Watco Safety Grip Cold Cure - Anti Slip Concrete Paint

Epoxy paint

Vote

“ Une peinture de sol époxy résistante à basse température Finition extrêmement antidérapante Parfait pour les zones réfrigérées Excellente résistance chimique Permet une utilisation tout au long de l'année ”

Ask for a quote

Presentation

Watco Safety Grip Cold Cure is a heavy duty, coarse textured, anti slip, two pack epoxy resin coatings designed to provide a safe surface both inside and out. Using one high build coat of Safety Grip minimises the risk of accidents throughout the workplace, particularly for wet or oily areas. All grades now carry CE Mark EN 1504-2 and have test results for slip resistance, abrasion, scratch and impact resistance, as well as for adhesion and hardness. They are also chemical resistant and have an A+ VOC emissions rating with a low level of VOC.

Watco Safety Grip Cold Cure can be applied as low as 0°C, providing exceptional slip resistance in unheated areas or outside in the winter months.

Recommended areas of use

Slippery, hazardous, wet or oily areas
Around machinery
Steps, ramps/ disabled ramps, foot bridges
Loading bays, walkways and entrance ways
Car parks
Around vibrating machinery (see Safety Grip Flex)

Technical features

Suitable for: Concrete well bonded paint, flat metal Finish: Glossy, coarse texture Interior and exterior Composition: 2 part, 100% solids epoxy resin Number of components: 1 x curing agent, 1 x resin and 1 x anti slip particles. Coverage: 5m² per unit Mix ratio: Up to 30 minutes at 20°C. Dry film thickness: Approximately 320 microns Curing time: 24 hours at 0°C Shelf life: 12 months in unopened containers.

Download the complete technical features

Opinion on the product