WATCO

PRODUCTS (80)
CATALOGUES
WHITE PAPERS
PRESS RELEASES

Watco Safety Coat Hygienic - non slip coating for areas where hygiene is important - WATCO

Quote Watco Safety Coat Hygienic - non slip coating for areas where hygiene is important

Watco Safety Coat Hygienic - non slip coating for areas where hygiene is important WATCO

Watco Safety Coat Hygienic - non slip coating for areas where hygiene is important

Epoxy paint

Vote

“ Heavy duty non slip coating for areas where hygiene is important Reinforced with diamond hard wax and ceramics Pre-blended aggregate for an even easy clean finish Fast curing – apply two coats in one day Easy clean, finely textured ”

Ask for a quote

Presentation

Watco Safety Coat has been re-formulated to produce a ‘Best in Class’ water based, anti slip epoxy resin.

This tough, easy to use coating now dries faster to reduce downtime and lasts longer to save recoating costs. The rapid drying formula also allows the application of 2 coats in one day. Our unique blend of the best resins available provide an attractive, low maintenance, hard wearing floor finish which lasts and lasts.

Safety Coat Hygienic incorporates Silver Ion technology and is ideal for areas where slip resistance, cleanliness and hygiene are as important as a hard wearing finish.

All grades now carry CE Mark EN1504-2 and have impressive test results for slip resistance, abrasion, scratch and impact resistance, as well as for adhesion, hardness and flexibility. They are also breathable, chemical resistant, safe for food production areas. The range carries an A+ VOC emissions rating with a low level of VOC.

All tests have been undertaken to ISO standard where applicable and demonstrated this ‘Best Ever Formulation’ to be 40% harder wearing than previously.

Recommended areas of use

Warehouse
Production Areas
Workshops
Showrooms
Potentially slippery, heavy wear areas

Technical features

Suitable for: Concrete, wood, existing well bonded paint Finish: Mid gloss, fine texture Primer required: Not usually. Use Watco Powerfloat Primer on very smooth surfaces. Composition: 2 part reinforced water based epoxy resin Number of components: 1 x curing agent and 1 x resin. Coverage: 30m² per 5L per coat Number of coats: 2 Mix ratio: 100 parts curing agent : 132 parts resin. Curing time: 12 hours at 20°C Minimum application temperature: 15°C

Download the complete technical features

Opinion on the product