All you need to run your factory !
Sub-category +
Climatic test equipment (16)
Star categories
Products (98)
Products from 1 to 52 of 98
MAGTROL SA
Cogging Test System
MAGTROL SA
Magtrol's CTS Cogging Test System is a stand-alone test system designed to control and measure Detent Torque, Cogging Torque and Friction Torque. […]
MAGTROL SA
Custom Designed Motor Test Systems (test bench)
MAGTROL SA
Magtrol’s Customized Motor Test Systems (CMTS) are complete, customized turn-key test benches for any electric, hydraulic or pneumatic motors, […]
iiM AG measurement + engineering
Cold Impact Test
iiM AG measurement + engineering
Device details: ■ Device and operation are according to the standard IEC 60811-506 (IEC 60811-1-4) point 8.5 ■ Case set offers all required weights […]
iiM AG measurement + engineering
Cold Bend Test CBT
iiM AG measurement + engineering
Device details: ■ Device and operation according to the standard IEC 60811-504 ■ The complete set offers various spindles and cable guides with many […]
AVL FRANCE SAS
AVL Battery Test System
AVL FRANCE SAS
Evaluating Electrochemical Energy Storage AVL battery test systems support the evaluation and lifetime investigation of electrochemical energy storage […]
TEST
PC – Tastaturen Prüfmaschine : Model 110S
TEST
This broadened special model of the standard testing machine Model 110 has an integrated addressable XY-Table. By means of the software TesTWinner the […]
TEST
Special Testing Machines : Model 118
TEST
Electromechanic Linear Drives Mobile and / or Stationary Initially designed for mobile applications of force and moment tests on vehicle – […]
TEST
High-load machines up to 500 kn models 113,114,115
TEST
Models 113, 114 and 115 are two-column, stand-alone test units for universal use, with recirculating-ball spindles and two mounting spaces. The upper […]
TEST
Standard table-top test machines Model 106
TEST
Model 106 is a single-column unit. Like every TesT all-purpose, table-top testing machine, Model 106 is equipped with a DC motor and a […]
SIEMENS
InfoCenter Suite
SIEMENS
System data archiving, collecting and reporting tools for analysis.
IPTE
TUU - Turn Unit
IPTE
± 90° or 180° Configurable Smooth PCB Turning Lean Design - Optimized Footprint User Friendly Interface - LCD Touchscreen Easy […]
TECHNIVIB INTERNATIONAL
Simulator Premium
TECHNIVIB INTERNATIONAL
The Premium simulator is essentially dedicaced to the analysis and diagnosis of the two most common phenomena : Balancing study, Bearings defect […]
TECHNIVIB INTERNATIONAL
Simulator Master
TECHNIVIB INTERNATIONAL
The master simulator allows to mount optional study kits and to diagnose a lot of mechanical defects. • Variable speed 0-6000 RPM • […]
TECHNIVIB INTERNATIONAL
Gearbox simulator
TECHNIVIB INTERNATIONAL
The gearbox simulator is the perfect tool for the analysis and development of gearboxes.
TECHNIVIB INTERNATIONAL
Rotors simulator – Rotorkit
TECHNIVIB INTERNATIONAL
This simulator is a tool especially designed to study the dynamic behavior of a rotor in its oil lubricated sleeve bearings.
TECHNIVIB INTERNATIONAL
Structures simulator
TECHNIVIB INTERNATIONAL
This simulator is a tool especially designed to show and teach the basic principles of structural dynamics, resonance, damping...
TECHNIVIB INTERNATIONAL
Prognotics Simulator
TECHNIVIB INTERNATIONAL
These simulators are designed for industrial research applications or basic research. Among these benches have found in particular: • Prognostic […]
TECHNIVIB INTERNATIONAL
Wind Turbine simulator
TECHNIVIB INTERNATIONAL
Wind Turbine Simulator (WTS) has been designed to teach/learn the fundamental principles of wind energy technology from power generation to operation […]
FDM Della Marca
Constant Climate Chamber : CB-CS SERIES
FDM Della Marca
Set temperature and humidity of constant climate chamber and you have done half of the job. If your need is stability this is the right product to […]
FDM Della Marca
Cyclic Climate Chamber : CB-CS PRO SERIES
FDM Della Marca
Program your environment with the easiness of a touch screen. An automatic regulator will perform the best temperature and humidity simulation cycles […]
FDM Della Marca
Constant Temperature Chamber : TB-TS Series
FDM Della Marca
Set temperature and you have done half of the job. If your need is stability this is the right product to perform your simulations. The constant […]
FDM Della Marca
Material Test Chamber
FDM Della Marca
If your material samples testing need extra effort, we provide you with our special Material test chamber. Program your environment with the easiness […]
FDM Della Marca
Insect Growth Chamber
FDM Della Marca
The perfect light distribution with the right led type for the right specimens. This is your choice for bacteria, plants and insect growing. For […]
FDM Della Marca
Plant Growth Chamber
FDM Della Marca
The perfect light distribution with the right led type for the right specimens. This is your choice for bacteria, plants and insect growing. […]
FDM Della Marca
Tire stress test chamber
FDM Della Marca
REQUIREMENTS : During F1 races drivers sumbit cars to curve angles at a crazy speed. In these situations tyres need to grip to asphalt in the […]
FDM Della Marca
Climate chamber for keeping mice
FDM Della Marca
REQUIREMENTS : Research institutes and bio labs usually need special chambers to test plants or animals growth. But not always their needs encounter […]
FDM Della Marca
Climatic chamber / for frost resistance test
FDM Della Marca
The main samples, saturated with a 5% water solution of Sodium Chloride, are placed in a tank filled with the same solution in order to test the […]
BINDER GMBH
Constant climate chambers - KBF 720
BINDER GMBH
Temperature range: 0 °C to 70 °C Humidity range: 10 % to 80 % RH APT.line™ preheating chamber technology Humidity regulation with […]
BINDER GMBH
Constant climate chambers with ICH-compliant light source - Series KBF P
BINDER GMBH
Temperature range: 0 °C to 70 °C Temperature range with light: 10 °C to 60 °C Humidity range: 10 % to 80 % RH positionable […]
BINDER GMBH
Constant climate chambers with ICH-compliant light source and light dose control - Series KBF LQC
BINDER GMBH
Temperature range: 0 °C to 70 °C Temperature range with light: 10 °C to 60 °C Humidity range: 10 % to 80 % RH positionable […]
BINDER GMBH
Constant climate chambers with large temperature / humidity range - Series KBF
BINDER GMBH
Temperature range: -10 °C to 100 °C Humidity range: 10 % RH to 98 % RH APT.line™ preheating chamber technology Humidity regulation with […]
BINDER GMBH
Dynamic climate chambers for rapid temperature changes - Series MK
BINDER GMBH
Temperature range: -40 °C to 180 °C APT.line™ preheating chamber technology Programmable condensation protection for test material […]
BINDER GMBH
Dynamic climate chambers for rapid temperature changes with humidity control - Series MKF
BINDER GMBH
Temperature range: -40 °C to 180 °C Humidity range: 10 % to 98 % RH Integrated water-storage tank, 20 liters 4 zero-voltage relay contacts […]
BINDER GMBH
Dynamic climate chambers for rapid temperature changes with extended low temperature range - Series […]
BINDER GMBH
Temperature range: -70 °C to 180 °C 4 zero-voltage relay contacts that can be activated via MCS controller APT.line™ preheating chamber […]
BINDER GMBH
Dynamic climate chambers for rapid temperature changes with humidity control and extended low […]
BINDER GMBH
Temperature range: -70 °C to 180 °C Humidity range: 10 % to 98 % RH Integrated water-storage tank, 20 liters 4 zero-voltage relay contacts […]
ZOLLER EINSTELLEN
Smile 400
ZOLLER EINSTELLEN
Compact complete, convenient. This value-for-money ZOLLER presetting and measuring machine guarantees top-notch technology in small vertical format. […]
TEST
Screw testing machines Model 205
TEST
To master this application TesT has developed a special multi-component sensor, Model 201, as the measurement transducer for these screw testing […]
TEST
Elementary One-Pillar Testing Machines (500 N) : Model 101
TEST
With Model 101 TesT offers you a compact and lightweight one-pillar traction / compression testing machine. Due to its compact dimensions and […]
TEST
Elementary One-Pillar Testing Machines 1000 N : Model 102
TEST
With Model 102 TesT offers a compact one-pillar traction / compression testing machine as a C-Frame version. By means of its structural design, […]
TEST
Elementary One-Pillar Testing Machines 1000 N : Model 103
TEST
TesT Model 103 is a high-class testing machine for simple applications. The electric-motor-controlled, one-pillar machine impresses by its simple […]
TEST
Elementary Two-Pillar Testing Machines 5000 N : Model 104
TEST
Especially for our customers who have to carry out occasional and inexpensive material or component tests for incoming goods inspections or production […]
TEST
Elementary Two-Pillar Testing Machines 5000 N : Model 105
TEST
Model 105 is a very robust electric-motor-driven testing machine that offers all well-proven qualities of TesT-testing machines at a remunerative […]
TEST
Tabletop - Testing Machines 2 kN : Model 106
TEST
Model 106 is a single-spindle machine covering a force range of up to 2 kN. The intelligent plug-in-board PC-Card 822 is to be connected directly at […]
TEST
Tabletop - Testing Machines 2 kN, 5 kN : Model 108
TEST
From our range of products Model 108 is the first two-pillar PC-controlled testing machine for force ranges of up to 5kN. Both width and height of the […]
TEST
Tabletop - Testing Machines 500 N, 2 kN : Model 110
TEST
Model 110 has especially been designed for medical technologies, food technologies, and micromechanics or microelectronics. Basic structure is a […]
TEST
Stand Alone Testing Machines 50 kN, 100 kN : Model 113
TEST
Model 113 is a stand-alone-machine with testing frame for measuring ranges between 50 and 100 kN. It is optionally possible to control by means of the […]
TEST
Stand Alone Testing Machines (200 kN, 250 kN, 300 kN, 400 kN) : Model 114
TEST
Model 114 is a stand-alone-maschine with a very stiff testing frame for measuring ranges between 200 and 400 kN. Due to the dimensioning of the load […]
TEST
Stand Alone Testing Machines 500 kN, 600 kN : Model 115
TEST
Model 115 is a stand-alone-maschine for measuring ranges between 500 and 600 kN. It is optionally possible to control by means of the plug-in-board […]
TEST
Packaging Testing Machine : Model 112BCT
TEST
Packagings are the dividing element between the product for packing and the environment.Requirements for stackability and stability are always on the […]
TEST
Testing Machine with Kiln for High-Temperature Tests on Platinum : Model 113S
TEST
Model 113S, for Platinum Tests at Temperatures of up to 1.700° CThis broadened special model of the standard testing machine Model 113 contains a […]
TEST
Testing Machine for Car - Dashboards : Modell 112S
TEST
Modell 112S, for Tests of Entire Motor Vehicles - DashboardsThis broadened special model of the standard testing machine Model 112 has a clamping tool […]
TEST
Testing Machine for Bending Tests on Safety Glass : Modell 112S
TEST
Modell 112S, for Bending Tests of Vehicle – Glass PanesIncreasing requirements for vehicle safety demand reliable material tests on auto […]
Users who saw this also viewed
Most popular categories
Industrial paint - Lift truck - Hydraulic pumps - Storage platform - Switches - Cables - Construction site equipment - Label printers, Barcode printers - Safety packing - Plastic raw materials - Welding equipment - Safety shoes - Industrial Lockers - Conveyor belts - Closed circuit TV camera - Pressure sensors - Scrubbers - Machine tools - Storage shed - Industrial Connectors - Marking and CodingFind your suppliers
Complete your request and let our teams find you the best deals available.
Find your future clients
List your products and services to enhance your web presence and receive qualified enquiries.
