Watco Flowpatch Deep Fill - Concrete Hole Repair

Industrial floors

Vote

“ When you need a pourable repair for a deeper concrete hole For holes between 10-200mm Just add water, mix and pour Fibre reinforced for added strength Forklift traffic in just 2 hours ”

Ask for a quote

Presentation

Watco Flowpatch Deep Fill® is ideal for repairing or levelling deeper holes between 10-200mm in concrete flooring. Its very strong formula will harden quickly and will accept heavy traffic including forklifts only 2 hours after application.

Recommended areas of use

Ideal for filling deep holes between 10-200mm
For quick patch repair on concrete, use Watco Flowpatch®
For repairs to ramps, steps and for reforming edges, we recommend Watco Concrex®
For resurfacing or levelling larger areas of rough or tamped concrete, please use Watco Flowtop®

Features

Just add water, mix and pour
Can be applied to damp (not wet) concrete
Sets at low temperatures (down to 5°C)
Flowpatch Deep Fill® can be applied from 10mm to 200mm
Light grey, slip resistant finish
Odourless, non-toxic, non-hazardous formula
Fibre reinforced

Technical features

Quick setting, pourable patch repair for heavily trafficked floors, just add water, mix and pour, slip resistant finish, sets at low temperatures. Suitable for: Concrete Interior and exterior No primer required. Composition: Reinforced cement & polymer powder Coverage: Approximately 0.25m² at 50mm thick per 25kg Curing time: 1 hour at 15°C Minimum application temperature: 5°C

Download the complete technical features

Opinion on the product