Peripheral devices

Offers from 1 to 52 of 136

Thermal transfer/direct thermal printers

Find out more

The TOSHIBA TEC B-SX4 & B-SX5 thermal transfer / direct thermal printers extend the tradition of technical innovation of the TOSHIBA TEC high-class industrial printers. Built to succeed the very […]

Make a request
Find out more

Thermal transfer printers

Find out more

The TOSHIBA TEC B-SX4 and B-SX5 thermal transfer / direct thermal printers extend the tradition of technical innovation of the TOSHIBA TEC high-class industrial printers. Built to succeed the very […]

Make a request
Find out more

Printer P 260

Find out more

Our large wide of printers is especially adapted to your weighing instrument. The P 260 printer is a dot matrix printer with rewinder AW3. The P 260 dot matrix printer has been designed for weighing […]

Make a request
Find out more

External Hard Disk

Find out more

Plug this hard drive into your computer for additional capacity instantly. Stylish and robust, it gives you extra capacity to store and safeguard your valuable data. Enjoy the high transfer speed and […]

Make a request
Find out more

External Hard Disk

Find out more

Plug this hard drive into your computer for additional capacity instantly. Stylish and robust, it gives you extra capacity to store and safeguard your valuable data. Enjoy the high transfer speed and […]

Make a request
Find out more

printer for passenger ticketing

Find out more

The IER 506 is an ideal solution for check-in applications. Flexible, it handles many different paper types (including thin paper) and can print any type of 1D or 2D barcode as well as logos for 2D […]

Make a request
Find out more

printer for passenger ticketing

Find out more

Fast, integrated IP connectivityVery high speed printing in direct thermal and thermal transfer1D and 2D barcode printing capabilityUnique escrow device version for self-service kiosksAEA 2001 SSD […]

Make a request
Find out more

M54 - DC Motor Controller

Find out more

The M54 is a motor controller that is suited for all types of motors that have a ±10V DC control input and that can provide a position feedback information using an incremental encoder (e.g. servo […]

Make a request
Find out more

M50 - Synchro/Resolver Converter

Find out more

The M50 is a 1-channel, continuous-tracking synchro- or resolver-to-digital converter with a configurable 10 to 16-bit resolution and a tracking rate of up to 1040rps. The M-Module™ has a reference […]

Make a request
Find out more

M72 - Motion Counter

Find out more

The M72 M-Module™ is a timer, counter and comparator with four 32-bit counter units. The four counters work independently in several modes, e.g. counting decoder signals or measuring frequencies. Each […]

Make a request
Find out more

M47 - SSI Controller

Find out more

The M47 is a Serial Synchronous Interface M-Module™ for connection of up to four sensors to optically isolated SSI outputs. Serial synchronous interfaces are commonly used for many kinds of sensors […]

Make a request
Find out more

M199 - USM™ Main M-Module

Find out more

USM™ Universal Submodules make M-Modules™ more flexible than ever. The main M-Module™ M199 gets its specific function through the IP cores implemented inside its onboard FPGA. This function can be […]

Make a request
Find out more

M16 - 4-Channel Data Acquisition

Find out more

The M16 is an analog data acquisition M-Module™ with four differential inputs and a resolution of 12 bits. The analog part is optically isolated from the system.All four channels can be sampled […]

Make a request
Find out more

M8 - IEC Bus Controller

Find out more

The M8 is a standard interface to peripheral devices with IEC625 or IEEE488 interfaces. Due to the NAT9914 GPIB controller up to 15 connected peripheral devices can be polled in parallel or serial […]

Make a request
Find out more

M97 - Universal Counter

Find out more

The M97 is based on the M-Module™ ANSI mezzanine standard. It can be used as an I/O extension in any type of bus system, i.e. CPCI, VME or on any type of stand-alone SBC. Appropriate M-Module™ carrier […]

Make a request
Find out more

M76 - Digital Multimeter

Find out more

The M76 M-Module™ is a digital system multimeter M-Module™ for acquisition of DC and AC voltage, DC and AC current and resistance through 2- or 4-wire measurement. It is an advanced, more compact […]

Make a request
Find out more

M70 - Temperature Acquisition

Find out more

The M70 is a DSP-based M-Module™ for acquisition of temperature values using PT100/PT1000 resistance temperature detectors or thermocouples.The M70 automatically recognizes the connected sensor type […]

Make a request
Find out more

M68 - 4-Channel Function & Waveform Generator

Find out more

The M68 is a DSP-based, four-channel, analog signal output M-Module™ with 16-bit resolution. The minimum and maximum values for each output are individually configurable through software. Internal RAM […]

Make a request
Find out more

M67 - 1-Channel Digital Oscilloscope

Find out more

The M67 is a board for acquisition of analog signals with a bandwidth of up to 10MHz at a maximum resolution of 12 bits and a sampling frequency of up to 40MHz. Variable trigger functions allow […]

Make a request
Find out more

M63 - 32-/16-Bit Binary Data Acquisition/Generation

Find out more

The M63 is a DSP-based digital M-Module™. It provides a total of 32 I/O lines, 16 of which are input lines and 16 are input or output lines. This makes two optically isolated groups: one 16-bit input […]

Make a request
Find out more

M59 - 4-Channel Data Acquisition

Find out more

The M59 M-Module™ is a DSP-based 4-channel data acquisition M-Module™ with 16 bits resolution. The measuring ranges are software-configurable up to a maximum of ±10V. Both AC or DC coupling of the […]

Make a request
Find out more

M56 - 16-Channel Analog Multiplexer

Find out more

The M56 M-Module™ has 16 relay channels with throw-over contacts. It is a switching matrix for measuring signals with different voltage levels and different ground references.The powerless-switching […]

Make a request
Find out more

M78 - 4-Channel Digital Oscilloscope

Find out more

The M78 is an M-Module™ for acquisition of up to four analog and eight digital signals with a wide bandwidth at a maximum resolution of 12 bits and a sampling rate of up to 50 MS/s. A local 16 MB RAM […]

Make a request
Find out more

M199 - USM™ Main M-Module

Find out more

USM™ Universal Submodules make M-Modules™ more flexible than ever. The main M-Module™ M199 gets its specific function through the IP cores implemented inside its onboard FPGA. This function can be […]

Make a request
Find out more

M24 - 8/16 Binary Inputs

Find out more

The M24 has voltage-sensitive inputs. Either 16 channels are available using a 25-pin D-Sub connector, or 8 channels using a screw terminal with LED display. The nominal switching threshold is half […]

Make a request
Find out more

M22 - 8 Binary Inputs/Outputs

Find out more

The M22 uses intelligent power switches to control a load of 2A per channel. The output state is detected and can be read back. This way, a deactivated output can also be used as an input.When an […]

Make a request
Find out more

M82 - 16 Binary Inputs

Find out more

The M82 is a 16-channel fully isolated input M-Module™ with latching and comparator capabilities for industrial applications. A current limit for each input guarantees an input voltage range of 0 to […]

Make a request
Find out more

M81 - 16 Binary Outputs

Find out more

The M81 is a 16-channel fully isolated, fully protected binary output M-Module™ for industrial applications. The outputs can switch DC as well as AC voltages and can also be used for analog signals. […]

Make a request
Find out more

M66 - 32 Binary Inputs/Outputs

Find out more

The M66 provides 32 binary process signals on one single M-Module™, which is the largest number of binary channels ever seen on a mezzanine board. This allows a total of 128 signals with four […]

Make a request
Find out more

M58 - 32-bit TTL I/O Interface

Find out more

The M58 TTL I/O M-Module™ is used for fast and trouble-free transmission of binary signals. It is organized in four 8-bit groups, where each group can be programmed as an input or output. Every group […]

Make a request
Find out more

M43 - 8 Relay Outputs

Find out more

The M43 is a relay output M-Module™ for free potential switching of eight signals. It is designed for industrial process I/O applications.The relays implemented guarantee highest reliability and long […]

Make a request
Find out more

M32 - 16 Binary Inputs

Find out more

The M32 is a 16-bit binary input M-Module™ with latching and comparator capabilities for industrial applications. The inputs are optically isolated with a high isolation voltage of 500V DC.A current […]

Make a request
Find out more

M31 - 16 Binary Inputs

Find out more

The M31 is a 16-bit binary input M-Module™ with latching and comparator capabilities for industrial applications. The inputs are optically isolated with a high isolation voltage of 500V DC.A current […]

Make a request
Find out more

M28 - 16 Binary Outputs

Find out more

The M28 with its open-emitter outputs can be used in process I/O applications (cf. M27 with open-collector outputs). If there are currents of above 500mA an intelligent power switch guarantees that […]

Make a request
Find out more

M27 - 16 Binary Outputs

Find out more

The M27 with its open-collector outputs can be used in process I/O applications (cf. M28 with open-emitter outputs). If there are currents of above 500mA an intelligent power switch guarantees that […]

Make a request
Find out more

M11 - 16-bit TTL I/O Interface

Find out more

The M11 is a TTL I/O M-Module™ with 16 lines (Ports A and B) that can be used separately as two ports with 8 bits each or together as a 16-bit port. Control of the I/O lines is via the four handshake […]

Make a request
Find out more

M199 - USM™ Main M-Module

Find out more

USM™ Universal Submodules make M-Modules™ more flexible than ever. The main M-Module™ M199 gets its specific function through the IP cores implemented inside its onboard FPGA. This function can be […]

Make a request
Find out more

M16 - 4-Channel Data Acquisition

Find out more

The M16 is an analog data acquisition M-Module™ with four differential inputs and a resolution of 12 bits. The analog part is optically isolated from the system.All four channels can be sampled […]

Make a request
Find out more

M68 - 4-Channel Function & Waveform Generator

Find out more

The M68 is a DSP-based, four-channel, analog signal output M-Module™ with 16-bit resolution. The minimum and maximum values for each output are individually configurable through software. Internal RAM […]

Make a request
Find out more

M59 - 4-Channel Data Acquisition

Find out more

The M59 M-Module™ is a DSP-based 4-channel data acquisition M-Module™ with 16 bits resolution. The measuring ranges are software-configurable up to a maximum of ±10V. Both AC or DC coupling of the […]

Make a request
Find out more

M35N - 8/16 Analog Inputs, 14 Bits

Find out more

The M35N is a 14-bit analog M-Module™ for a wide range of standard input requirements such as 16 channels single-ended voltage or current and 8 channels differential voltage or current. The isolated […]

Make a request
Find out more

M33 - 8 Analog Outputs

Find out more

The M33 is a highly flexible M-Module™ for analog output signals. The isolated supply voltages can be generated by an on-board DC/DC converter. The output voltage range can be set to 0..10V, -5..+5V […]

Make a request
Find out more

M37N - 4 Analog Outputs, 16 Bits

Find out more

The M37N is a high-precision M-Module™ with four analog voltage, or alternatively current output channels for very fast signals. The output voltage range for each channel is -10 to +10V. The current […]

Make a request
Find out more

M36N - 8/16 Analog Inputs, 16 Bits

Find out more

The M36N is a 16-bit analog M-Module™ for a wide range of standard input requirements such as 16 channels single-ended voltage or current and 8 channels differential voltage or current. The isolated […]

Make a request
Find out more

M199 - USM™ Main M-Module™

Find out more

USM™ Universal Submodules make M-Modules™ more flexible than ever. The main M-Module™ M199 gets its specific function through the IP cores implemented inside its onboard FPGA. This function can be […]

Make a request
Find out more

M62N - 16 Analog Outputs

Find out more

The M62N is an analog output device with as many as 16 channels on one single M-Module™. The isolated supply voltages are generated by an on-board DC/DC converter. The output voltage range is […]

Make a request
Find out more

PU6 - 3U 8HP PSU for 19" systems, 14.4-33.6V

Find out more

The PU6 is a plug-in power supply unit for 19 systems (e.g. VMEbus, CompactPCI®) and is especially designed for computer systems in public transport vehicles, being fully compliant with EN […]

Make a request
Find out more

PU5 - 3U 8HP PSU for 19" systems, 66-154V

Find out more

The PU5 is a plug-in power supply unit for 19 systems (e.g. VMEbus, CompactPCI®) and is especially designed for computer systems in public transport vehicles, being fully compliant with EN […]

Make a request
Find out more

PU4 - 3U 8HP PSU for 19" systems, 110V

Find out more

The PU4 3U 8HP power supply unit is a plug-in device for 19 systems (e.g. VMEbus, CompactPCI®) and is especially designed for railway computer systems, being fully compliant with EN 50155.The PSU […]

Make a request
Find out more

PU3 - 3U 8HP PSU for 19" systems, 36V

Find out more

The PU3 3U 8HP power supply unit is a plug-in device for 19 systems (e.g. VMEbus, CompactPCI®) and is especially designed for railway computer systems, being fully compliant with EN 50155.The PSU […]

Make a request
Find out more

PU2 - 3U 8HP PSU for 19" systems, 24V

Find out more

The PU2 3U 8HP power supply unit is a plug-in device for 19 systems (e.g. VMEbus, CompactPCI®) and is especially designed for computer systems in public transport vehicles, being fully compliant with […]

Make a request
Find out more

PU1 - 3U 12HP PSU for 19" systems, 110V

Find out more

The 3U 12HP power supply unit PU1 is a plug-in device for 19 systems (e.g. VMEbus, CompactPCI®) and is especially designed for railway computer systems, being fully compliant with EN 50155. The […]

Make a request
Find out more