Surface-treatment tools

Offers from 1 to 52 of 258

Hot paint stripping - Ultrasonic - 51

Find out more

Type of product: Hot paint stripping Characteristics: When warm, it has unique stripping properties for synthetic resins, primers, baked paints, powder paints, water-based paints and very resistant […]

Make a request
Find out more

Ultrasonic - D100W - Stripper

Find out more

Aluminium and alloy stripper designed for stripping paint and organic contaminants with a strong adherence to any metallic substrate. To strip synthetic resins, primers, baked paints, powder paints, […]

Make a request
Find out more

Stripper - Ultrasonic - 54

Find out more

Type of product: Stripper. Characteristics: When warm, it presents a high stripping power on synthetic resins, baked paints, primers, water-based paints and cataphoretic paints. Suitable for: Iron. […]

Make a request
Find out more

See all offers from TIERRATECH SARL

PREPDECK

Find out more

Strips old finishes from exterior woods including 100% acrylics. Reduces mill glaze on new wood. Improves penetration of finishes on new wood. Removes grade stamps. Cleans weathered wood. Can be used […]

Make a request
Find out more

AQUATROL

Find out more

Can be used on horizontal or vertical surfaces. Waterbased gel for outdoor wood. Easy to use. Impregnates, isolates and protects wood against weathering. Non film forming – can be touched up […]

Make a request
Find out more

TEAK-OLJE

Find out more

Protects and nourishes the wood. Manitains and enhances the woods natural beauty. Natural rich matt finish. Will not blacken due to UV rays  

Make a request
Find out more

See all offers from GROUPE DURIEU

Oils V-Lube 205 litres

Find out more

The V-Lube range of oils offer good thermal stability and oxidation resistance and have been selected for use with the Stokes range of vacuum pumps. Suitable for use with Microvac […]

Make a request
Find out more

Ultragrade Oil : 205 litres

Find out more

Edwards offers a range of new oils, Ultragrade® 15, 19, 20 and 70, which result from a new process. Most manufacturers use a solvent refining process, whereas these oils are produced by a unique […]

Make a request
Find out more

Perfluoropolyether Oils : FOMBLIN® Y VAC 06/6 100 ml

Find out more

Edwards now offers an extended range of Fomblin® perfluoropolyether oils for use in rotary vacuum pumps. Fomblin® YVAC 06/6 is recommended for Edwards oil sealed rotary pumps and are […]

Make a request
Find out more

See all offers from EDWARDS SAS

Lubricant for sleeves HELAVIA® and SILAVIA : LUB2

Find out more

- Material : made of vaseline oil - Taste (+25°C) : without - Specifications : special SES-STERLING product for an easier application of HELAVIA and SILAVIA sleeves. It does not affect elastomers […]

Make a request
Find out more

Powder Coatings

Find out more

Powdermate additives are used in primers, color coats, and top coats, in both interior and exterior applications and are suited for use in both thermal and Ultra-Violet (UV)/Electron Beam (EB) cured […]

Make a request
Find out more

Anticorrosive cured epoxy : HEMPADUR 47182

Find out more

HEMPADUR 47182 is an anticorrosive two-component, modified polyamide adduct cured epoxy. Recommended use : For atmospheric and immersion service used as a "tiecoat" between epoxy and […]

Make a request
Find out more

Silicone based product: HEMPASIL NEXUS 27302

Find out more

HEMPASIL NEXUS 27302 is a high solid three component silicone based product. Recommended use: As a tiecoat for the HEMPASIL FOULING RELEASE System, securing adhesion between the anticorrosive system […]

Make a request
Find out more

Tiecoat: HEMPASIL NEXUS 27310

Find out more

HEMPASIL NEXUS 27310 is a three component silicone based tiecoat. Recommended use: As a tiecoat for the HEMPAGUARD® / HEMPASIL System, securing adhesion between the anticorrosive system and the […]

Make a request
Find out more

See all offers from HEMPEL PEINTURES FRANCE

Grenat

Find out more

Main applications : Abrasives.

Make a request
Find out more

Oil extractors

Find out more

FeaturesThe SIEBEC H50 oil extractor consists of:• a Polypropylene filter body fitted with a fast-opening lid • a removable Polypropylene micro-fibre container (capacity 11.5 litres)• an automatically […]

Make a request
Find out more

Produits Techniques de Maintenance : Huiles de Coupe - Huile de Coupe pour tous Métaux Néolube HC 2000 en Aerosol de 650ML

Find out more

Produits Techniques de Maintenance : Huiles de Coupe - Huile de Coupe pour tous Métaux Néolube HC 2000 en Aerosol de 650ML

Voir la fiche produit
Find out more

Oils and greases

Find out more

NTN-SNR offers a set of lubricants specifically designed for various bearing applications. The choice of lubricant, method of lubrication, the exact quantity to introduce into the bearing and the […]

Make a request
Find out more

Ceramic Media

Find out more

Required finishing results, machine size and the weight of the treated parts, are important aspects in choosing the right media composition and size to achieve the optimum process. Different types of […]

Make a request
Find out more

Plastic Media

Find out more

Plastic medias are generally used for a more gentle treatment of parts. The specific gravity, and therefore the bulk weight of plastic media, is almost half that of ceramic media. Our […]

Make a request
Find out more

Seals and low-friction coatings

Find out more

Base surfaces Standard surfaces can be applied at our in-house electro-plating unit. We also make use of a network of outstanding industry partners able to apply the best surface for every […]

Make a request
Find out more

Stripper - Ultrasonic - 53

Find out more

Type of product: Stripper. Characteristics: Hot steel stripper (between 80 - 90ºC) to strip synthetic resins, primers, baked paints, powder paints, water-based paints and even cataphoretic and […]

Make a request
Find out more

Stripper - Ultrasonic - PRO

Find out more

  Type of product: Stripper Characteristics: A stripping gel for stainless steel indicated to clean austenitic stainless steel and very strong alloy steel based on nickel and chrome. A subsequent […]

Make a request
Find out more

Ultrasonic - 7 Degreaser

Find out more

Cleaning and descaling of cinders. To achieve these results, this product must be used in combination with Ultrasonic-A. Here is the range of cleaning products you can find at Tierra Tech® […]

Make a request
Find out more

Degreaser - Ultrasonic - 17

Find out more

Type of product: Degreaser. Characteristics: Alkaline based degreaser. Highly concentrated, developed to clean very dirty steel and light metal components (spare parts). Suitable for: Iron. Dosage: 8 […]

Make a request
Find out more

Degreaser and decarboniser - Ultrasonic - 20

Find out more

Type of product: Degreaser and decarboniser. Characteristics: High degreasing cleaner. Its carefully selected surfactants facilitate the penetration of the product into the dirt. Specially formulated […]

Make a request
Find out more

Degreaser - Ultrasonic - 22

Find out more

Type of product: Degreaser. Characteristics: The strongest alkaline degreaser for ferrous metals. Suitable for: Ferrous materials. Dosage: 3-5% Colour: White Appearance: Dust

Make a request
Find out more

Degreaser and decarboniser - Ultrasonic - 23

Find out more

Type of product: Alkaline descaler and degreaser.. Characteristics: alkaline degreaser, formulated with a balanced formulation of surfactants, complexing additives and alkalins, which give it […]

Make a request
Find out more

Degreaser - Ultrasonic - MP

Find out more

Type of product: Degreaser. Very powerful degreaser indicated to remove oils and animal and vegetable fat. Indicated as a degreasing detergent for food circuits, pasteurisers and recirculation […]

Make a request
Find out more

Degreaser - Ultrasonic - 4

Find out more

Type of product: Degreaser. Characteristics: Removes encrusted grease sediments, oils and all kinds of dirt difficult to remove, preventing it from setting on clean parts again. Suitable for: […]

Make a request
Find out more

Degreaser - Ultrasonic - 2

Find out more

Type of product: Degreaser. Characteristics: Detergent for iron and carbon steel. Removes encrusted grease sediments, oils and all kinds of dirt difficult to remove, preventing it from setting on […]

Make a request
Find out more

Degreaser - Ultrasonic - 5P

Find out more

Type of product: Degreaser. Characteristics: Cleaning and descaling of grease, oils and any type of tough dirt, preventing it from setting on clean parts again. Suitable for: All types of materials […]

Make a request
Find out more

Degreaser - Ultrasonic - 6

Find out more

Type of product: Degreaser. Characteristics: Ink and light acrylic paint stripping. Ideal to remove grease and oils from any type of surface. Suitable for: All kinds of surfaces Dosage: 2-5% Colour: […]

Make a request
Find out more

Edwards 45 Oil : 12 x 1 litre

Find out more

Edwards supplies the widest range of oils of different viscosities and specifications to enable customers to obtain the best performance from mechanical pumps under different application conditions. […]

Make a request
Find out more

Edwards TW Mineral Oil 1 litre

Find out more

Edwards TW has been developed for applications where rotary pump oils are likely to be exposed to reactive or corrosive gases. The oil is distilled hydrocarbon containing no additives, but unsaturates […]

Make a request
Find out more

Fomblin® vacuum grease AR555 grade syringe 100 g

Find out more

This grease is an excellent lubricant for sliding elastomer seals, and exhibits the chemical inertness typical of the Fomblin® range.   It has a very low vapour pressure and is suitable for […]

Make a request
Find out more

Apiezon Greases 25 g

Find out more

A range of Apiezon® greases is offered for use on high vacuum systems and for many general applications in the laboratory. The high purity greases are non-toxic, are easy to apply and clean off […]

Make a request
Find out more

Sealing compounds 20 x 25 g

Find out more

Apiezon® wax W is a low vapour pressure wax for sealing joints in high vacuum systems. This wax softens at 80-90°C and has a vapour pressure at 180°C of 10-3 mbar and at 20°C of 10-8 […]

Make a request
Find out more

Silicone Grease - tube 50 g

Find out more

A high vacuum grade grease, which is for use at system pressures lower than 10-6 mbar.

Make a request
Find out more

Krytox Grease 226 g 8 oz

Find out more

DuPont Krytox® fluorinated greases are a family of multipurpose lubricants intended for use in speciality applications at elevated temperatures or in aggressive environments.

Make a request
Find out more

AP201 Vapor Booster Pump Fluid 200 litre

Find out more

Apiezon® AP201 is a hydrocarbon fluid prepared by molecular distillation and protected against oxidation by a thermally stable additive of matched vapour pressure. It has an auto ignition […]

Make a request
Find out more

Anti-seizing

Find out more

The seizing phenomenon intervenes in various situations : - Seizing whilst screwing when a threaded part is installed - Fretting corrosion under vibration contrainsts - Contact rust in severe […]

Make a request
Find out more

SYNTHETIC GREASE FOR LOW TEMPERATURES : GRAISSE 3701

Find out more

Low temperature synthetic grease suitable for accidental contact with food products. Insoluble in water and steam. Exceptional ageing resistance. Non-Food Compounds Program Listed H1 Registration: […]

Make a request
Find out more

GREEN STICKY MARINE GREASE FOR WET CONDITIONS : GRAISSE 3790

Find out more

A highly adhesive grease, very stringy, anti-wear, remarkable resistance to water, steam, salt water, salt spray etc. Green colour

Make a request
Find out more

INFUSIBLE HIGH TEMPERATURE SYNTHETIC GREASE : GRAISSE 3800

Find out more

High temperature synthetic grease. Does not run. Beige colour.

Make a request
Find out more

HIGH TEMPERATURE AND EXTREME PRESSURE STICKY GREASE : LCH 250

Find out more

Very high performance grease. Extreme pressure. High temperature. Withstands water, even under pressure. Green colour.

Make a request
Find out more

MULTIPURPOSE MOLYBDENUM DISULPHIDE GREASE : MO/3

Find out more

Molybdenum disulphide, extreme pressure grease with very high anti-wear stability, enabling intervals between greasing to be extended and increasing the service life of the mechanisms. Black colour.

Make a request
Find out more

GEAR AND CABLE GREASE AEROSOL : OPEN GEAR DTZ

Find out more

Extreme pressure mixture containing a high percentage of molybdenum disulphide. Very high adhesion with highly effective protection of the lubricated equipment; insoluble in water.

Make a request
Find out more

HIGH TEMPERATURE ALUMINIUM ASSEMBLY COMPOUND : GRIPCOTT NF

Find out more

A silver assembly compound designed to enable assembly and provide protection in extreme conditions of temperature and chemical or atmospheric corrosion of mechanical parts that are static or […]

Make a request
Find out more

BITUMEN AND TAR REMOVAL CLEANING AND DEGREASING AGENT : KLBIO

Find out more

Bitumen and tar removal cleaning and degreasing agent An emulsifiable degreasing agent developed to replace petroleum-based solvents. KL BIO can be used undiluted and rinsed off with water. VOC-free […]

Make a request
Find out more

CLEANER AND DEOXIDANT FOR ELECTRICAL CONTACTS – CAN BE USED ON LIVE CIRCUITS : CONTACTOL DTZ

Find out more

A non-flammable cleaner–deoxidant for electrical and electronic circuits Can be used on live circuits.

Make a request
Find out more

SAFE COLD DEGREASING AGENT : KL 111

Find out more

Guaranteed chlorine-free, HCFC-free and ethylene-glycol free. Cleans and degreases all mechanical parts. It is specially formulated for spray application, notably because of its low odour.

Make a request
Find out more