Watco Tack Coat Sub Zero - resin primer

Products for the chemical treatment of surfaces

Vote

“ A polyaspartic resin primer for use at low temperatures Use inside or out with Concrex Epoxy Floor Repair Mortar Helps with essential floor repairs during the winter months Suitable for chiller room floors Primer is ready for repair mortar in less than an hour ”

Ask for a quote

Presentation

Watco Tack Coat is an epoxy resin adhesive primer for use before screeding with Watco Concrex® or before using Watco Concrex® Vertical. Watco Tack Coat Sub Zero is available for repairs during cold conditions.

Recommended areas of use

Suitable for internal or external applications
Can be applied over existing paint, but all poorly bonded paint must be removed and well bonded paint roughened to provide a key

Features

Quick and easy to mix and apply
Watco Concrex® can be applied within 30 - 60 minutes
Watco Tack Coat Sub Zero cures in temperatures as low as -20°C

Technical features

Suitable for: Floors, walls, ramps, steps. Interior and exterior. Coverage: 3m². Number of coats: 1 Curing time: Watco Tack Coat should be sufficiently tacky to overlay after approximately 60 minutes at 15-20°C, but this will be extended to 3 hours at 5°C. Pot life: 20 minutes maximum at 20°C when decanted into a shallow tray. Higher temperatures will reduce the pot life.

Download the complete technical features

Opinion on the product