Carcassing

Offers from 1 to 52 of 162

Pumping System : DIP Systeme® 11

Find out more

Clean and connected Direct inline Pumping system No wet well Engine with cage three-phase 50Hz/60Hz- IE3 - Classify F - IP67 as standard. Vortex effect hydraulics with complete passage (DIPCut […]

Make a request
Find out more

Lift pump PM 100

Find out more

Engine with cage three-phase 50Hz normalized - Classify F - IP67 as standard Hydraulics with effect Whirlpool. Strong capacity of inhalation. Consequent complete passage from 70 mm to 150 mm admitting […]

Make a request
Find out more

I-plus profile

Find out more

These Sadef I-plus building components can be used for residential as well as industrial buildings as roof purlins, side rails or mezzanine floors.Sadef-sections are provided with the necessary holes […]

Make a request
Find out more

CEE - CEE-plus profile

Find out more

These Sadef CEE and CEE-plus building components can be used for residential as well as industrial buildings as roof purlins, side rails or mezzanine floors.Sadef-sections are provided with the […]

Make a request
Find out more

SIGMA - SIGMA-plus profile

Find out more

Cold-rolled Sadef Sigma and Sigma-plus sections for buildings are made from continuous, hot-dip galvanized steel sheet. They are manufactured on modern rolling lines and meet the highest quality […]

Make a request
Find out more

See all offers from SADEF

Flat roof waterproofing stagnating water

Find out more

Used to provide a long-lasting waterproof membrane on roofs and terraces with 0% slope, ARCATHANE is a liquid, elastic modified polyurethane membrane based on innovative technology - long-chain […]

Make a request
Find out more

Liquid waterproof membrane

Find out more

ARCAROOF is a an elastomeric waterproof membrane. It applies like a paint. ARCAROOF repairs and waterproofs flashings, cracks or broken roof tiles. ARCAROOF can be applied over : concrete, fibre […]

Make a request
Find out more

Waterproofing paint balconies decks terraces Decorative and protective paint for surfaces subject to foot traffic

Find out more

ARCADECK is designed to waterproof terraced areas built on porous substrates. ARCADECK will not modify the original structure with added weight or size. Our waterproofing solution is ideal to […]

Make a request
Find out more

See all offers from ARCANE INDUSTRIES

Chemicals for building and paint

Find out more

ALUMINIUM AMMONIUM SULPHATE      BARIUM CARBONATE      BENTONITE      CALCIUM FLUORIDE      CALCIUM FORMATE      CALCIUM […]

Make a request
Find out more

U profile

Find out more

Sadef offers an unbeatable range of U sections- up to 300 mm profile height,- 8 mm sheet thickness and- and with a steelgrade up to S600Sadef-sections are provided with the necessary holes and […]

Make a request
Find out more

IS -plus profile

Find out more

Cold-rolled Sadef IS-plus sections for buildings are made from continuous, hot-dip galvanized steel sheet. They are manufactured on modern rolling lines and meet the highest quality standards.Sadef […]

Make a request
Find out more

ZED profile

Find out more

Sadef offers an unbeatable range of ZED sections,- up to 450 mm height,- 5 mm sheet thickness and- profile lengths up to 20 m.They can be foreseen of integrated connections in order to facilitate […]

Make a request
Find out more

Integrated connections: Auto Connect Middle (ACM)

Find out more

The new Sadef sections are now even simpler to join. From now on, 2 bolts are sufficient to join the components, as the brackets are fully integrated into the sections. Thanks to the integrated […]

Make a request
Find out more

Integrated connections: Auto Connect End (ACE)

Find out more

The new Sadef sections are now even simpler to join. From now on, 2 bolts are sufficient to join the components, as the brackets are fully integrated into the sections. Thanks to the integrated […]

Make a request
Find out more

Integrated connections: Auto Notch (AN)

Find out more

The new Sadef sections are now even simpler to join. From now on, 2 bolts are sufficient to join the components, as the brackets are fully integrated into the sections. Thanks to the integrated […]

Make a request
Find out more

Solar systems

Find out more

Steel frames for solar systems can be realised in a very competitive and assembly friendly way, by using the following Sadef pre-engineered products: CEE, CEE-plus, Sigma and Sigma-plus  […]

Make a request
Find out more

FLOOR systems

Find out more

Sadef has developed several fast track building systems for the realization of all sorts of floor constructions. By using integrated connections in the sections, floors can be assembled fast and with […]

Make a request
Find out more

WALL systems

Find out more

Sadef has a pre-engineered system for load bearing walls which allows the contractor to assemble wall or façade elements in a fast and economical way. This systems can also be recommended for […]

Make a request
Find out more

Sadef-Wall system

Find out more

Sadef wall systems enable you to realize the walls of a building in a fast way. The perforation in track and stud profile is designed for easy and quick positioning and connection.The perforation in […]

Make a request
Find out more

Purlin & side rail systems: On steel frames

Find out more

SADEF purlin & side rail systems give the possibility to span in a very light-weight way from frame to frame. Frame distances of more than 15 meters are possible thanks to the profile heights up […]

Make a request
Find out more

Purlin & side rail systems: On wooden frames

Find out more

SADEF purlin & side rail systems give the possibility to span in a very light-weight way from frame to frame. Frame distances of more than 15 meters are possible thanks to the profile heights up […]

Make a request
Find out more

Purlin & side rail systems: On concrete frames

Find out more

SADEF purlin & side rail systems give the possibility to span in a very light-weight way from frame to frame. Frame distances of more than 15 meters are possible thanks to the profile heights up […]

Make a request
Find out more

Portal frame systems

Find out more

Steel frames for portal frame systems can be realised in a very competitive and assembly friendly way, by using the following Sadef pre-engineered products: I-plus, IS-plus, Sigma-plus and CEE-plus […]

Make a request
Find out more

Truss-systems

Find out more

Sadef offers a pre-engineered truss system that allows the building contractor to realize his building in a fast and economical way.Sadef trusses, lattice joists (e.g. prefabricated truss solutions) […]

Make a request
Find out more

Industrial Buildings

Find out more

By using SADEF pre-engineered building profiles, industrial building contractors have the possibility to optimise the steel frame of a building.- Pre-engineered building systems- Fast and easy […]

Make a request
Find out more

Residential buildings

Find out more

Houses, apartments etc. Using Sadef fast track building systems for floors, walls and roofs is the most cost conscious way of montage.- Pre-engineered building systems- Fast and easy assembly- […]

Make a request
Find out more

Custom Roll Forming

Find out more

Rollforming is the making of a profile out of a steel strip. The forming is progressive and involves a number of rollforming stations with top and bottom rollers. The process is continuous and each […]

Make a request
Find out more

Open & welded sections

Find out more

The interchangeable tooling of thousands of existing section shapes allows Sadef to supply a perfect steel section in the right material (e.g. stainless steel, precoated steel, pregalvanised […]

Make a request
Find out more

Custom Roll Formed Profiles: 3D Bending

Find out more

Bending of profiles in various processes is a speciality of Sadef. Mandrelbending for radii between 70 and 5500 mm, press- or stretchbending for complex shapes and sweeping to wide radii are […]

Make a request
Find out more

Industrial Buildings: Primary steel frames

Find out more

Big spans up to 50m can be realised in SADEF pre-engineered building profiles. This complete steel frame is made of SADEF Sigma-plus and Cee-plus profiles. By using other design and detailing concepts […]

Make a request
Find out more

Industrial Buildings: Secondary steel frames

Find out more

SADEF purlin & side rail systems give the possibility to span in a very light-weight way from frame to frame. Frame distances of more than 15 meters are possible thanks to the profile heights up […]

Make a request
Find out more

Industrial Buildings: Export projects

Find out more

Steel frames out of sadef pre-engineered profiles lead to light weight and assembly friendly solutions. They are especially recommended for far export projects due to- Compact bundling possibility- […]

Make a request
Find out more

Twine pole

Find out more

for versatile use in road construction, uncoated, made of commercial steel grade with forged tip for easy driving in ground, available in different dimensions, including bevel

Make a request
Find out more

LPR1000 Roof systems Superior performance

Find out more

Long span ribbed panel. Single skin roof with or without isobloc: • This system is the most economical • The insulation is made of soft faced glass fiber providing a good […]

Make a request
Find out more

LMR600 Roof systems

Find out more

Standing seam roof mechanically fixed using unique sliding clips. Single skin roof with or without isobloc: • This system is the most cost-effective • The insulation is made of soft faced […]

Make a request
Find out more

Polar roof system

Find out more

The Polar roof is a complete roof system based on sandwich panels. It includes all necessary framed openings, fasteners and finishing flashings. Polar panels consist of two profiled ribbed coated […]

Make a request
Find out more

Spacetec/Multitec built-up roof systems

Find out more

Both low pitch roof systems consist of ribbed steel panels and allow the application of a built-up roof system. The Spacetec roof system is purlin-free, the panels are directly fixed to the upper […]

Make a request
Find out more

Wall systems : LPA900 - LPD1000

Find out more

The LPA900 - LPD1000 consist of ribbed steel panels, externally fixed to the secondary framing with self-drilling screws with composite nylon heads, coloured to match the sheeting. Inside sheeting Two […]

Make a request
Find out more

Polar wall system

Find out more

The Polar wall is a complete wall system based on sandwich panels. It includes all necessary framed openings, fasteners and finishing flashings. Different insulation thicknesses and panel profiles […]

Make a request
Find out more

Sinutherm wall system

Find out more

The Sinutherm wall is a complete wall system based on sandwich panels with sinusoidal corrugation on the exterior panel and a slightly ribbed interior surface. Consisting of two coated steel panels, […]

Make a request
Find out more

Sinutec wall system

Find out more

Sinutec wall consists of sinusoidal, colour-coated steel panels, produced by cold roll forming, fixed horizontally to the secondary framing with self-drilling screws. Sinutec walls facilitate […]

Make a request
Find out more

Astrotherm insulation

Find out more

Astrotherm insulation consists of a fibre glass blanket with a laminated vapour barrier. Isoblocs significantly reduce thermal bridges and Alustrip improves the overall appearance of the insulation […]

Make a request
Find out more

Flexible mortar for cracks in facades or swimming pool

Find out more

ARCAFLEX is a flexible mortar for treatment of cracks or joints (including those in permanent immersion). It provides a durable treat or cracks in facades or in swimming pools, basins or  water […]

Make a request
Find out more

Integrated connections

Find out more

The new Sadef sections are now even simpler to join. From now on, 2 bolts are sufficient to join the components, as the brackets are fully integrated into the sections. Thanks to the integrated […]

Make a request
Find out more

Solar systems

Find out more

Steel frames for solar systems can be realised in a very competitive and assembly friendly way, by using the following Sadef pre-engineered products: CEE, CEE-plus, Sigma and Sigma-plus profiles.

Make a request
Find out more

FLOOR systems

Find out more

Sadef has developed several fast track building systems for the realization of all sorts of floor constructions. By using integrated connections in the sections, floors can be assembled fast and with […]

Make a request
Find out more

WALL systems

Find out more

Sadef has a pre-engineered system for load bearing walls which allows the contractor to assemble wall or façade elements in a fast and economical way. This systems can also be recommended for […]

Make a request
Find out more

Purlin & side rail systems

Find out more

SADEF purlin & side rail systems give the possibility to span in a very light-weight way from frame to frame. Frame distances of more than 15 meters are possible thanks to the profile heights up […]

Make a request
Find out more

Modular unit frame systems

Find out more

Lightweight and assembly-friendly steel building components enables you to construct light prefabricated modules. Similar to a meccano-system, thanks to our floor systems, these modules are […]

Make a request
Find out more

Truss-systems

Find out more

Sadef offers a pre-engineered truss system that allows the building contractor to realize his building in a fast and economical way. Sadef trusses, lattice joists (e.g. prefabricated truss solutions) […]

Make a request
Find out more

Light weight steel structure (Shelter and Emergency buildings)

Find out more

Light weight steel structure designed for earthquake resistance. The SADEF System is designed in such a way that buildings can be designed in almost any form and for one storey and multistorey […]

Make a request
Find out more

Ground systems

Find out more

Steel frames for solar systems can be realised in a very competitive and assembly friendly way, by using the following Sadef pre-engineered products: CEE, CEE-plus, Sigma and Sigma-plus profiles.

Make a request
Find out more