Clamping tools, Tightening tools

Offers from 1 to 52 of 1 353

Clamps according to SMS-DIN 304 SS

Find out more

The pipe holdershold the pipe firmly allowing it to slide temperature variation : - easy to install - no deformation of support - perfect guidance.

Make a request
Find out more

SES®-SC cable ties for cable trays

Find out more

• System for attachment trough the wall, with a blanking head wich covers hole both inside and outside of the chassis. • Dome head to facilitate the passage of the cables in the chassis. […]

Make a request
Find out more

Locking plugs nickel-plated brass Ex d IIC

Find out more

• Material: nickel-plated brass with O-ring made of NBR• Standard test: EN 60079-0/EN60079-1Cable glands for flameproof enclosure for higher temperature resistance are available upon request.ATEX […]

Make a request
Find out more

Locking rings suitable for cable glands Ex d IIC

Find out more

• Material: nickel-plated brass• Screws: stainless steel A2• Application of the locking rings: Additional safety against self-opening due to vibrations!

Make a request
Find out more

See all offers from SES-STERLING SA

Fixture Clamp with Fixed Jaw I 4.110

Find out more

Application The fixture clamps are used for machining of dimensionally stable workpieces in single or multiple clamping fixtures. Due to their compact design they can be arranged in a very limited […]

Make a request
Find out more

Fixture clamp with fixed jaw I 4.111

Find out more

Application The fixture clamps are used for machining of dimensionally stable workpieces in single or multiple clamping fixtures. Due to their compact design they can be arranged in a very limited […]

Make a request
Find out more

Wing hose clamp

Find out more

The Ear type hose clamp, manufactured by PREVOST, offers fast and easy installation. This device does not come loose. The steel construction makes it corrosion resistant and can not be damaged by […]

Make a request
Find out more

Solid hose clamp worm-drive

Find out more

These solid band worm drive clamps are developed by Prevost. They can be either made from 304 stainless steel or 316 stainless steel marine grade materials. They have a band with a size of 12 mm. In […]

Make a request
Find out more

Worm gear hose clamp for heavy loads

Find out more

The heavy duty clamp, manufactured by Prevost, is a clamp equipped with a screw high quality carbon steel and AISI 430 stainless steel structure. It has a maximum diameter that ranges from 239 up to […]

Make a request
Find out more

See all offers from PREVOST AIR COMPRIME

Captive screws - A2 stainless steel

Find out more

These two product references are available from diameter M4 to M12. Packed in box of 100 pieces – Screws are delivered with the appropriate washers Delivery time: depending on your location, […]

Make a request
Find out more

Captive Solutions 15F Series

Find out more

Max. tensile strength 1.30 N, working load 930 N. Quick opening and closing by a push of the finger. Easy installation with single hole mounting.

Make a request
Find out more

Captive Solutions 715F Series

Find out more

Max. tensile strength 700 N, working load 600 N. Easy and economic clip-in installation for stud and receptacle. Also suitable for automatic installation. 1/4 turn to open-close by a push of the […]

Make a request
Find out more

Captive Solutions 716F Series

Find out more

Max. tensile strength 1.400 N, working load 1.200 N. Easy and economic clip-in installation for stud and receptacle. Also suitable for automatic installation. 1/4 turn to open–close […]

Make a request
Find out more

See all offers from Arconic Fastening Systems and Rings

Mechanical joining : Self piercing nuts

Find out more

Mechanical joining : Self piercing nuts

Make a request
Find out more

Metric hex head plug (form B)

Find out more

MATERIALS - COLOURS STANDARD : • PE - LD. • Grey RAL 7035.

Make a request
Find out more

Shoulder washers

Find out more

Ideal for isolating different materials. Protects from dust, avoids corrosion and resists most chemicals.

Make a request
Find out more

Flat anti - loss washers

Find out more

Used for preliminary mounting of screws and bolts with no risk of loss. Allows ease of assembly. Vibrations are absorbed. Other dimensions on request.

Make a request
Find out more

See all offers from BÜLTE PLASTIQUES

Fixing adhesive STEGOFIX

Find out more

STEGOFIX is an appliance holder for direct fixing of small appliances and perforated 35mm DIN rails. With STEGOFIX small appliances can be mounted in switch cabinets significantly quicker, easier and […]

Make a request
Find out more

Washer head screw

Find out more

- Screws Quality class 12.9- Center and attach- Material: Hardened steel 33-38 HRc (oil-hardened)- Traction resistance 1220N/mm2- Shear strength 624N/mm2- Minimum elongation: 8%- Working temperature: […]

Make a request
Find out more

Precision Drill Press Vise

Find out more

1 horizontal v-slot and 3 vertical v-slots parallelism of jaws: 0.02 mm guide to base: 0.02 mm

Make a request
Find out more

Angle Vise 105 mm

Find out more

Rigid cast-iron construction Use metal, wood or plastic Ideal for right angle welding of parts Always joins at a 90° angle, either as butt corner joint, miter joint or T-connection Copper-plated […]

Make a request
Find out more

Angle vise 125 mm

Find out more

• Rigid cast-iron construction. • Use metal, wood or plastic. • Ideal for right angle welding of parts. • Always joins at a 90° angle, either as butt corner joint, miter joint […]

Make a request
Find out more

See all offers from KNUTH Werkzeugmaschinen GmbH

Washers and Circlips : Circlips - Pince pour Circlips Extérieurs Classic (arbres) avec Wiha MagicTips®

Find out more

Washers and Circlips : Circlips - Pince pour Circlips Extérieurs Classic (arbres) avec Wiha MagicTips®

Voir la fiche produit
Find out more

Washers and Circlips : Circlips - Pince pour Circlips Extérieurs Classic (arbres) avec Wiha MagicTips®

Find out more

Washers and Circlips : Circlips - Pince pour Circlips Extérieurs Classic (arbres) avec Wiha MagicTips®

Voir la fiche produit
Find out more

Washers and Circlips : Circlips - Pince pour Circlips Intérieurs Classic (alésages) avec Wiha MagicTips®

Find out more

Washers and Circlips : Circlips - Pince pour Circlips Intérieurs Classic (alésages) avec Wiha MagicTips®

Voir la fiche produit
Find out more

See all offers from CERGY-VIS

Accessories : Leveling Screws

Find out more

(with 2 screws and 2 washers) For series BNV and BNR. The size of the screws depends on the size of the mounting hole on the machine!

Make a request
Find out more

Accessories : Insulating washers for screw head isolation

Find out more

For screws with a diameter up to M 12 / M 20 / M 30 Outside diameter: 35 mm / 50 mm / 70 mm Hole diameter: 13 mm / 21 mm / 31 mm installation height: 20 mm / 21 mm / 25 mm Maximal pre-load force: 200 […]

Make a request
Find out more

Thread-rolling fastener for metals

Find out more

Using TAPTITE 2000® ensures that in metal-joining applications, you can eliminate work processes such as tapping and the use of additional fastening elements. The fastener is screwed straight into […]

Make a request
Find out more

Self-clinching screws RIVTEX® / STRUX®

Find out more

A non-detachable fastening for sheet metals can be produced at optimum cost by using self-clinching screws under the brand names of RIVTEX® (for sheet thicknesses between 0.75 and 2.00 mm) and […]

Make a request
Find out more

Direct screw fastening for sheet metals

Find out more

Using Sheetite® ensures that in metal-joining applications, you can eliminate work processes such as thread tapping, and also dispense with additional fastening elements. The fastener is screwed […]

Make a request
Find out more

See all offers from Arnold Umformtechnik GmbH & Co. KG

Precision Vice with Hydr. Amplification 30mm Clamping Width

Find out more

It is made of tool steel, hardened and precision ground. It includes one key bar with hydraulic amplification of the clamping force. It has a horizontally ground V-groove in the movable jaw.

Make a request
Find out more

Ball-screws MISUMI

Find out more

MISUMI offers a wide range of ball-screws. Our customers can choose between grinded and rolled ball-screws. MISUMI offers diameter from 8mm to 25mm and lead from 2mm to 40mm. Parameter like length and […]

Make a request
Find out more

Foot implants

Find out more

The Twist-off screw supports Weil’s operating technique for the reconstruction of hammer toes. Using a mandrel the screw is screwed through the osteotomy, with or without predrilling, and the […]

Make a request
Find out more

Standard

Find out more

Because of its optimal dimensions, the SR series keeps all the characteristics of the conventional series while offering additional advantages for installation and use: • Easier and safer […]

Make a request
Find out more

Self-locking

Find out more

This self-locking series corresponds in all points to the conventional series, the screw threads being locked by polygonal deformation of one or more turns of the thread. This deformation results in a […]

Make a request
Find out more

Drill chuck

Find out more

Designed ti minimize drill chuck rigidity and precision on machine centers with automatic tool changer. Combined as one body, so that the Drill Chuck will not be fallen out when heavy cutting is being […]

Make a request
Find out more

Arnold twin manual high pressure vises

Find out more

Specific features of the Arnold twin high pressure vise with hydraulic power booster: Manual clamping mechanism with hydraulic power booster.Arnold twin high pressure vises clamp two parts at the same […]

Make a request
Find out more

Manual high pressure vise

Find out more

Table and robust monobloc design virtually eliminates distortion (one-piece body and fixed jaw).The clamping mechanism type can be changed at any time as required.Any type of vise may be combined with […]

Make a request
Find out more

ARNOL mat manual high pressure hydraulic vises for machining centers

Find out more

Easy to remove movable jaw for cleaning of the vise body interior.Large selection of accessories available.All the vises have a serial number, and we keep records of all relevant measured dimensions […]

Make a request
Find out more

High pressure vises for milling and drilling machine

Find out more

-Depending on model, clamping forces of 4, 5, or 8 tons are obtained with little operator effort. -Stable and robust monobloc design virtually eliminates distortion (one-piece body and fixed jaw). […]

Make a request
Find out more

Clamping machine

Find out more

Centric and single vice in one. For conventional clamping, tight clamping for 5-sided machining, shaped- and moulded parts or other raw material.

Make a request
Find out more

Gripos® with standard reversible jaws

Find out more

Standard reversible jaws with triple application - protectively smooth - or ribbed - an extensive assortment of jaws with M8 thread

Make a request
Find out more

Machine tool vise gripos VS with combi reversible jaws

Find out more

- provided with combi-reversable jaws for greater clamping widths - an extensive assortment of jaws with M8 thread - only for use with press-down spring-leaves

Make a request
Find out more

Conversion kit for duogrip-4-fold linear

Find out more

Clamp four work-pieces in a single line with only one rotating movement of a lever.

Make a request
Find out more

gripos - 5A

Find out more

Genuine 5-face processing is possible. Clamping between tall support jaws provides the work-pieces with completely free spindle room for 5-face processing.

Make a request
Find out more

Bench vise PS

Find out more

Opening backwards, with or without integrated C-clamp fixture. Of special cast iron, with prism guide, steel quill, covered spindle and case hardened jaws.

Make a request
Find out more

Drilling machine vice escopos

Find out more

Easy to handle, universally applicable. Extensive clamp-width range. Jaws with shoulders, horizontal and vertical recesses for work-pieces of all shapes.

Make a request
Find out more

Gripos® - the modular system

Find out more

Regardless of whether the work-pieces are hard or soft, have a cubic or irregular shape, whether processing is carried out on single units or over a series, fully automatically or manually, the […]

Make a request
Find out more

Black Steel Universal Car Roof Basket

Find out more

Ce panier de toit est conçue pour s'adapter aux différentes tailles de voitures, vans et SUV; il a une capacité maximale de 100 kg. Ce produit est équipé de barreaux ajustables permettant de stocker […]

Make a request
Find out more

Collar Weld Stub ISO160

Find out more

When you buy flange fittings from Edwards, you can expect the service that only a leading international supplier can offer you.  Whether you are an OEM (needing scheduled deliveries of component […]

Make a request
Find out more

ISO160 Rotatable Flange Pack Mild Steel

Find out more

When you buy flange fittings from Edwards, you can expect the service that only a leading international supplier can offer you.  Whether you are an OEM (needing scheduled deliveries of component […]

Make a request
Find out more

NW25 Clamping Ring Stainless Steel

Find out more

When you buy fittings from Edwards, you can expect the service that only a leading international supplier can offer you.  Whether you are an OEM (needing scheduled deliveries of component kits […]

Make a request
Find out more