Watco Polyaspartic Primer - For use with polyaspartic coatings

Products for the chemical treatment of surfaces

Vote

“ For use with Watco specialist polyaspartic coatings Primes and seals porous, dusty floors prior to painting Can be used at minus 10°C to 25°C Ready to overcoat in 4 hours Superior performance demonstrated by ISO testing to CE Mark EN1504-2 ”

Ask for a quote

Presentation

Watco Polyaspartic Primer is a unique, two part resin that has been specially designed prior to using Watco’s range of polyaspartic coatings. When applied by roller, Polyaspartic Primer primes and seals very porous or high suction surfaces, such as sand and cement screed, to ensure a uniform finish and help prevent air entrapment bubbles in the subsequent coating. Polyaspartic Primer cures quickly and can be overcoated in 4 hours. This product can also be beneficial when overcoating an existing, well-bonded paint before using a Watco Polyaspartic coating as a top coat.

Use with the following Watco products: Cold Set Coating, Fastcoat, Food Safe Coating, Protecta-Coat, Safety Coat Cold Cure and Safety Coat Food Safe.

Recommended areas of use

Production areas
Warehouses
Showrooms
Workshops
Loading bays
Cold stores, walk-in fridges and freezers
Interior and exterior

Features

Primes and seals porous, dusty floors prior to painting
Can be used at minus 10°C to 25°C
Ready to overcoat in 4 hours
Superior performance demonstrated by ISO testing to CE Mark EN1504-2

Technical features

Suitable for: Bare, porous concrete Finish: Clear. Interior and exterior Composition: 2 part polyaspartic resin Number of components: 2. Coverage: 20m² per 2.5L Mix ratio: 100 parts resin : 59 parts curing agent. Application tools: Microfibre roller. Cut in using a brush. Minimum application temperature: Minus 10°C Cleaning tools: It is not practical to clean applicators and they should be discarded after use.

Download the complete technical features

Opinion on the product