Conveyors

New range of conveyors

Find out more

A revolution for light load handling Smart, scalable, quick to install and connect, high performance from an energy point of view… the conveyor is taking a great step forward with Savoye. The […]

Make a request
Find out more

The loading module permits loading of the lead frames via a magazine. The process is monitored by sensors. The lead frames are fed to the belt conveyor successively at regular intervals, and as soon […]

Make a request
Find out more

Pallet sorting out

Find out more

The line of pallets sorting out is made to destack, sort out and stack empty pallets.

Make a request
Find out more

5,000 lbs Capacity Conveyor

Find out more

¼ thick side rails All rollers driven roller to roller with #40 chain Maintenance free cast iron housing sealed bearings Adjustable structural steel leg assemblies Interchangeable feet […]

Make a request
Find out more

Steel belt and drag conveyors for transporting material

Find out more

Chip conveyors are used to provide a constant and even flow of material needed to maximize the processing capabilities of the system. Our conveyors are made of robust construction and are […]

Make a request
Find out more

Chain conveyor

Find out more

Chain conveyor to handle multiformat pallets.

Make a request
Find out more

Chip conveyor

Find out more

Continuous transport and evacuation of short and broken chips, as they are produced when operating machine tools. The Chip Conveyor can be used in dry as well as in wet working processes. Function: […]

Make a request
Find out more

POLER SERIES Conveyor belts

Find out more

Thermoplastic polyester belts, physiologically neutral (non-toxic) for food conveyance, and non-synthetic organic products. They work extremely well at high temperatures, and are highly […]

Make a request
Find out more

Conveyor belt KERAM SERIES

Find out more

Thick belts made of extra hard PVC or PU, with two plies, the top one a monoply fabric with a non linear weave and compacted warp that prevents its disruption in case of being cut. They are specially […]

Make a request
Find out more

Pallet lift

Find out more

Innovative solutions for heavy load handling.Type: W-PH1-500.Load capacity: 500 kg. Load center: 600 mm.Closed height: 1200 mm.

Make a request
Find out more

Motorized Conveyors

Find out more

90 DEGREES BOX DIVERTER D90This is a motorized conveyor with 48 mm. diam. Rollers. These rollers are clutched, they stop if a box, on them that can not proceed and it will start again once the […]

Make a request
Find out more

Flexi Extandable Conveyors

Find out more

Four different widths: 400 - 500 - 650 – 800 mm Modular basis, minimum module number two pieces “/2”. Every module is 0,5 m. completely closed and 1,5 m extended “/2” is 1 m. closed - 3 […]

Make a request
Find out more

MSR Magnetic Separating Belt

Find out more

The MSR magnetic separating belt from OTEC is a system designed to reliably separate ferromagnetic workpieces from the abrasive media.Unlike conventional magnetic barrel separators, the MSR system has […]

Make a request
Find out more

Transfer gate WEE for TB-105

Find out more

The transfer gate WEE is used to distribute workpiece holders from one conveyor to two conveyors (inward transfer gate) or from two conveyors to one conveyor (outward transfer gate).At the inward end, […]

Make a request
Find out more

Indexing device IVE complete

Find out more

The indexing device IVE is used for assembly and process tasks which require excellent workpiece positioning accuracy.In the indexing device, the workpiece holder WTE is positioned with a […]

Make a request
Find out more

Belt coupling BKE-105 for TB/TB

Find out more

The belt coupling BKE is used for coupling a double-belt conveyor TBD to a single-belt conveyor TBE, for example for use as a positioning unit PVE. Force transmission from conveyor to conveyor is by […]

Make a request
Find out more

Drive unit for BPBE-105 compl

Find out more

The bypass belt permits the installation of two parallel conveying sections with only one drive unit. The distance between the two conveyor belts is 12 mm. Consequently, the inward and outward […]

Make a request
Find out more

Bypass BPE right without drive for TB-105

Find out more

The two-part bypass BPE is used for inward and outward transfer of a WT into a parallel work flow. In the bypass, both a manual workstation (Stopper VSE or VSEB) and an automatic station (indexing […]

Make a request
Find out more

Drive unit for BPBE-140 compl

Find out more

The bypass belt permits the installation of two parallel conveying sections with only one drive unit. The distance between the two conveyor belts is 12 mm. Consequently, the inward and outward […]

Make a request
Find out more

Drive unit for BPBE-185 compl

Find out more

The bypass belt permits the installation of two parallel conveying sections with only one drive unit. The distance between the two conveyor belts is 12 mm. Consequently, the inward and outward […]

Make a request
Find out more

Drive unit for BPBE-250 compl.

Find out more

The bypass belt permits the installation of two parallel conveying sections with only one drive unit. The distance between the two conveyor belts is 12 mm. Consequently, the inward and outward […]

Make a request
Find out more

Bypass BPE right without drive for TB-140

Find out more

The two-part bypass BPE is used for inward and outward transfer of a WT into a parallel work flow. In the bypass, both a manual workstation (Stopper VSE or VSEB) and an automatic station (indexing […]

Make a request
Find out more

Bypass BPE left without drive for TB-185

Find out more

The two-part bypass BPE is used for inward and outward transfer of a WT into a parallel work flow. In the bypass, both a manual workstation (Stopper VSE or VSEB) and an automatic station (indexing […]

Make a request
Find out more

Bypass BPE left with drive for TB-185

Find out more

The two-part bypass BPE is used for inward and outward transfer of a WT into a parallel work flow. In the bypass, both a manual workstation (Stopper VSE or VSEB) and an automatic station (indexing […]

Make a request
Find out more

Bypass BPE left with drive for TB-250

Find out more

The two-part bypass BPE is used for inward and outward transfer of a WT into a parallel work flow. In the bypass, both a manual workstation (Stopper VSE or VSEB) and an automatic station (indexing […]

Make a request
Find out more

Basic Conveyors BTB

Find out more

Montech Basic Conveyors BTB are used to carry parts to or from the various manufacturing stations, or combined to form complete production lines. Thanks to the compact design, the Basic […]

Make a request
Find out more

Minidrive Conveyors KTB

Find out more

Montech Minidrive Conveyors KTB are used to carry parts to or from the various manufacturing stations, or combined to form complete production lines. Thanks to the compact design and integrated […]

Make a request
Find out more

Conveyors TB

Find out more

Montech Conveyors TB are used to carry parts to or from the various manufacturing stations or combined to form complete production lines. Thanks to the modular design, they are very suitable for […]

Make a request
Find out more

Max Conveyors GTB

Find out more

Montech Max Conveyors GTB are used to carry parts to or from the various manufacturing stations, or combined to form complete transport systems. The modular construction of the system permits simple […]

Make a request
Find out more

Solar Conveyor SOLTB

Find out more

The Solar Conveyors SOLTB are used as feed or removal conveyors or for interlinking entire production lines; they are available with flat belts or as a special version with toothed belts. The Solar […]

Make a request
Find out more

Unloading Conveyor SOLTB-E

Find out more

The Unloading Conveyor SOLTB-E is a conveyor with two belts consisting of a stationary and an extendable part with a stroke 160 mm. The extendable part is driven by a pneumatic cylinder.The Unloading […]

Make a request
Find out more

Removal Module SOLTB-ASM-104x144

Find out more

Removal Modules SOLTB-ASM-104x144 are pneumatically driven modules that can be used for individual removal or, combined in different configurations, for multiple removals. They are used together with […]

Make a request
Find out more

Swiveling Conveyor SOLTB-S

Find out more

With the Swiveling Conveyor SOLTB-S can detective products be removed in the line. Due to the centrally located drive, the Swiveling Conveyor has no protruding edges. The conveyor can be installed […]

Make a request
Find out more

Short Conveyor SOLTB-K

Find out more

The Short Conveyor with its small dimensions is used to check wafer edges.• Chassis width: 114 mm• Roller spacing: 81 mm• Weight: 0.550 kg• Required drive torque: 0.5 Nm• Noise pressure level: […]

Make a request
Find out more

Centering Conveyor SOLTB-Z

Find out more

The Centering Conveyor is used for centering 125x125 mm and 156x156 mm wafers, after unloading, prior to loading carriers or before measuring and test equipments.• Centering widths: 125 x 125 […]

Make a request
Find out more

Vacuum conveyor SOLTB-V

Find out more

The Vacuum Conveyor that, compared to the Solar conveyor, offers more dynamic acceleration and braking curves and higher travel speed.

Make a request
Find out more

Lifting device HE-100

Find out more

Designed as a compact and extremely stable unit for short, straight movements, the Lifting Unit HE is predominantly used at increased moment load.The ratio of extended to retracted length is optimal, […]

Make a request
Find out more