EZ protecting varnish can be applied with a spray gun or a brush. Use the very soft brush in the lid to avoid mechanical damage of SES-MARKERS printing.
It is not to be used in the proximity of fire or an incandescent source, and working premises must be well ventilated.
All safety regulations relative to solvent containing lacquers or flammable liquids are to be respected when using EZ protective varnish.
SES-MARKERS protective varnish:
The film remaining after the solvents of the varnish have evaporated offers high adhesion, is odourless, flexible and perfectly transparent. It offers very good resistance to abrasion, heat, light and damp.
EZ varnish protects SES-MARKERS strips from dirt
Protective varnish SES-LACK :
Especially conceived in respect of the safety requirements of the users
(directive 67/548/CE and decree CMR 2001-37)
This varnish, the formulation of which was especially established using solvents not poisons, brings to SES-MARKERS marker cards a completely transparent over-protection. It leaves a film, not yellowing, which is not scaled and does not crack.
It prevents corrosion, and provides an additional protection with respect to the harmful atmospheric agents (moisture, salt spray).
Especially formulated in respect of the directives on the dangerous products, the SESLACK varnish can be used safely, in accordance with the requirements of safety standard relating to the use of lacquers or flammable liquids (refer to safety data card).
All you need to run your factory !
