Peripheral equipment / accessories

Offers from 1 to 52 of 197

High-frequency generator Z82 BS MED

Find out more

The safe and practical alternative for systems for packaging solutes in glass or plastic flasks. HEALTHCARE SAFETY Sterility is preserved because no air needs to be added (sterilisation at 121°c). […]

Make a request
Find out more

Mixer Type V

Find out more

The V pre-mixers are the larger relations of the KK and G mixers. They really show what they are capable of with high machine throughputs: up to 400 kilograms per hour do not present a problem. The […]

Make a request
Find out more

Grain station type Kö

Find out more

Each chamber must be filled equally before it is emptied. Any excess grains on the feed roller are scraped off. At a constant speed, it is possible to achieve extremely accurate doses. Save on dye […]

Make a request
Find out more

HAD Hot air dryers

Find out more

 Mod. HAD 30 - Airflow  ( m /h) : 70 - Max. temp.  (° C ) : 140 - Heat. pow.( kW) : 1,6 - Blow. pow. ( kW) : 0,08 - Total pow ( kW) : 1,68 - Voltage  (V/H) : 230/50 - Volume […]

Make a request
Find out more

D820P-D830P dessicant dryers

Find out more

D820P - Air flow (m3/h) :  2200 - Process temperature NT (°C ) :60-100 - Process temperature MT (°C ) : 60-150 - Process temperature HT (°C ) : 60-190 - Dew point (°C) : -60 - […]

Make a request
Find out more

Dessicant dryers D800-D802

Find out more

D800 - Air flow (m3/h) : 80 - Process temperature NT (°C) : 0 - Process temperature MT (°C) : 60-150 - Process temperature HT (°C) : 60-190 - Dewpoint (°C) : -40 - Static pressure […]

Make a request
Find out more

See all offers from MAT

Temperature control unit for water up to 90 °C : 90smart

Find out more

RT70 control system with 3.5" TFT display, Simple to operate, Pump with high flow rate: 60 l/min, optional 70 l/min, immersion pump and Solid-state relay instead of heating contactor.

Make a request
Find out more

Pressurised-water temperature control unit up to 140 °C : P140smart

Find out more

Microprocessor-controlled control system RT70, Pumps with high pumping capacity : 45 l/min, Leak-free pump with magnetic coupling, Water circuit of non-rusting materials and High cooling and heating […]

Make a request
Find out more

The temperature control unit for water up to 90 °C : 90S

Find out more

Microprocessor-controlled control system RT100, Pump with high pumping capacity: 60 l/min, optional 70 l/min, Solid-state relay instead of heating contactor and immersion pump.

Make a request
Find out more

See all offers from REGLOPLAS FRANCE

W833 Tandem

Find out more

This Wittman's products is suitable for applications such as robots that can be mounted on a single horizontal axis to share the work space in an analytical time of application. The axes which […]

Make a request
Find out more

G-Max Blade mill / vertical / for plastics

Find out more

Combining energy saving, a compact footprint and a unique damper cutting chamber for significant noise reduction, ensuring a quiet and efficient operation. Portable device, allowing greater […]

Make a request
Find out more

Junior 3 Compact Blade grinder granulator / horizontal / for plastics

Find out more

JUNIOR 3 Compact The JUNIOR 3 Compact screenless granulator is dedicated to processing especially hard and brittle materials, including styrenes, acrylics, and glass-fiber reinforced resins. It is […]

Make a request
Find out more

See all offers from WITTMANN BATTENFELD

Temperature Controller Single Zone ( Hot Runner Controls ) Type 1ZX

Find out more

The 1ZX- Single zone controller is part of the new generation of SISE temperature controllers, featuring a dual display and a unique user-friendly "Click and Rotate" dial.   The […]

Make a request
Find out more

Water Mold Controller Type 95 E6/9 S4

Find out more

The 95 E 6/9S4- 90 °C water mold controller in 6 or 9 kW is the most compact of the S.I.S.E. range. It is equipped in standard with a  60 L/min – 3.5 bar submersible pump, able to […]

Make a request
Find out more

Oil Mold Controller Type 210 H6/12E

Find out more

The mold controllers  of the 210 H6/12E range operate with oil up to a temperature of 210°C or 250°C (option).    The temperature controllers are equipped with a 60L/min […]

Make a request
Find out more

See all offers from SISE SAS

Hot Air Welding Hand Tool : Miller Weldmaster - EliteAIR

Find out more

High-Powered Hot Air Hand Tool For all Industrial Fabrics The EliteAIR is a versatile handheld welding tool for completing welds for hard to access seams on finished products. The EliteAIR can be used […]

Make a request
Find out more

Welding Machine to manufacture Keder T300

Find out more

The T-300 Keder system is built to weld keder as fast as possible. With welding speeds up to 100ft per minute, the T-300 Keder system will make rolls of keder as fast as your customers order them. The […]

Make a request
Find out more

118 Custom Sidewalls Welding System

Find out more

The Miller Weldmaster 118 Custom Sidewall/Pool Beading Machine allows you to make custom walls for your pool customer without keeping a large variety of material patterns. This machine will allow you […]

Make a request
Find out more

See all offers from DOREY S.A.

Special cooling systems

Find out more

Environmental restrictions, the search for new transformation processes or the development of new products require new cooling systems, which may require you to develop new processes or equipment, […]

Make a request
Find out more

Vacuum calibration bath

Find out more

YVROUD offers a wide range of vacuum calibration bath for tubes or profiles. Many variants and adaptations are available depending on the intended application, removable spray chamber, guides adapted […]

Make a request
Find out more

Immersion and spraying bath

Find out more

YVROUD offers a wide range of immersion and/or spraying bath of different lengths. Many variants and adaptations are available depending on the intended application, guides adapted to the form of the […]

Make a request
Find out more

See all offers from YVROUD

Cooling Zones

Find out more

Forced fresh air blown on the cured pieces (temperature drops from 180 to 40 °C)”. Forced fresh air blown on the cured pieces (temperature drops from 180 to 40 °C)

Make a request
Find out more

Software for injection molding machines : VALplast

Find out more

VALplast facilitates robot handling of machine loading/unloading processes as well as operations at the foot of the press, allowing integrators to quickly and easily program applications.   […]

Make a request
Find out more

Manual cutting system

Find out more

For use with roll material, such as paper, corrugated board or film, our successful roller dispenser cutting systems can be deployed either as freestanding cutter stands or integrated in the packing […]

Make a request
Find out more

Junior 3 Knife mill / rotor / vertical / for rubber

Find out more

JUNIOR 3  Low feed height and large top feed opening allows for easy use by means of sprue picker, conveyor belts, parts separators, or dumping the content of a box by hand. Compact design due to […]

Make a request
Find out more

Feed hopper / for plastics / for machines

Find out more

Machine hoppers ranging in size from 3 l to 60 l guarantee the optimum volume of the material inventory to the total material throughput and thus, the performance of the entire system.   […]

Make a request
Find out more

GRAVIMAX G14 Granulates batch blender / gravimetric / for the plastics industry

Find out more

The new GRAVIMAX B14 blender with material hoppers and their valves designed to prevent "bridge building" that prevents feeding of the plastic. Handles 1 kg batch sizes, with 40 mm valve and […]

Make a request
Find out more

GRAVIMAX G34 Granulates batch blender / gravimetric / for the plastics industry

Find out more

The GRAVIMAX G34 is based on the GRAVIMAX G14. It has a total material throughput of up to 200 kg/hr – and this increased capacity meets the demands of most injection molding applications. The […]

Make a request
Find out more

GRAVIMAX 5 series Granulates batch blender / gravimetric

Find out more

Weighing 5kg or 11lbs, this unit has six maximum components with a 50mm or 2" valve. The hopper size of 1-4 is 94lbs, while the hopper size of 5-6 weighs 40lbs. Batch size: 5 kg (11 lbs.) Valve: […]

Make a request
Find out more

GRAVIMAX 9 series Granulates batch blender / gravimetric

Find out more

Technical specifications: Batch size: 9 kg (20 lbs.) Valve: 75 mm (3)" Lid prepared for: FEEDMAX 300 series Max. number of components: 8 Hopper size 1–4: 79 l Hopper size 5–8: 34 l

Make a request
Find out more

GRAVIMAX 18 series Granulates batch blender / gravimetric

Find out more

It comes in the batch sizes of 9 kg (20 lbs). The Valve dimensions are 75 mm (3)". The lid for this device is suited for FEEDMAX 300 series. It has a maximum of 8 components. The Hopper size for […]

Make a request
Find out more

GRAVIMAX 27 series Granulates batch blender / gravimetric

Find out more

Technical specifications:   Batch size: 27 kg (60 lbs.) Valve: 150 mm (6") Lid prepared for: FEEDMAX 400 series Max. number of components: 8 Hopper size 1–4: 158 l Hopper size […]

Make a request
Find out more

MAS 2A Blade mill / horizontal / miscellaneous waste / for injection molding

Find out more

Under-the-press Granulators Scrap is gravity-fed directly from the processing machine, requiring no conveying or manual handling. Feed from 3-plate mould, or robot/sprue picker with a feed hopper over […]

Make a request
Find out more

DRYMAX E30, E60 Dry air dryer / batch / for plastic pellets / cooler

Find out more

The DRYMAX series dry air dryers are equipped with two desiccant beds to supply continuous dry process air and constant quality for the perfect drying of plastic resin.   »» Dew Point […]

Make a request
Find out more

PDC Dry air dryer / batch / for plastic pellets / for cleaning

Find out more

The PDC compact dryer option enables the highest flexibility with the integration of a side channel blower and the connection of up to two material consumers. »» Maintenance Free Vacuum […]

Make a request
Find out more

DRYMAX G30, G70, G120 Dry air dryer / batch / for plastic pellets / cooler

Find out more

ATON basic segmented wheel segments desiccant beads in to multiple chambers of the rotating wheel. This provides maximum energy efficiency and allows for easy replacement of the desiccant beads as an […]

Make a request
Find out more

DRYMAX Aton VS Dry air dryer / batch / for plastic pellets / for cleaning

Find out more

The VS compact dryer option for the ATON plus allows for the integration of a vacuum blower in the frame under the drying unit. Many conveying units can be connected to this blower. Thus maximum […]

Make a request
Find out more

DRYMAX E 180–1200 Desiccant dryer / batch / for plastic pellets

Find out more

The DRYMAX battery dryer series are equipped with two desiccant beds and therefore provide continuous process air and constant dry air quality for the perfect drying of plastic resin. »» […]

Make a request
Find out more

SILMAX E Feed hopper / drying

Find out more

The SILMAX drying hoppers with integrated microprocessor control are availablein table versions from 100 up to 1,200l.   »» Robust Stainless Steel Execution All components in contact […]

Make a request
Find out more

SILMAX compact G30 - G150 Feed hopper / drying / for plastics / mobile

Find out more

SILMAX compact drying hoppers are designed for battery drying systems as well as compact portable systems. Battery drying systems are available with either 2 or 3 independent drying hoppers. […]

Make a request
Find out more

DOSIMAX MC 30 Dosing control system

Find out more

Using the DOSIMAX MC 30, the dosing process is executed in three steps:   1. Placing the dosing unit on the calibrator and entering the production values. 2. The calibration result will be […]

Make a request
Find out more

TEMPRO plus D90 Temperature controller with touchscreen / thermoelectric / hot runner

Find out more

Latest design technology and operation … In pressurized operation, a gauge ensures that the internal pressure is always 1 bar min. over the steam pressure curve. Because of the smaller heat […]

Make a request
Find out more

TEMPRO plus D140, 180 Temperature controller with touchscreen / pressurized water / hot runner

Find out more

Latest design technology and operation … In pressurized operation, a gauge ensures that the internal pressure is always 1 bar min. over the steam pressure curve. Because of the smaller heat […]

Make a request
Find out more

TEMPRO plus 250 Digital thermal regulator / circulating oil / for injection molding machines

Find out more

The Wittman Battenfeld TEMPRO Plus-250, a user-friendly temperature controller, specially features the following properties/specifications: a built-in pinpoint-precision microprocessor control with […]

Make a request
Find out more

TEMPRO plus XL 90 Digital temperature regulator / circulating water / for injection molding machines

Find out more

The WITTMANN‘s TEMPRO plus XL 90 can heat up even on big molds within a short time to the required setting point. It has a 200 l/min flow and 36kW heater as well as a cooling capacity. It […]

Make a request
Find out more

TEMPRO primus/basic Digital temperature regulator / circulating water / for injection molding machines

Find out more

» The Economic Solution The ideal temperature controller for any application requiring exact temperature control and high user-friendliness, however without additional functions such as direct […]

Make a request
Find out more

TEMPRO basic C120 Temperature controller with touchscreen / with direct cooling / hot runner

Find out more

The TEMPRO basic C120 was designed for the special requirements of specific applications. It is equipped with radial pumps for high flow volumes at different pressure ranges: an economic mold […]

Make a request
Find out more

TEMPRO primus C120 Temperature controller with touchscreen / with direct cooling / hot runner

Find out more

The TEMPRO primus C120, assembled by Wittmann Battenfeld, features a temperature controller that presents users an uncommon high cooling capacity. This device is best suited for various applications […]

Make a request
Find out more

COOLMAX 40 Compact Cooling Units by WITTMANN

Find out more

» Powerful, compact air cooled chillers with 10 kW to 89 kW cooling capacity. » Reliable WITTMANN microprocessor controller » Large surfaced built-in air condenser with fan neck. […]

Make a request
Find out more

Oil Mold Controller Type 180 H9IE

Find out more

The mold controllers  of the 180 H9IE range operate with oil up to a temperature of 180°C.   The temperature controllers are equipped with a 60L/min submerged pump with max 3.5 bars of […]

Make a request
Find out more

Water Mold Controller Type 95 9/18/27/36/45E

Find out more

The new water mold temperature controllers from the 95 E9/18/27/36/45E range operate up to 90°C and offer heating power of 9, 18, 27, 36, and 45 kW.    Any of them can be equipped with […]

Make a request
Find out more

Water Mold Controller Type 95 6/9/12/15/18 IE3

Find out more

The  mold controllers of the 95E 6/9/12/15/18 IE3 range operate with water up to 90°C and offer heating powers of 6, 9,12, 15, or 18 kW.  Any of them can be equipped with 60 or 70 l/min […]

Make a request
Find out more