes in concrete floors
Damaged steps
Broken floor joints
Eroded, uneven concrete

Technical features

Impervious and non-dusting, chemical resistant and anti-slip, virtually indestructible, may be feather-edged. Suitable for: Concrete, sand & cement and metal. Interior and exterior Primer required: Watco Tack Coat is essential for shallow application, screeding, or if using on a damp surface. Composition: Finely graded sand pre-blended with resin. A 10kg unit includes 1 tin of colours curing agent, and a 25kg includes 2 tins of colours curing agent. Coverage: 10kg: 1.2m² at 5mm thick. 25kg: 3m² at 5mm thick. Application tools: Steel float or trowel. Curing time: 3-6 hours at 15°C - 20°C for light traffic. 8-12 hours at 15°C - 20°C for heavy traffic Minimum application temperature: 10°C Pot life: Up to 30 minutes.

Download the complete technical features

Opinion on the product