The base frame is designed as a working table. Below the table plate there is the electric control that controls the electrical press-in cylinder at the portal. The steel base plate of the portal frame is installed flush with the table plate in the working table, so that the working surface is plane and edges are avoided. On the base plate any workpiece carriers such as sliding tables can be mounted. The piston rod of the press-in cylinder is equipped with a quick-changing device, at which the press-in tools can be mounted. This can optionally be replaced by other tool holders. Thanks to the modular design, the functions of the control as well as mechanical components can be easily exchanged or retrofitted. The stroke measurement is made by the evaluation of the integrated rotary encoder. The force measurement (control variant 2) is made indirectly by a strain sensor at the pressin frame.
These press-in devices are preferably used in assembly processes for the production of longitudinal pressed joints, riveted joints as well as for pressing out and testing of components